Instruction d'utilisation Regalo FLEXI GATE FORM 1175

Résumé du contenu de la page N° 1

FLEXI GATE form
MODEL NO:1175/1180
Owner’s Manual
READ ALL INSTRUCTIONS BEFORE ASSMBLY AND
USE OF GATE. KEEP INSTRUCTIONS FOR FUTURE USE.
Regalo International, LLC.
14305 Southcross Drive, Suite 100,
Burnsville, MN 55306
Phone: 952-435-1080
FAX: 952-435-1088

Résumé du contenu de la page N° 2

Flexi Gate from ADDITIONAL EXTENSIONS SOLD SEPARATELY! WARNING: Intended for young children aged six months through 24 months. Check the gate regularly to see if all the hardware and mountings are tight. To prevent serious injury or death, securely install gate or enclosure and use according to manufacturer’s instructions. Never use with a child able to climb over or dislodge the gate or enclosure. Never leave child unattended. Use only with the locking/latching mechanism securely engaged.

Résumé du contenu de la page N° 3

Check to make sure you have the following components before you begin to set up your gate. (1). Folded Gate Frame, and Wall Mounting Assembly (2). Mounting Screws x 8 pcs. (1) 1 pc (2) 8 pcs (2)

Résumé du contenu de la page N° 4

Step 1. Preparing to Install your Gate Begin by unfolding the gate frame. To do this simply loosen the Locking Knobs at each pivoting joint by turning the knob counter clockwise as shown in Diagram 1. Loosen the knobs enough to allow the gate to swing open freely. Diagram 1 (3)

Résumé du contenu de la page N° 5

Step2: Move the gate to the side of the wall opening then bring the Wall Mounting Hinge to the wall as shown in Diagram 2. Diagram 2 (4)

Résumé du contenu de la page N° 6

Step 3: Apply a screw driver to fix the Wall Mounting Hinge on to the wall as shown in Diagram 3. Diagram 3 Step 4: Repeat the Step 2 and 3, on the other end of the gate. Go back an tighten all Locking Knobs. When this is done, the gate is ready to use on the gate opening. (5)