Résumé du contenu de la page N° 1
INSTALLATION, USE & CARE MANUAL
FREESTANDING GAS RANGES
Models PRO30 4 GAS X [M7S0GNU7X (2,5)A]
Models PRO30 4 GAS AR [M7S0GNU7S (2,5)A]
Models PRO30 4 GAS BI [M7S0GNU7W (2,5)A]
Models PRO30 4 GAS NE M7S0GNU7N (2,5)A]
Models PRO30 4 GAS RO [M7S0GNU7R (2,5)A]
Models PRO30 4 GAS VI [M7S0GNU7L (2,5)A]
cod. 310815
1
Résumé du contenu de la page N° 2
From the desk of the President Dear new owner of a Bertazzoni product, I want to thank you for choosing one of our beautiful PRO ranges. We know that you have many brands and products to choose from and we are thrilled that you have decided to take onw of your products into your home. We take as much pride in making our ranges as we hope you will in owning them. My family started manufacturing cooking appliances in 1882. Each of BERTAZZONI SpA our products is a blend of Ital
Résumé du contenu de la page N° 3
TABLE OF CONTENTS WARRANTY AND SERVICE ......................................................................................................................... 4 CUSTOMER SERVICE ....................................................................................................................................................... 4 REPLACEMENT PARTS .................................................................................................................................................
Résumé du contenu de la page N° 4
WARRANTY AND SERVICE All Bertazzoni products carry a 2 year parts and labor warranty. Service on all Bertazzoni products shall be carried out by factory‐trained professionals only. For warranty service please contact Customer Service at the numbers indicated below. CUSTOMER SERVICE English/spanish hotline (866) 905‐0010 French (800) 561‐7625 Fax (714) 428‐0040 Email BERTAZZONIHELP@SERVICEPOWER.COM Mailing address SERVICEPOWER 1503 South Coast drive Suite 32
Résumé du contenu de la page N° 5
WARNING! IMPORTANT SAFETY INFORMATION Read this instruction booklet before installing PLEASE READ AND FOLLOW THESE IMPORTANT and using the appliance. INSTRUCTIONS FOR THE SAFETY OF YOUR HOME The manufacturer will not be responsible for AND OF THE PEOPLE LIVING IN IT. any damage to property or to persons caused by Save this Manual for local electrical inspector’s incorrect installation or improper use of the use. appliance. Read and save these instructions for future The manufac
Résumé du contenu de la page N° 6
PRODUCT SPECIFICATIONS Dimensions (insert drawings front, side and back Weight Burner power Natural gas LP gas Auxiliary 3730 BTU/h 3750 BTU/h Semi‐rapid 6000 BTU/h 6300 BTU/h Rapid 10400 BTU/h 11400 BTU/h Dual burner (inner) 2730 BTU/h 2900 BTU/h Dual burner ( outer) 15000 BTU/h 16400 BTU/h Oven 14500 BTU/h 14500 BTU/h broiler 12000 BTU/h 12000 BTU/h 6
Résumé du contenu de la page N° 7
BEFORE INSTALLATION WARNING! This appliance shall only be installed by an authorized professional. Do not use aerosol sprays in the vicinity of this appliance while it is in operation This appliance shall be installed in accordance with the manufacturer’s installation instructions. ROOM VENTILATION: An exhaust fan may be used with the appliance; in each case it shall be This appliance must be installed in accordance installed in conformity with the app
Résumé du contenu de la page N° 8
INSTALLING THE LEGS INSTALLING THE WORKTOP FRONTGUARD Bertazzoni ranges must be used only with the legs properly installed. To increase the clearance between the front edge of the worktop and the burners it is possible to Four height‐adjustable legs are shipped with the install the worktop frontguard shipped with the range in the polysterene container situated over appliance. the appliance. To install the front guard, hold it with the pointed Before installing the legs, position t
Résumé du contenu de la page N° 9
INSTALLING THE BACKGUARD The backguard must be installed prior to operation of the appliance for appropriate ventilation of the oven compartment. The supplied backguard is a 2‐part assembly. The box also contains a set of metal screws for securing the backguard to the worktop. Position the back part of the backguard and secure it to the worktop tightening 4 screws from the bottom. Disassemble the backguard and position the front part on the worktop. A
Résumé du contenu de la page N° 10
INSTALLING THE ANTI‐TIP STABILlTY INSTALLATION REQUIREMENTS DEVICE The anti‐tip bracket shipped with the range must be properly secured to the rear wall as shown in ELECTRICAL the pircture below. A properly‐grounded horizontally‐ mounted The height of the bracket from the floor must be electrical receptacle should be installed no higher determined after the range legs have been than 3" (7.6 cm) above the floor, no less than 2” adjusted to the desired height and after the (5 cm)
Résumé du contenu de la page N° 11
EXHAUST HOOD INSTALLATION This range will best perform when used with PRO INSTALLATION ADJACENT TO KITCHEN line Bertazzoni exhaust hoods. These hoods have CABINETS been designed to work in conjunction with the This range may be installed directly adjacent to Bertazzoni range and have the same finish for a existing countertop high cabinets (36" or 91.5 cm perfect look. from the floor). For maximum performance, the height of the For the best look, the worktop should be level
Résumé du contenu de la page N° 12
ELECTRICAL CONNECTION WARNING! This unit is manufactured for a polarized, ELECTRICAL SHOCK HAZARD grounded 120 volt/60 Hz, 16 amp system. Disconnect electrical power at the circuit Electric power consumption is about 150 W. breaker box or fuse box before installing the appliance. The minimum of 102 VAC is required for proper operation of gas ignition systems. Provide appropriate ground for the appliance. The circuit must be grounded and properly Use copper conductor
Résumé du contenu de la page N° 13
MANUAL SHUT‐OFF VALVE GAS CONNECTION THIS VALVE IS NOT SHIPPED WITH THE APPLIANC All gas connections must comply with national AND MUST BE SUPPLIED BY THE INSTALLER. and local codes. The gas supply line (service) The manual shut‐off valve must be installed in must be the same size or greater than the inlet the gas service line between the gas hook‐up on line of the appliance. This range uses a 1/2" NPT the wall and the appliance inlet, in a position inlet (see drawing below for detai
Résumé du contenu de la page N° 14
PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. The pressure regulator shipped with the appliance has has two female threads ½” NPT. The regulator shall be installed properly in order to be accessible when the appliance is installed in its final position. Manifold pressure should be checked with a manometer and comply w
Résumé du contenu de la page N° 15
STEP 1: PRESSURE REGULATOR GAS CONVERSION The pressure regulator supplied with the appliance is a convertible type pressure regulator WARNING! for use with LP gas at a nominal outlet pressure Before carrying out this operation, disconnect of 11” w.c. or Natural Gas at a nominal outlet the appliance from gas and electricity. pressure of 4” w.c. and it is pre‐arranged from the factory to operate with one of these Gas conversion shall be conducted by a factory‐ gas/pressure as indica
Résumé du contenu de la page N° 16
STEP 3: MAIN OVEN BURNER STEP 2: SURFACE BURNERS To replace the nozzles of the main oven burner, To replace the nozzles of the surface burners, lift start by removing the bottom panel of the oven. up the burners and unscrew the nozzles shipped with the range using a 7 mm {sochet wrench). Replace nozzles using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body.
Résumé du contenu de la page N° 17
STEP 4: BROILER BURNER Loosen the screw and pull out the burner from its support. ATTENTION: pay extra attention to avoid damage to the igniter and thermocouple. Using a 7 mm [name of the tool] unscrew the nozzle. Replace the nozzle using the conversion set supplied with the range or by a Bertazzoni authorized parts warehouse. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 20 for matching nozzles to burners. U
Résumé du contenu de la page N° 18
STEP 5: VISUAL CHECKS Before reinstalling the bottom panel, the following visual check must be performed to ensure that the conversion has been carried out properly and without damage to other components of the range. A) CONNECTION OF THERMOCOUPLES TO THERMOSTAT The thermocouples for both broiler and main oven burner are connected to the same magnet. After performing all these visual checks, reinstall Tight gently the two connections alternating the bottom panel of the oven com
Résumé du contenu de la page N° 19
STEP 6: MINIMUM FLAME ADJUSTMENT OVEN BURNER 1. Set the oven temperature control knob to the MAXIMUM setting. WARNING! 2. Close the oven door and operate the oven for These adjustments should be made only for use at least 10 minutes. of the appliance with natural gas. For use with 3. Set the knob to the MINIMUM setting liquid propane gas, the choke screw must be (corresponding to 270°F/132°C). fully turned in a clockwise direction. 4. Remove the knob. 5. With a slotted sc
Résumé du contenu de la page N° 20
Models PRO30 4 GAS X [M7S0GNU7X (2,5)A] Models PRO30 4 GAS AR [M7S0GNU7S (2,5)A] Models PRO30 4 GAS BI [M7S0GNU7W (2,5)A] Models PRO30 4 GAS NE M7S0GNU7N (2,5)A] Models PRO30 4 GAS RO [M7S0GNU7R (2,5)A] Models PRO30 4 GAS VI [M7S0GNU7L (2,5)A] Burner Position Injector Gas Pressure Max Rate Min Rate By-pass diam. [mm.] Type [i.w.c.] [BTU/h] [W] [BTU/h] [W] diam. [mm] Auxiliary Rear L NG 4” 900 264 Regulated 0,92 3750 1098 LP (Propane) 11” 900 264 0,29
