Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Welcome & Congratulations Congratulations on your purchase of a new range! At Electrolux Home Products, we are very proud of our product and are completely committed to providing you Questions? with the best service possible. Your satisfaction is our number one priority. We know you’ll enjoy your new range and Thank You for choosing our product. 1-800-944-9044 We hope you consider us for future purchases. (United States) PLEASE CAREFULLY READ AND SAVE THESE INSTRUCTIONS 1-866-729-5199 This Use &
Résumé du contenu de la page N° 3
Important Safety Instructions Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please remember these symbols and follow all instructions given. This symbol will help alert you to situations that may cause serious bodily harm, death or property damage. This symbol will help alert you to situations that may cause bodily injury or property damage. • Remove all tape and packaging bef
Résumé du contenu de la page N° 4
Important Safety Instructions Protective Liners—Do not use aluminum foil to line the oven IMPORTANT INSTRUCTIONS FOR USING bottom. Only use aluminum foil as recommended in this YOUR COOKTOP manual. Improper installation of these liners may result in risk Know which knob controls each surface heating unit. Place of electric shock, or fire. a pan of food on the unit before turning it on, and turn the unit off before removing the pan. SELF CLEANING OVENS Use Proper Pan Size—This appliance is
Résumé du contenu de la page N° 5
Résumé du contenu de la page N° 6
Résumé du contenu de la page N° 7
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
Résumé du contenu de la page N° 10
Résumé du contenu de la page N° 11
Setting Surface Controls To Operate the Bridge Surface Element: 1. Place correctly sized cookware on the Bridge surface element. 2. Push in and turn the control knob counterclockwise (See Figs. 1 and 2) to heat the portion of the Bridge element for normal shaped cookware or clockwise (See Figs. 3 and 4) for larger or rectangular shaped cookware. 3. Use the ESEC digital display window for the desired setting. Turn (do not push) the knob to adjust the setting if needed. Start most cooking operatio
Résumé du contenu de la page N° 12
Résumé du contenu de la page N° 13
Before Setting Oven Controls Arranging the Oven Racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when the oven is hot. Removing and Replacing Oven Arranging Oven Racks Oven Vent Location Racks To bake on a single rack, place the The oven vent is located below the To remove, pull the rack forward until rack in position 3 or 4. To bake on 2 backguard. When the oven is on, hot it stops. Lift up front of rack and slide racks, place the racks
Résumé du contenu de la page N° 14
Setting Warming Drawer Controls (some models) Arranging Warming Drawer Rack Positions The rack can be used in 2 ways: Always use pot holders In the upright position to allow low profile food items to be placed both or oven mitts when removing food from under and on top of the rack (for example, rolls or biscuits on top of the the Warming Drawer as cookware and rack and a casserole dish underneath). plates will be hot and you can be In the downward position to allow you to place light weight
Résumé du contenu de la page N° 15
Control Pad Features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Manual. 0 THRU 9 CONVECTION CONVECTION OVEN LIGHT— OVEN LOCKOUT— CLOCK— BAKE— Used to ROAST— Used to Used to turn the Used to disable all Used to set NUMBER PADS select the Convection select the Convection oven light
Résumé du contenu de la page N° 16
Setting Oven Controls Setting the Clock The CLOCK pad is used to set the clock. The clock may be set for 12 or 24 hour time of day operation. The clock has been preset at the factory for the 12 hour operation. When the range is first plugged in, or when the power supply to the range has been interrupted, the timer in the display will flash with "PF" (power Figure 1 failure, See Fig. 1). INSTRUCTIONS PRESS DISPLAY To set the clock (example below for 1:30): 1. Press . "CLO" will appear in the
Résumé du contenu de la page N° 17
Résumé du contenu de la page N° 18
Résumé du contenu de la page N° 19
Résumé du contenu de la page N° 20
