Résumé du contenu de la page N° 1
Cer a mic glass induction hob
Installation and Operating
Instructions
EHD6671P
822 924 857-B-280405-03
g
Résumé du contenu de la page N° 2
Dear Customer, Please read these user instructions carefully and keep them to refer to later. Please pass the user instructions on to any future owner of the appliance. The following symbols are used in the text: 1 Safety instructions Warning! Notes that concern your personal safety. Important! Notes that show how to avoid damage to the appliance. 3 Useful tips and hints 2 Environmental information 2
Résumé du contenu de la page N° 3
Contents Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Description of the Appliance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Cooking surface layout . . . . . .
Résumé du contenu de la page N° 4
Operating Instructions 1 Safety instructions There is the risk of burns from the appliance if used 3 Please comply with these instructions. If you carelessly. do not, any damage resulting is not covered Cables from electrical appliances must not touch by the warranty. the hot surface of the appliance or hot cookware. Overheated fat and oil can ignite quickly. When 5 This appliance conforms with the following EU cooking with fat or oil (e.g. frying chips) do not Directives: leave the applia
Résumé du contenu de la page N° 5
Description of the Appliance Cooking surface layout Single cooking zone Double ring cooking zone 1200W 700/1700W Induction cooking zone 2300W Control panel Induction cooking zone 1400W with power function 3200W with power function 1800W Control panel layout Heat setting selection Cooking zone indicators Timer function Power function Outside ring Timer display On/Off Double ring pilot light On/Off with power indicator Display Timer Lock 5
Résumé du contenu de la page N° 6
Touch Control sensor fields The appliance is operated using Touch Control sen- sor fields. Functions are controlled by touching sen- sor fields and confirmed by displays and acoustic signals. Touch the sensor fields from above, without covering other sensor fields. Sensor field Function On / Off Switches appliance on and off Increase settings Increasing heat setting/time Decrease settings Decreasing heat setting/time Timer Timer selection Lock Locking/unlocking the control panel Power Switching
Résumé du contenu de la page N° 7
Operating the appliance 3 Use the induction cooking zones with suitable cookware. Switching the appliance on and off Control panel Display Pilot light Switch on Touch for 2 seconds ¾ / h lights up Switch off Touch for 1 second h / none goes out 3 After switching on, within approx. 10 seconds a heat setting or a function must be set, other- wise the appliance automatically switches it- self off. Selecting the heat setting Control panel Display Increase Touch u to Ç / p Decrease Touch Ç to ¾
Résumé du contenu de la page N° 8
Using the automatic warm-up function All cooking zones are equipped with an automatic warm-up function. The automatic warm-up function sets the cooking zone to the highest setting for a certain period of time and then automatically switch- es back to the cooking setting that was originally set. Step Control panel Display 1. Setting the level Ç / pÇ / p 2. Place to one side for a moment Ç / p 3. touch a 4. touch in order to set the desired cooking setting Æ until ¿ / u after 3 seconds a 3 I
Résumé du contenu de la page N° 9
Locking/unlocking the control panel The control panel, with the exception of the “On/Off” sensor field, can be locked at any time in order to prevent the settings being changed e.g. by wiping over the panel with a cloth. Control panel Display Switch on Touch l (for 5 seconds) Switch off Touch previously set heat setting 3 When you switch the appliance off, the locking function is automatically switched off. Using the child safety device The child safety device prevents unintentional use of the
Résumé du contenu de la page N° 10
Switching the power function on and off The power function makes more power available to the induction cooking zones, e.g. to bring a large quantity of water to the boil quickly. The power function is activated for 10 minutes. After that the induction cooking zone automatically switches back to heat setting 9. Control panel Display Switch on Touch p Switch off Touch Ç Touch Ç Power Management The cooking zones have a maximum power available to them. If this power range is exceeded by switc
Résumé du contenu de la page N° 11
Using the timer All cooking zones can use each use one of the two timer functions at the same time. Function Condition Outcome after the time has elapsed Automatic cut-out a heat setting is set acoustic signal 00 flashes Cooking zone switches off Countdown timer cooking zones not in use acoustic signal 00 flashes 3 If a cooking zone is switched off, the timer function set is also switched off. 3 If a heat setting is set on this cooking zone in addition to a countdown timer, the cooking zone i
Résumé du contenu de la page N° 12
Setting the time Step Control panel field Display 1. Select cooking zone Pilot light of the cooking zone selected flashes 2. Touch or for the cooking 00 to 99 minutes zone selected After a few seconds the pilot light flashes more slowly. The time is set. The time counts down. Switching off the timer function Step Control panel field Display 1. Select cooking zone Pilot light of the cooking zone selected flashes faster The time remaining is displayed 2. Touch for the cooking zone The t
Résumé du contenu de la page N° 13
Safety cut-out Cooking surface If after switching on the cooking surface, a heat setting is not set for a cooking zone within approx. 10 seconds, the cooking surface automatically switches itself off. If one or more sensor fields are covered for longer than approx. 10 seconds, e.g. by a pan placed upon it, a signal sounds and the cooking surface switches off automatically. If all cooking zones are switched off, the cooking surface automatically switches itself off after ap- prox. 10 second
Résumé du contenu de la page N° 14
Tips on cooking and frying 3 Information about acrylamides According to the latest scientific research, in- tensive browning of food, especially in prod- ucts containing starch, may present a health risk due to acrylamide. Therefore we recom- mend cooking at low temperatures and not browning foods too much. Cookware You can recognise good cookware from the bot- toms of the pans. The bottom should be as thick and flat as possible. Cookware made of enamelled steel or with alumin- ium or coppe
Résumé du contenu de la page N° 15
Tips on energy saving 2 Place cookware on the cooking zone before it is switched on. 2 If possible, always place a lid on the cook- ware. Examples of cooking applications The information given in the following table is for guidance only. Heat Cooking suitable for Cook time Tips/Hints setting process 0Off position Keeping V Keeping cooked foods warm as required Cover food warm Hollandaise sauce, Melting 5-25 mins. Stir occasionally melting butter, chocolate, gelatine 1-2 Solidifying Fluffy omel
Résumé du contenu de la page N° 16
Cleaning and care 1 Take care! Risk of burns from residual heat. 1 Important Sharp objects and abrasive clean- ing materials will damage the appliance. Clean with water and washing up liquid. 1 Important Residues from cleaning agents will damage the appliance. Remove residues with water and washing up liquid. Cleaning the appliance after each use 1.Wipe the appliance with a damp cloth and a little washing up liquid. 2.Rub the appliance dry using a clean cloth. Removing deposits 1.Place the scrap
Résumé du contenu de la page N° 17
What to do if… Problem Possible cause Remedy The cooking zones will not switch More than 10 seconds have passed Switch the appliance on again. on or are not functioning since the appliance was switched on The lock is switched on l Switch off the lock (See the section “Locking/unlocking the control panel”) The child safety device is switched Deactivate the child safety device on l (See the section “Child safety de- vice”) Several sensor fields were touched Only touch one sensor field at the s
Résumé du contenu de la page N° 18
If you are unable to remedy the problem by fol- lowing the above suggestions, please contact your local Service Force Centre. 1 Warning! Repairs to the appliance are only to be carried out by qualified service engineers. Considerable danger to the user may result from improper repairs. 3 If the appliance has been wrongly operated, the visit from the service technician or dealer may not take place free of charge, even during the warranty period. Disposal 2 Packaging material The packaging materi
Résumé du contenu de la page N° 19
Installation Instructions Safety instructions The laws, ordinances, directives and standards in force in the country of use are to be followed (safety regulations, proper recycling in accordance with the regulations, etc.) Installation may only be carried out by a qualified electrician. The minimum distances to other appliances and units are to be observed. A protective floor must be installed under the ap- pliance. The cut surfaces of the worktop are to be protected against moisture using a sui
Résumé du contenu de la page N° 20
Electrical Connection Diagram For UK only: 230V...240V~ Sticking on the seal Clean the worktop in the area of the cut-out sec- tion. Stick the one-sided self-adhesive sealing tape supplied all the way round the lower edge of the cooking surface along the outer edge of the glass ceramic panel. Do not stretch it. The cut ends should lie in the middle of one side. When you have cut it to length (add a few mm), press the two ends flush up against one another. 20
