Résumé du contenu de la page N° 1
LIMITED ONE YEAR WARRANTY
This warranty shall be in effect for a period of one year from the date of the first
consumer purchase. This warranty is valid during the warranty period providing that proof
of date of purchase from an authorized dealer is presented whenever warranty service is
required.
To receive service for this product return it to the Metrik dealer from whom it was
purchased and such dealer will arrange for service. If shipment of the product is required,
it should
Résumé du contenu de la page N° 2
DEAR CUSTOMER: Thank you for your purchase of our audio-visual product. Selecting fine audio equipment such as the unit you have just purchased is only the start of your musical enjoyment. Now it is time to consider how you can maximize the fun and excitement your equipment offers. We hope you get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying noise or distortion, and, more important, without affecting your s
Résumé du contenu de la page N° 3
LOCATION AND FUNCTION OF CONTROLS SPECIFICATION GENERAL Supply Voltage DC 13.8V. Negative Ground Current Consumption Max.10A MAX Power Output 25Watts X 4 Number of channels 2 STEREO channels. Unit Dimensions 178[W] X 164[D] X 50[H] mm. FM SECTION Frequency range 87.5MHz -107.9MHz Effective sensitivity 3uV. I.F Frequency 10.7
Résumé du contenu de la page N° 4
5) FADER CONTROL A. Press the SEL button to select the fader mode until FAD appears on the display. TROUBLE SHOOTING B. Rotate the VOL knob to increase or decrease the sound level of front or rear speaker. Before using the check list please make all the connections first. (2) When pressed longer 2 seconds, it is activated as cyclical mode of following functions for user s selection. If you still have questions after going through the checklist, please consult
Résumé du contenu de la page N° 5
5. AUTO-STORAGE/PRESET MEMORY SCAN BUTTON PRECAUTION OF DISC PLAY: 1) In radio mode, press it to perform all stations memory for 5 seconds each time, while memory digital and frequency will flash on LCD. If the button is pressed for more than 2 seconds, it will seek station on current band, then write to the preset memories. When the auto-storage Cleaning the CD: operation is completed, it will automatically perform for 5 seconds each time. After finishing 1 Before playing
Résumé du contenu de la page N° 6
PRECAUTIONS AND MAINTENANCE 9. POWER BUTTON 1. If the car interior is extremely hot, as after being parked in the sun, do Press any button except the EJECT and RELEASE button to turn on the unit. not use the player until the car has been driven for a while to cool off It also can turn on the unit to insert disc, MMC/SD card or USB bar into their compartment or socket. Press PWR button hold for more than 0.5 seconds to turn off the unit. the interior. 2. The protectiv
Résumé du contenu de la page N° 7
13. MODE BUTTON Press it to select RADIO, DISC, CARD(after inserting MMC/SD card), USB(after inserting USB bar) and auxiliary input playing mode. 14&15. MMC/SD COMPARTMENT and USB SOCKET and THEIR OPERATION When needing to do MMC/SD or USB playing, insert the MMC/SD card or USB bar into MMC/SD compartment or USB socket. Then the playing mode will be changed into MMC/SD or USB mode and display CARD or USB on LCD(When MMC/SD card and USB bar are both inserted
Résumé du contenu de la page N° 8
MAINTENANCE OF REMOTE CONTROLLER OPERATION OF REMOTE CONTROL: An insulation tag was installed in your remote by the manufacturer to prevent the NOTE: battery from draining. Removing the tag from the remote before using. Before you use the remote control, be sure to turn on the unit by pressing the POWER button on the front panel. 1. Power On/Off. 2. Mute Button BATTERY INFORMATION: Lithium Battery: CR2025 3V 3. Loudness Button Battery Life: Approximately 6 months. 4. Level/M
