Résumé du contenu de la page N° 1
IN122, IN124, IN126
in122, in124, in126
PD639-A000-02
Regulatory models: IN122, IN124, IN126
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Declaration of Conformity FCC Warning Manufacturer: InFocus Corporation, 13190 SW 68th Parkway, Suite 200, Portland, Oregon This device complies with part 15 of the FCC Rules. Operation is subject to the following 97223-8368 USA two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. We declare under our sole responsibility that this projector conforms to the follow
Résumé du contenu de la page N° 4
Table of Contents Introduction 4 Positioning the projector 6 Connecting a computer source 7 VGA connection 7 HDMI connection 7 Connecting power 7 Optional computer connections 7 Displaying an image 8 Adjusting the image 9 Connecting a video device 10 Video device connections 10 Composite video connection 10 VGA connection 10 Component video connection 10 S-video connection 10 Shutting down the projector 11 Troubleshooting your setup 11 Using the remote control 19 Using the audio 20 Using the key
Résumé du contenu de la page N° 5
3’ / 1 m 8’/2.4m • Refer all service to qualified service personnel. Servicing your own projector Important Operating Considerations for Safety can be dangerous to you and will void the warranty. • Refer to this guide for proper startup and shutdown procedures. • Only use replacement parts specified by InFocus. Unauthorized substitutions • Follow all warnings and cautions in this manual and on the projector. may result in fire, electrical shock, or injury, and may void the warranty • Place th
Résumé du contenu de la page N° 6
Introduction Your new digital projector is simple to connect, easy to use, and straightforward to maintain. It is a versatile projector that is flexible enough for business presentations and home video zoom viewing too. IN122 has native SVGA 800 x 600 resolution, IN124 has native XGA 1024 x 768 resolution, and IN126 has native WXGA 1280 x 800 resolution. It is compatible with a wide focus variety of computers and video devices. keypad Product specifications To read the latest specificatio
Résumé du contenu de la page N° 7
Connector panel The projector provides both computer and video connection options, including: • VGA computer • Composite video HDMI •HDMI RS 232 S-video •S-video audio in/out computer • USB mini B connector for firmware upgrades and presentation slide control. USB mini B • Monitor out, for VGA pass through to an external monitor. • Audio input for video and computer. • Audio output to external speakers. • RS-232 serial control. Command control codes are on our support website at www.infocus.com
Résumé du contenu de la page N° 8
Positioning the projector Table 1: IN122 (SVGA)/IN124 (XGA) Screen size To determine where to position the projector, consider the size and shape of your Distance to screen screen, the location of your power outlets, and the distance between the Size of the projector and the rest of your equipment. Here are some general guidelines: Diagonal Screen Projected Image Minimum Maximum • Position the projector on a flat surface at a right angle to the screen. IN122 Size (inches/m) Width distanc
Résumé du contenu de la page N° 9
Connecting a computer source connect VGA cable VGA connection Connect one end of the provided computer cable to the Computer in 1/Computer in 2 connector on the projector and the other to the VGA connector on your computer. If you are using a desktop computer, you will need to disconnect the monitor cable from the computer’s video port first. HDMI connection connect HDMI HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI provides an interface between sources, such as s
Résumé du contenu de la page N° 10
Displaying an image press Power button Press the Power button. The Power LED lights blue, and the fans start to run. When the lamp comes on, the start up screen displays. It can take up to a minute for the image to achieve full brightness. Note: When the feature, AC Power On, is enabled, the projector automatically turns on when power is connected. This allows control of ceiling mounted projectors with a wall power switch. No start up screen? Get help on page 12. turn on computer or Turn on
Résumé du contenu de la page N° 11
Adjusting the image adjust height If necessary, adjust the height of the projector by rotating the elevator foot to extend the foot. If necessary, rotate the leveling foot located at the rear of the projector. elevator foot Avoid placing your hands near the hot exhaust vent at the front of the projector. adjust distance Position the projector the desired distance from the screen at a 90 degree angle to the screen. See page 6 for a table listing screen sizes and distances. Adjust the zoom or f
Résumé du contenu de la page N° 12
Component video connection Connecting a video device If your HD video device has component connectors, an optional Component to VGA You can connect video devices such as VCRs, DVD players, camcorders, digital cameras, adapter can be used. Plug the component cable into the video device. Plug the other end of video game consoles, HDTV receivers, and TV tuners to the projector. You can connect the the component cable into the adapter and plug the adapter into the Computer connector. audio direc
Résumé du contenu de la page N° 13
The Status Indicator Panel on top of the projector indicates the state of the projector and Shutting down the projector can help you troubleshoot. Auto Off Time POWER The projector also has an Auto Off Time feature that automatically turns the projector off TEMP/LAMP after no active sources are detected and no user interaction with the projector is performed for 30 minutes. By default, this feature is off. You can change the length of time, see page 29. Table 3: Status indicator light behavio
Résumé du contenu de la page N° 14
A A Problem Solution Result No start up screen Plug power cord into the projector Correct image press power button Only start up screen appears Computer image projected Press the Source button activate laptop’s external port Restart laptop 12 Startup Screen Startup Screen A
Résumé du contenu de la page N° 15
A A A A Problem Solution Result Press the Auto Image button on remote Computer image projected No computer image, just the words “Signal out of Adjust computer refresh rate (Windows 7: Control range” Panel > Display > Screen Resolution > Advanced Settings > Adapter tab). Varies per operating system. You may also need to set a different resolution on your computer, as shown in the following problem, “image fuzzy or cropped” Only my laptop’s background appears, not the Change the Multiple D
Résumé du contenu de la page N° 16
Problem Solution Result Change the computer's "Resolution" setting to match Image fuzzy or cropped Image clear and not cropped the projector's resolution (Windows 7: Control Panel > Display > Screen Resolution). Varies per operating system. A A A Move projector, adjust height Correct image Image not centered on screen MDL: IN122 ( PC ) FW: 0.13 Force Wide Off Phase 50 Adjust horizontal or Prevent PC Screen Saver Off Sync Threshold 50 Tracking 50 vertical position in Horz Position 50 Vert
Résumé du contenu de la page N° 17
Problem Solution Result Image not square Adjust Keystone on keypad Square image Adjust Sharpness in the Basic Menu Image not sharp Correct image MDL: IN122 ( Basic Menu ) FW: 0.13 Aspect Ratio ◄ Auto ► Auto Image Execute Brightness 50 Contrast 50 Keystone 50 Presets Presentation Sharpness 50 Volume 50 Ceiling Mount Off Advanced Menu Correct image Image does not fit 4:3 or 16:9 screen Change aspect ratio to 4:3 or 16:9 in Basic Menu > Aspect Ratio menu MDL: IN122 ( Basic Menu ) FW: 0.13 Aspect R
Résumé du contenu de la page N° 18
Problem Solution Result Turn off Ceiling Mount in Basic menu Correct image Image upside down MDL: IN122 ( Basic Menu ) FW: 0.13 Aspect Ratio ◄ Auto ► Auto Image Execute Brightness 50 Contrast 50 A Keystone 50 Presets Presentation Sharpness 50 Volume 50 Ceiling Mount Off Advanced Menu Turn off Rear Project in Advanced Menu > Setup > Correct image Image reversed left to right Image Setup... menu MDL: IN122 ( Image Setup ) FW: 0.13 Digital Zoom 50 Horz Shift 50 Vert Shift 50 Magnify Level 50
Résumé du contenu de la page N° 19
A B Problem Solution Result Turn off the internal LCD display on your laptop The video embedded in my PowerPoint presentation Embedded video plays correctly does not play on the screen Make sure vents aren’t blocked, turn off the projector Lamp turns on Lamp won’t turn on, the projector is overheating and allow it to cool for one minute POWER TEMP/LAMP Overheating indicator 17 B B Startup Screen A A
Résumé du contenu de la page N° 20
Problem Solution Result Lamp turns on “Replace lamp” message appears at startup, lamp Lamp must be replaced (see page 31) won’t turn on lamp door replace lamp Still need assistance? If you need assistance, visit our website at www.infocus.com/support or call us. See the Warranty/Safety booklet for support contact information. This product is backed by a limited warranty. An extended warranty plan may be purchased from your dealer. When sending the projector in for repair, we recommend shippin
