Résumé du contenu de la page N° 1
BARCO PROJECTION SYSTEMS
SLM R6
Executive
R9002790
OWNER'S MANUAL
Date: 06.09.2001 Rev.: 00 Art. No.: R5976336
Résumé du contenu de la page N° 2
Due to constant research, the information in this manual is subject to change without notice. Produced by BARCO NV, September 2001. All rights reserved. Trademarks are the rights of their respective owners. BARCO n.v./Projection Systems Noordlaan 5 B-8520 Kuurne Belgium Tel : +32/56/368211 Fax : +32/56/351651 E-mail : sales.bps@barco.com Visite Barco at the web : http://www.barco.com Printed in Belgium
Résumé du contenu de la page N° 3
TABLE OF CONTENTS i TABLE OF CONTENTS ......................................................................................................I-1 SAFETY INSTRUCTION RELATED TO SLM PROJECTORS ......................................... 1-1 Warnings .................................................................................................................................................... 1-1 To prevent personel injury.............................................................................
Résumé du contenu de la page N° 4
Lamp Light Output Indication ............................................................................................................................................................ 4-2 Switching to Stand-by. ..................................................................................................................................................................... 4-2 Switching Off .......................................................................................................
Résumé du contenu de la page N° 5
RANDOM ACCESS ADJUSTMENT MODE ...................................................................... 7-1 Random Access Mode ................................................................................................................................ 7-1 Starting up ......................................................................................................................................................................................... 7-1 Overview Flowchart ......................
Résumé du contenu de la page N° 6
Shift ........................................................................................................................................................... 7-14 What can be done ? ....................................................................................................................................................................... 7-14 To start up the shift action : ..............................................................................................................
Résumé du contenu de la page N° 7
How to change the password ?...................................................................................................................................................... 9-4 Access Control List.......................................................................................................................................................................... 9-4 Change Language ...........................................................................................................
Résumé du contenu de la page N° 8
i-6 R5976336 BARCOSLM R6 Executive 06092001
Résumé du contenu de la page N° 9
Safety SAFETY INSTRUCTION RELATED TO SLM 1 PROJECTORS Warnings To prevent personel injury The customer should never attempt to disassemble the lamp casing or to dispose of the lamp casing other than by returning it to BARCO. To prevent injuries and physical damage, always read this manual and all labels on the system before connecting to the wall outlet, or adjusting the projector. To prevent injuries, take note of the weight of the projector. Minimum 2 persons are needed to carry the projecto
Résumé du contenu de la page N° 10
Safety Note Definitions Definition Qualified service technicians or Qualified technicians : Persons having appropiate technical training and experience necessary to be aware of hazards to which they are exposed in performing a task and of measures to minimize the danger to themselves or other persons. Extra safety manual Read also safety instructions in seperate manual (R5976125). 1-2 R5976336 BARCOSLM R6 Executive 06092001
Résumé du contenu de la page N° 11
Packaging and Dimensions PACKAGING AND DIMENSIONS 2 Projector Packaging Way of Packaging The projector can be packed in two different ways : - in a flightcase or - in carton. Flightcase The projector is packed in a flightcase. Carton To provide protection during transportation, the projector is surrounded with foam, placed on a wooden palette and enclosed within a sturdy fibreboard carton. The package is then secured with banding and fastening clips. To unpack : First release the two fastening
Résumé du contenu de la page N° 12
Packaging and Dimensions Lens Packaging Way of Packaging Lenses are supplied as an individual item. They are packed in a carton. Projector Case Dimensions )5 21 7 9 (:, The dimensions are given in mm 5, UHFHLY H U 25.4 mm = 1" 7 $,2 85 O D Q L P R Q :: (( ,, 99 UU HLYHHLYH FF UHHU ,, 55 WW HH EOEO WW $GM$GM HH DD XVXV II HH ,, 11 7 2 % 7 : 0 2 G N Z RS QL0D D \ O S V V , K FWL U
Résumé du contenu de la page N° 13
Installation Guidelines INSTALLATION GUIDELINES 3 Installation Guidelines Ambient Temperature Conditions Careful consideration of things such as image size, ambient light level, projector placement and type of screen to use are critical to the optimum use of the projection system. Operation temperature : Max. ambient temperature : 40 °C (104°F) Min. ambient temperature : 0 °C (32°F). The projector will not operate if ambient air temperature falls outside this range (0°C- 40°C) (32°F-104°F). Stor
Résumé du contenu de la page N° 14
Installation Guidelines Regardless of the type of screen used, it is important that your screen is of sufficient height to display the images at the aspect ratio intended to be used. If you have insufficient height, you will have to reduce the overall image size in order to display the full image on your screen. For more information about screens, contact your local screen supplier. What image size? How big should the image be? The projector is designed for projecting an image size : min 1.00m
Résumé du contenu de la page N° 15
Installation Guidelines J Q D 7 : ( ’ , 6 Q H H U R W M R V Q Q R L W F S [ D D F L W S 2 $ % $ % + U \ Q HH U : (, 9 1 2 O ) : (, 9 . & Image 2 R P QL OL H & : ( , 9 J Q H & % $ V Q RL W O D FL W S 2 Q HHU U 3 $ % + 6 U F 6 : ( , 9 * ( & : ( J Q H & Image 3 R5976336 BARCOSLM R6 Executive 06092001 3-3 6: 6+ LOL %$& . 9, ,/ ,1 HHQ 6: &’ RMHF WRU 6F D[LV S URMHF OHQ 6+ 3’ &’ LOL 6, ’( J XQW HG %$ RRU 6+ 6: )5 7 6F 6: LW DY LQ W R I J 3R &’ 6
Résumé du contenu de la page N° 16
Installation Guidelines Safety Area around the Projector Make sure the projector is located so that the air inlets and outlets for the cooling system are not obstructed. Leave a safety area of about 1 meter on the left and the right side of the projector. 7 8 2 5 , $ \ W L Y D U J I R W Q L R 3 Safety area for blow out hot air Image 6 Re-adjusting the lamp position in the lamp casing With higher run times, the light output of the lamp will decrease, which results in a lower light output on
Résumé du contenu de la page N° 17
Installation Guidelines Lenses Which Lens has to be selected. 1 Determine the required screen width. 2 Determine the approximate position of the projector in the projection room with regard to the screen and measure the projector-screen distance (PD). 3 Use the lens formulas to find the best corresponding PD with regard to the measured projector-screen distance for the required screen width. The desired lens is determined (the order number is given in the tabel). Available lenses TLD lenses : Na
Résumé du contenu de la page N° 18
Installation Guidelines Installing the Projection Lens The projector is supplied without any lens. Installation of TLD lenses : Remove the foam rubber in the opening of the lens holder. 1 Take the lens assembly out of its packing material and remove the lens caps on both sides. 2. Move the handle (A) of the lens anchor system to the right (image 8). 3. Push the lens, motors at the top, in the lens block gap horizontally, lining up the motor connector on the lens with the connector on the lens bl
Résumé du contenu de la page N° 19
Installation Guidelines Cleaning the lens To minimize the possibility of damaging the optical coating or scratching exposed lens surface, we have developed recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from the lens by blowing it off with clean, dry deionized air. DO NOT use any liquid to clean the lenses. TM A Toraysee cloth is included with the lens kit. Proceed as follows : TM 1. Always wipe lenses with a CLEAN Toraysee cloth. 2. Always wipe lense
Résumé du contenu de la page N° 20
Connections CONNECTIONS 4 Power Connection to Projector AC Power (mains) cord connection Use the supplied power cord to connect the projector to the wall outlet. Plug the female power connector into the black male connector on the side of the projector. The power input is 230 VAC. Needed power connection : 7 A. 230V/7A 50/60Hz Fuses Warning For continued protection against fire hazard : - refer replacement to qualified service personnel - ask to replace with the same type of fuse. Switching ON
