Résumé du contenu de la page N° 1
TDP-EX20
DATA PROJECTOR
OWNER’S MANUAL
Others Maintenance Operations Preparations Before Using
Résumé du contenu de la page N° 2
Before Using SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is - Reorient or relocate the receiving antenna. intended to alert the user to the presence of uninsulated "dangerous voltage" - Increase the separation between the equipment and receiver. within the product's enclosure that may be of sufficient magnitude to constitute a - Connect the equipment into an outlet on a circuit different from that to which the receiver risk of electric shock to
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND 5. Heat 8. Be sure that you firmly INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE The product should be situated insert the plug into the wall MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE away from heat sources such as outlet. REFERENCE. radiators, heat registers, stoves, Incorrect or faulty connections or other products (including may result in fire or electric shock. This unit is fully transis
Résumé du contenu de la page N° 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) 11. Lightning storms 13. Do not place or keep the 16. Moving the projector 19. Damage Requiring Service For added protection for this projector within the reach When carrying the projector, be Unplug this product from the product during storm, or when it sure to use the carrying handle to wall outlet and refer servicing to of the children. is left unattended and unused for avoid any damage to the lens or qualified service personnel under It may fall d
Résumé du contenu de la page N° 5
IMPORTANT SAFETY INSTRUCTIONS (Continued) 20. If glass components, 23. Safety Check 27. When using a wireless including lens and lamp, Upon completion of any service LAN function: or repairs to this product, ask should break, contact your • Do not use near people the service technician to perform dealer for repair service. with heart pacemakers. safety checks to determine that This product incorporates glass the product is in proper operating • Do not use near electronic components, inc
Résumé du contenu de la page N° 6
POWER SUPPLY INFORMATION IMPORTANT PRECAUTIONS (Continued) If your line voltage is 220 to 240V, use one of the following types of cable/plug. Avoid Volatile Liquid Plug Plug Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or configuration Plug type Line voltage configuration Plug type Line voltage plastic products touching the unit for a long time. They will leave marks on the finish. Do not use a chemically saturated cloth. Australian 200 – 240V EURO 2
Résumé du contenu de la page N° 7
OTHER INFORMATION REMOTE CONTROL BATTERIES Copyrights Caution Showing or transmitting commercial imaging software or broadcast or cable-broad casting • Never throw batteries into a fire. programs with the purpose of other than the personal and private viewing, including Using the batteries improperly may cause them to explode or leak and lead to burn or modifying images using the freeze or resize functions, or displaying with the varying injury. If battery-leaking fluid contacts skin, wash the flu
Résumé du contenu de la page N° 8
CONTENTS Using the menus 2 .......................................................................................... 50 Before Using Setup using the Setting display (2) .............................................................. 50 SAFETY PRECAUTIONS ............................................................................... 2 Setting up the Network Projector/Network Utility ......................................... 51 IMPORTANT SAFETY INSTRUCTIONS .......................................
Résumé du contenu de la page N° 9
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If (1) (2) (3) (4) (5) (6) (7) any item is missing, please contact the store immediately where you purchased the product. (1) (4) (7) (2) (5) (8)(9) (10) (11) (12) (13) (14)(15) (16)(17)(14) (3) (6) (8) Back Front Name : Function (1) Remote control (5) RGB cable (3m) (See note) (1) Air exhaust : Expels air that has grown ho
Résumé du contenu de la page N° 10
Names of each part on the control panel and remote control Name : Main Function Control panel Remote Control (5) AUTO SET button : p.31 Performs auto-adjustment of input signals from computer. Remote control transmitter (6) ZOOM button : Adjusts the screen size. (11) (12) (13) Laser light source (7) INPUT button : Selects input. p.28 (12) (8) NETWORK button : p.50 Switches to network input mode. (4) (14) (7) (5) (9) RETURN button : Goes back one screen. (10) (3) (8) (1) (10) Selection button :
Résumé du contenu de la page N° 11
Approx. 5m Names of the terminals on the rear panel Preparing and using the remote control (1) (2) (3) (4) (5) (6) (7) Loading dry-cell batteries Operating the remote into the remote control control Point toward the projector’s infrared 1 Remove the battery cover. remote sensor, and press a button on the remote control. • Operating the projector from the front 2 Insert the dry-cell batteries. Be sure to align the plus and minus ends Approx. 15° of the batteries properly. (8)(9)(10) (11)
Résumé du contenu de la page N° 12
Operating a computer using the remote control Placement A computer can be operated using the projector’s remote control. This function is available on Placement Styles ® ® ® ® any computer with the Windows 98/98SE, Windows Me, Windows 2000, Windows XP, or As shown in the figures below, this device can be placed in 4 different styles. Windows Vista™ OS, that is equipped with a USB port which can support USB1.1 (The mouse The factory setting is “floor-mounted front projection.” Set the [Projecti
Résumé du contenu de la page N° 13
Connection Notes Before connection • The COMPUTER 1 IN terminal functions identically to the COMPUTER 2 IN terminal. • Read the owner’s manual of the device you are connecting to the projector. • The MONITOR OUT terminal outputs signals from the COMPUTER 1 IN terminal or • Some types of computer cannot be used or connected to this projector. the COMPUTER 2 IN terminal, or outputs Y/PB/PR signals as selected with the INPUT Check for an RGB output terminal, supported signal p.94 , etc. button.
Résumé du contenu de la page N° 14
Operations Turning the power on and off Notes Connecting the power cord • The start-up screen will disappear after a moment. You can dismiss the start-up screen Insert the power cord connector 1 before this by performing any operation. You can also configure the start-up screen not into the AC IN socket of the p.40 to appear via the Display setting menu . projector. • The first time you use the projector after purchase, after the start-up screen disappears, p.28 the start menu is displayed
Résumé du contenu de la page N° 15
Basic operations Notes Turn on the power. 1 p.43 • When [Auto input search] is set to [Off] in the Default setting 1 menu p.26 Turn on the power by following the instructions in “Turning the power on” . (factory setting is [On]), the Input select menu appears if you press the INPUT p.43 button . 2 Select the language and the lamp power (When using the • If no signal is being output from the connected equipment, pressing the INPUT first time). button does not change the input and “There is
Résumé du contenu de la page N° 16
Basic operations (Continued) Using handy features Remote Notes Using auto setting (Only for input from computer) control • Note that lamp characteristics may rarely cause the brightness to fluctuate slightly. This function automatically adjusts the projector settings such as • A lamp is consumable item. If used for extended periods, images will appear dark, and sampling phase, frequency, screen position, and clamp pulse for each the lamp could burn out. This is characteristic of a lamp, an
Résumé du contenu de la page N° 17
Using handy features (Continued) Zooming out the images Resizing image This projector is provided with the digital zoom (electric zoom: 100 - 62%). (Note that the The projected image can be resized (zoomed in/out). display, if digitally zoomed out, may suffer from some degradation.) Press the remote control’s RESIZE button. 1 Press the ZOOM – button. 1 Each time you press the RESIZE button, zoom ratio is up. You can keep Each time the ZOOM – button is pressed, the pressing. Remote Contro
Résumé du contenu de la page N° 18
Using handy features (Continued) Cutting off the picture and sound temporarily (Mute) Freezing the image (Freeze) When you want to project the images of another projector, overhead The image being projected can be frozen. This function is to be used to Remote Remote control projector, etc. temporarily, this projector’s images and sound can be pause a video during a presentation, etc. control turned off. Press the remote control’s FREEZE button. Press the remote control’s MUTE button. The
Résumé du contenu de la page N° 19
Using handy features (Continued) Using the menus 1 You can call up on-screen menus, and conduct a number of adjustments and settings using How to set password (from [Off] to [On]) p.18 the operation buttons on the control panel (main unit side) and remote control. Select [Password] in the Default setting 2 menu and press the or 1 button. Setup using the Setting display The menu shown below is for operation instructions purposes and might differ from the Select [Password setting] in the
Résumé du contenu de la page N° 20
Using the menus 1 (Continued) The image adjustment menu The position adjustment menu Use this menu to set or adjust image-related items. Items that can be set or adjusted Use this menu to set or adjust position-related items. Items that can be set or adjusted are marked with “Yes”, and those that cannot are marked with “No”. (When an item is are marked with “Yes”, and those that cannot are marked with “No”. (When an item is masked, it indicates that you cannot select for the current input.)
