Résumé du contenu de la page N° 1
SP-P410M
LED Pocket Projector
Owner’s Instructions
The color and the appearance may differ depending on the
product, and the specifications are subject to change
without prior notice to improve the performance.
Résumé du contenu de la page N° 2
Table Of Contents MAJOR SAFETY PRECAUTIONS Before You Start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 INSTALLATION AND CONNECTION Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Installi
Résumé du contenu de la page N° 3
1 Major Safety Precautions 1-1 Before You Start Icons used in this manual Icon NAME MEANING Caution Indicates cases where the function may not work or the setting may be canceled. Note Indicates a hint or tip to operate a function. Using this Manual • Make yourself fully aware of the safety precautions before using this product. • If a problem occurs, refer to the 'Troubleshooting' section. Copyright Notice The contents of this manual are subject to change without prior notice for performance im
Résumé du contenu de la page N° 4
Clean the projector using a soft dry cloth. • Avoid cleaning the product with an inflammable substance such as benzene or thinner or with a wet cloth. This may result in a problem with the product. • Avoid scratching the screen with your fingernails or a sharp object. This may result in scratches or damage to the product. • Avoid cleaning the product directly by spraying water onto the product. If water enters the product, it may result in fire, electric shock or a problem with the product
Résumé du contenu de la page N° 5
Do not touch. Must be grounded to prevent electric shock. Power Related The following images are for your reference and may differ depending on models and countries. Warning Plug the power plug in firmly. Avoid connecting multiple electric appli- ances to a single wall outlet. • Otherwise, it may result in fire. • Otherwise, it may result in fire due to overheating of the wall outlet. Avoid using a damaged power cord or plug Avoid bending or twisting the power cord or a loose power outle
Résumé du contenu de la page N° 6
Installation Related Warning Avoid installing the product in a location Avoid installing the product in a badly-ven- exposed to direct sunlight and installing tilated location such as inside a bookshelf the product near a heat source such as a or closet. fire or heater. • Otherwise, it may result in fire due to • This may shorten the product life cycle internal overheating. or cause fire. When installing the product in a cabinet or When installing the product on a console shelf, take care so
Résumé du contenu de la page N° 7
Usage Related Avoid inserting metal objects such as a Do not let children place objects such as chopsticks, coins or hairpins, or inflamma- toys or cookies on the product. ble objects into the product (the vents, • If a child tries to reach for any of these ports, etc). objects, the product may fall and cause • If water or an alien substance enters harm. the product, turn the power off, unplug the power cord and contact a service center. • Otherwise, it may result in a problem with the
Résumé du contenu de la page N° 8
When cleaning the product, disconnect the When a gas leak occurs, do not touch the power cord and clean the product with a product or the power plug and ventilate soft dry cloth. immediately. • Avoid using chemicals such as wax, • A spark may result in an explosion or benzene, alcohol, thinner, mosquito- fire. repellent, fragrance, lubrication or • During a thunder or lighting storm, do cleansing agent when cleaning the not touch the power cord or antenna product. cable This may result in
Résumé du contenu de la page N° 9
Do not place objects vulnerable to heat Be careful to keep your body away from near the projector. the projector lamp. The lamp is hot. (Children and those who have sensitive skin should be more careful.) Major Safety Precautions 1-3
Résumé du contenu de la page N° 10
2 Installation and Connection 2-1 Package Contents •Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the product at a later stage. Projector CONTENTS Quick Guide Product Warranty User Manual Power Cord Remote Control / 1 Battery Cleaning Cloth Adapter D-Sub Cable (CR 2025, Not available in all locations) 2-2-1 Installing the Projector Install the projector so that the beam from the projector is perpendicul
Résumé du contenu de la page N° 11
To view the picture when installing the projector behind the screen Install a semi-transparent screen. Select Menu > Setup > Install > Rear-Floor To view the picture when installing the projector in the front of the screen Install the projector at the side where you are watching the screen. Select Menu > Setup > Install > Front-Floor 2-2-2 Leveling with Adjustable Feet For level placement of the projector, adjust the Adjustable Feet of the projector. You may adjust the level of the proje
Résumé du contenu de la page N° 12
2-2-3 Zoom and Focus Adjustment Focus the picture on the screen using the Focus Ring. Focus Ring If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. 2-2-4 Screen Size and Projection Distance Install the projector on a flat, even surface and level the projector using the adjustable feet to realize optimal picture quality. If images are not clear, adjust them using the Fo
Résumé du contenu de la page N° 13
2-3-1 Connecting with a PC 1. Connect [PC IN] port on the rear side of the projector to the monitor output port of the PC using a PC video cable. 2. When connections are all completed, connect both power cords of the projector and the PC. 3. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and play and therefore, if you use Window XP, you do not need to setup the driver on your PC. Using the P
Résumé du contenu de la page N° 14
3. Press the [Advanced] button. Another property window will appear. 4. Click on [Monitor] tab and set the by referring to described in the Supported Resolution/Size Modes table. This will set both the vertical and horizontal frequencies. 5. Click the [OK] button to close the window, and click the [OK] button of the window to close the window. The computer may restart automatically. 6. Shut down the PC and connect to the project
Résumé du contenu de la page N° 15
2-3-3 Supported Display Modes HORIZONTAL VERTICAL CLOCK RESOLUTION FREQUENCY FREQUENCY FREQUENCY(MH POLARITY (KHZ) (HZ) Z) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 350 37.861 85.080 31.500 +/- VESA, 640 x 400 37.861 85.080 31.500 +/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 640 x
Résumé du contenu de la page N° 16
2-4 Connecting the Power Rear of Projector 1. Connect the adapter to the power port. 2. Connect the power cord to the adapter and connect it to a wall outlet. 3. When the power is connected, the screen turns on automatically. Do not look at the lens while connecting the power. Use only an Samsung authorized adapter. 2-5 Connecting an A/V device with an audio/video cable 1. Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of the video equipment using
Résumé du contenu de la page N° 17
2-6 Connecting an A/V device with a Component/D-Sub Cable 1. Connect [PC IN] input port on the rear of the projector to the COMPONENT port of AV equipment using a D-Sub/Component cable(Not supplied). 2. Connect audio cable(Not supplied) to the audio input port on the rear of the projector. 2-7 Connecting a USB Device 1. Connect your USB device to the USB port at the back of the projector to play videos, photos, and music. Available file system: FAT, FAT32(NTFS is not supported.) Multi Par
Résumé du contenu de la page N° 18
Locking the product 1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking direction. 2. Connect the Kensington Lock cable. 3. Tie the Kensington lock cable to a desk or heavy object. You can purchase the locking device from an electronics store or an online shop. Installation and Connection 2-8
Résumé du contenu de la page N° 19
3Using 3-1 Product Features • High Mobility Design • Small Size. • Lightweight. • Play videos, photos, music using a USB device. • Next Generation Backlight Light Source, LED Lamp • Effective energy saving by using low voltage. • Semi-permanent long lifetime guaranteed. 3-2 Front, Upper Using 3-1
Résumé du contenu de la page N° 20
NAME DESCRIPTION - TEMP (Red LED) 1.Indicators - STAND BY (Blue LED) Refer to the LED Indications. - 2. Lens cover You can adjust the screen position by moving the adjustable feet up and down. 3-1. Adjustable Feet - 3-2. Tripod holes - 4. Lens Used for Focus Adjustment. 5. Focus Ring 6. Move / Select / / : Use this button to move to or select an item within a menu. Volume button : Use this button to adjust the volume. Used to display Menu Screen. 7. MENU Button Use this button
