Résumé du contenu de la page N° 1
DLP™ PROJECTOR
MODEL
HC910
User Manual
HC910
This User Manual is important to you.
Please read it before using your projector.
ENGLISH
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning fl ash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of suffi cient magnitude to constitute a risk of electric shock. The exclamation point within an eq
Résumé du contenu de la page N° 3
Contents Important safeguards ........................................................................................................................4 Preparing your projector ....................................................................................................................6 Using the remote control ...................................................................................................................9 Setting up your projector .....................................
Résumé du contenu de la page N° 4
Important safeguards Please read all these instructions regarding your 10. Power sources projector and retain them for future reference. Follow This projector should be operated only from the all warnings and instructions marked on the projector. type of power source indicated on the marking label. If you are not sure of the type of power, 1. Read instructions please consult your appliance dealer or local All the safety and operating instructions should be power company. read before the ap
Résumé du contenu de la page N° 5
Do not touch the air outlet grille and WARNING: bottom plate, which become hot. Unplug immediately if there is something Do not touch them or put other equipment in front wrong with your projector. of the air outlet grille. The air outlet grille and bottom Do not operate if smoke, strange noise or odor comes plate, when heated, may cause injury or damage to out of your projector. It might cause fi re or electric other equipment. Also, do not set the projector on the shock. In this case, u
Résumé du contenu de la page N° 6
Preparing your projector Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Cables Power supply parts Mini D-SUB D-SUB 9-pin 15-pin Mini D-SUB 8-pin 15-pin RS-232C cable RGB cable for PC Power cord (two) (246C521-10) (246C508-10) (246C483-10, 246C383-20) • Used for projector control by computer. Remote control parts Filter parts Others • Lens cap (Attached to the projector) • User manual (E
Résumé du contenu de la page N° 7
Overview 1 FOCUS ring 12 3 2 ZOOM ring 3 Control panel 4 Air outlet grille 5 Remote control sensor (Front) 6 Air inlet grille 7 Air outlet grille 8 Terminal board 9 Kensington Security Lock Standard connector 10 Air inlet grille 4 57 6 8 9 10 Control area 1 POWER button 2 AUTO POSITION / button 5 3 COMPUTER / button 4 MENU button 5 STATUS indicator 1 6 POWER indicator 7 KEYSTONE/ENTER button 6 8 VIDEO/ button 9 button 7 2 Important: • While the menu is on the screen for the keystone
Résumé du contenu de la page N° 8
Preparating your projector (Continue) Bottom side 1 Adjustment foot (Front) 1 2 Lamp cover 3 Adjustment feet (Rear) Caution: 2 Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. 3 Remote control 1 ON ( ) button 19 2 DVI-D(HDCP) button 3 COMPUTER button ON POWER OFF 4 ENTER button 1 18 5 MENU button DVI-D (HDCP) COMPONENT 6 AV MEMORY buttons DVI COMP VIDEO 17 2 COMPUTER 7 CONTRAST button* PC S-VIDEO 3 16 8 GAMMA button*
Résumé du contenu de la page N° 9
Using the remote control Operational range of the remote control • Keep the remote control photo-sensor out of direct sunlight or fl uorescent lamp light. • Keep the remote control photo-sensor at least 2 m away from fl uorescent lamps. Otherwise, the re- Front of projector Rear of projector mote control may malfunction. • If there is an inverter-operated fl uorescent lamp near the remote control, the remote control opera- tion may become unstable. 30˚ 30˚ 30˚ 30˚ Operate the remote control wit
Résumé du contenu de la page N° 10
Setting up your projector Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See below.) • Install the screen and projector so that the projector’s lens is placed at the same height and horizontal position of the screen center. • Do not install the screen where it is exposed to direct sunlight or lighting. Light directly refl ecting on the screen makes the projected images
Résumé du contenu de la page N° 11
Screen size and projection distance Refer to the following table to determine the screen size. Screen size Center of the lens B (Width of the projected image) Projected distance (L) When the aspect ratio of the screen is 4:3, the positional relation between the projected image and Screen size the screen is as shown on the right. Refer to the following table for installation. B (Width of the projected image) When the aspect ratio of the screen is 16:9 Screen size Projected distance (L) 1
Résumé du contenu de la page N° 12
Viewing video images A. Connecting the projector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment are turned off. Basic home theater system connection CB/PB Y CR/PR COMPONENT VIDEO IN S-VIDEO IN VIDEO IN Video player DVD player Set-top box or digital tuner EN-12
Résumé du contenu de la page N° 13
Connecting to a video player, etc. Video player, or the like 1. Connect one end of the optional video cable to the VIDEO IN terminal of the projector. 2. Connect the other end of the video cable to the video output terminal of the video equipment. 2 COMPONENT VIDEO IN To video out- put terminal To VIDEO S-VIDEO IN 1 IN terminal VIDEO IN Video cable When the video equipment is equipped with the S-video Video player, or the like output terminal, make the connection as follows. S-video cable
Résumé du contenu de la page N° 14
Viewing video images (continued) Connecting to video equipment having a DVI-D terminal You can project high-quality images by connecting the DVI-D terminal of this projector to video equipment having a DVI-D output terminal. In addition, this projector supports HDCP and is able to receive encrypted digital video data that are output from DVD players. Audio cable (Option) Equipment having a To audio output To audio input DVI-D terminal terminals terminals To DVI-D terminal DVI cable (Option)
Résumé du contenu de la page N° 15
C. Projecting images Preparation: • Remove the lens cap. • Turn on the power of the connected video equipment. FOCUS ring COMPONENT button ZOOM ring ON ( I ) button VIDEO button S-VIDEO button POWER button POWER STATUS VIDEO button 1. Confi rm the POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER button may not work after the power cord is plugged. (The STATUS indicator blinks green.
Résumé du contenu de la page N° 16
Viewing video images (continued) OFF ( ) button POWER button POWER STATUS To stop projecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote control. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press the MENU button. 9. Press the POWER button on the projector or the OFF ( ) button on the remote control again. • The lamp goes out and the projector goes into a standby mode. In this standby mode, the POWER i
Résumé du contenu de la page N° 17
Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the input video signal. 4 : 3 16 : 9 EXPAND REAL* Projects images with Projects images Projects images in Projects images in an aspect ratio of 4:3 Original image size with an aspect the CinemaScope their original size when the input signal ratio of 16:9. size or Vista size as input. is 4:3 image. together with sub
Résumé du contenu de la page N° 18
Viewing computer images A. Connecting the projector to a computer Preparation: • Make sure that the power of the projector and that of the computer are turned off. • When connecting the projector to a desktop computer, disconnect the RGB cables that are connected to the monitor. For analog connection: 1. Connect one end of the supplied RGB cable to the COMPUTER IN/ COMPUTER IN/COMPONENT VIDEO IN terminal of the COMPONENT VIDEO IN projector. 1 2. Connect the other end of the RGB cable to
Résumé du contenu de la page N° 19
C. Projecting images Preparation: • Remove the lens cap. • Turn on the power of the connected computer. FOCUS ring ON ( I ) button ZOOM ring DVI-D(HDCP) button COMPUTER button POWER button POWER STATUS COMPUTER button 1. Confi rm the POWER indicator lights up red. • If the projector was turned off before the lamp was cooled down suffi ciently last time, the fan may start rotating and the POWER button may not work after the power cord is plugged. (The STATUS indicator blinks green.) After the f
Résumé du contenu de la page N° 20
Viewing computer images (continued) OFF ( ) button POWER button POWER STATUS To stop projecting: 8. Press the POWER button on the projector or the OFF ( ) button on the remote control. • A confi rmation message is displayed. • To cancel the procedure, leave the projector for a while or press the MENU button. 9. Press the POWER button on the projector or the OFF ( ) button on the remote control again. • The lamp goes out and the projector goes into a standby mode. In this standby mode, the POWE
