Instruction d'utilisation InFocus Proxima DP9200

Résumé du contenu de la page N° 1

ASK Proxima DP9200 Projectors
Frequently Asked Questions
How do I set up the DP9200/9210 remote mouse?
The DP9200 can emulate a mouse when connected to a computer using one of the remote mouse cables (serial, PS/2 or Mac
ADB) provided with the projector. In most cases, the DP will automatically detect and configure the remote when the
computer boots. There are a few cases where the DP will not be detected as a mouse.

Before you begin, ensure that if using:

Windows 95: In Control Panel

Résumé du contenu de la page N° 2

Does the DP9200 support interlaced signals ? The DP 9200 was designed to support non-interlaced signals. An interlaced signal is one that draws half the screen at a time, alternating lines. For example, the odd lines will be drawn, then the even, etc. To determine whether a signal is interlaced, look at the number of lines on the Input Measurements window on the Input Source menu. If the number of lines is approximately half of the expected resolution, the signal is interlaced. In additi

Résumé du contenu de la page N° 3

A9200-SGI • 900-00001-0 13W3 to VGA adapter (qty 2) • 900-94306 13W3 to SGI 13W3 cable (qty 1) • 900-94712 13W3 to SGI 13W3 adapter (qty 1) • Connection & Compatibility Guide (for SGI WS) • SRP = $199 A9200-DEC • 900-00001-0 13W3 to VGA adapter (qty 2) • 900-94806 13W3 to DEC 3W3 cable (qty 1) • 900-94710 13W3 to DEC 3W3 adapter (qty 1) • Connection & Compatibility Guide (for DEC WS) • SRP = $199 A9200-IBM • 900-00001-0 13W3 to VGA adapter (qty 2) • 900-95126 13W3 to