Résumé du contenu de la page N° 1
XS1
Reference Guide
Résumé du contenu de la page N° 2
Table of contents Hiding the image.......................... 40 Introduction..................3 Operating in a high altitude Projector features........................... 3 environment................................. 40 Shipping contents .......................... 4 Adjusting the sound ..................... 41 Projector exterior view ................... 5 Personalizing the projector Controls and functions ................... 6 menu display................................ 41 Shutting down the
Résumé du contenu de la page N° 3
Introduction Projector features The projector integrates high-performance optical engine projection and a user- friendly design to deliver high reliability and ease of use. The projector offers the following features. • Wall color correction allowing projection on surfaces of several predefined colors • Quick auto search speeding up the signal detecting process • Selectable password protected function • Up to 11 sets of picture modes providing multiple choices for different projection purposes
Résumé du contenu de la page N° 4
PUSH Shipping contents The projector is shipped with the cables required for connection to a PC or video equipment. Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Projector Remote Control & Battery Keypad Plug Reference Registration Warranty Safety Quick Start Guide Guide CD Ca
Résumé du contenu de la page N° 5
PUSH Projector exterior view 1. Lamp cover Front/upper side 5 2. Vent (heated air exhaust) 3. Projection lens 1 4. Quick-release button 5. External control panel (See "Projector" on page 6 for details.) 6 6. Focus ring 2 7. Vent (cool air intake) 7 8. Front IR remote sensor 3 9. AC power cord inlet 8 4 10. Kensington anti-theft lock slot 11. Rear adjuster foot 12. Ceiling mounting holes Rear/lower side 13. Rear IR remote sensor 14. Video input socket 14 15 16 17 18 13 19 20 21 22 15. S-Video
Résumé du contenu de la page N° 6
Controls and functions Projector 7. BLANK Used to hide the screen image. See 1 "Hiding the image" on page 40 for details. 8. LAMP indicator light 8 Indicates the status of the lamp. Lights 2 up or flashes when the lamp has 3 developed a problem. See "Indicators" on page 56 for details. 4 9 9. Keystone/Arrow buttons ( / Up, /Down) 5 10 Manually corrects distorted images 6 11 resulting from an angled projection. 12 7 See "Correcting keystone" on page 30 13 for details. 9 10. AUTO Automati
Résumé du contenu de la page N° 7
Remote control 5. Digital Zoom buttons (+, -) Magnifies or reduces the projected 6 image size. See "Magnifying and 1 searching for details on the projected 7 picture" on page 31 for details. 2 8 6. Menu/Exit 3 9 Turns on the On-Screen Display (OSD) menu. Exits and saves menu 10 4 settings. See "Using the menus" on 11 page 23 for details. 7 7. Keystone buttons ( Up/ , Down/ ) 5 Manually corrects distorted images resulting from an angled projection. See "Correcting keystone" on page 30 f
Résumé du contenu de la page N° 8
PUSH Approx. 15° Remote control effective range Infra-Red (IR) remote control sensors are located on the front and the back of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensors to function correctly. The distance between the remote control and the sensors should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensors on the projector that might o
Résumé du contenu de la page N° 9
Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations: 1. Front Table Select this location with the projector placed near the floor in front of the screen. This is the most common way to position the projector for quick setup and portability. 2. Front Ceiling Select this location with the projector suspended upside-down from the ceiling in front of the screen. Purchase the InFocus Projector Ceiling Mountin
Résumé du contenu de la page N° 10
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. 4:3 is the native aspect ratio of this projector. To be able to project a complete 16:9 (widescreen) aspect ratio image, the projector can resize and scale a widescreen image to the projector's native aspect width. This will result in a proportionally smaller height equivalent to 75% of the projector's native aspect he
Résumé du contenu de la page N° 11
InFocus has provided a table of 4:3-aspect-ratio screen sizes to assist you in determining the ideal location for your projector. There are two dimensions to consider, the perpendicular horizontal distance from the center of the screen (projection distance), and the vertical offset height of the projector from the horizontal edge of the screen (offset). How to determine the position of the projector for a given screen size 1. Select your screen size. 2. Refer to the table and find the close
Résumé du contenu de la page N° 12
4:3 Screen Diagonal Screen Center of lens Offset Projection distance 4:3 screen diagonal Recommended projection distance Vertical offset in Feet Inches mm from screen in mm mm 1692 900 101 6 72 1829 973 110 2000 1064 120 7 84 2134 1135 128 8 96 2438 1297 146 2500 1330 150 9 108 2743 1459 165 3000 1596 180 3007 1600 180 There is 3% tolerance among these numbers due to optical component variations. InFocus recommends that if you intend to permanently install the projector, you should physically
Résumé du contenu de la page N° 13
Connection When connecting a signal source to the projector, be sure to: 1. Turn all equipment off before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 4). They are commercially available from electronics stores. Connecting a computer or monitor Connecting a computer The projector provides a VGA and DVI input s
Résumé du contenu de la page N° 14
The final connection path should be like that shown in the following diagram: Notebook or desktop computer i. VGA cable or i ii ii. VGA to DVI-A iii cable iii.Audio cable Many notebooks do not turn on their external video ports when connected to a projector. Usually a key combo like FN + F3 or CRT/LCD key turns the external display on/off. Locate a function key labeled CRT/LCD or a function key with a monitor symbol on the notebook. Press FN and the labeled function key simultaneously. Refe
Résumé du contenu de la page N° 15
Connecting a monitor If you want to view your presentation close-up on a monitor as well as on the screen, you can connect the D-SUB OUT signal output socket on the projector to an external monitor with a VGA or VGA to DVI-A cable by following the instructions below. To connect the projector to a monitor (either through a VGA cable or VGA to DVI-A cable): • With a VGA cable: • With a VGA to DVI-A cable: Note: Your monitor must be equipped with a DVI input socket. 1. Connect the projector to
Résumé du contenu de la page N° 16
Connecting Video source devices This section describes how to connect the projector to Video source devices using video cables. Video cable connections are recommended for Video presentations. You can connect your projector to various Video source devices that provide any one of the following output sockets: •DVI • Component Video • S-Video • Video (composite) You need only connect the projector to a Video source device using just one of the above connecting methods, however each provides a
Résumé du contenu de la page N° 17
Connecting a DVI source device The projector provides a DVI input socket that allows you to connect it to a DVI source device like a DVD player, or a VGA output device like a notebook or desktop computer. There are three types of DVI connectors: DVI-A, DVI-D, and DVI-I. The DVI-I socket is an integrated connector which supports both formats: DVI-A, and DVI-D. DVI-A format is used to carry a DVI signal to an analog (VGA) display, or vice- versa. Although some signal quality is lost from the s
Résumé du contenu de la page N° 18
The final connection path should be like that shown in the following diagram: AV device DVI-D or Audio DVI-I cable cable In the unlikely event that you connect the projector to a DVD player via the projector’s DVI-D input and the projected picture displays wrong colors, please change the color space to YUV. See "Changing Color Space" on page 28 for details. 18 Connection
Résumé du contenu de la page N° 19
Connecting a Component Video source device Examine your Video source device to determine if it has a set of unused Component Video output sockets available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to a Component Video source device: 1. Take a Component Video to VGA (D-Sub) adaptor cable and connect the end with 3 RCA type connectors to the Component Video output sockets of t
Résumé du contenu de la page N° 20
Connecting an S-Video source device Examine your Video source device to determine if it has an unused S-Video output socket available: • If so, you can continue with this procedure. • If not, you will need to reassess which method you can use to connect to the device. To connect the projector to an S-Video source device: 1. Take an S-Video cable and connect one end to the S-Video output socket of the Video source device. 2. Connect the other end of the S-Video cable to the S-VIDEO socket on
