Instruction d'utilisation Hitachi CP-X8150

Résumé du contenu de la page N° 1

Projector
CP-X8150/CP-WX8240
User's Manual (detailed)
Operating Guide – Drawing function
Drawing function
Main Functions
Drawing function enables you to draw on the projector’s screen with USB mouse
or tablets connected to the USB TYPE A ports.
ü Drawing on projected images
You can draw pictures or text on images projected by our projectors.
NOTE • Authorization by the copyright owner(s) is required pursuant to
including visual images, if such works are copyrighted works.
• This drawing fu

Résumé du contenu de la page N° 2

Drawing function Connecting the Pen tablet / USB mouse and USB Memory Devices Connect into the USB TYPE A port on your projector. To save an image that has been drawn, a USB memory device must also be connected to a USB TYPE A port of the projector. If the projector only has one availabe USB TYPE A port, use a USB hub to connect both devices. NOTE • Some USB memory devices and/or USB hubs may not operate properly. • Before removing the USB storage device from the port of the projector, be su

Résumé du contenu de la page N° 3

Drawing function Using the Drawing Function Touching/clicking Hitachi Pen tablet / USB mouse function key starts up the drawing mode. A tool bar like the figure below is displayed on the projector screen while in the drawing mode. Touching/clicking an icon on the tool bar enables the following functions. Touching anywhere on the tool bar except an icon and dragging moves the toobar. 1 2 3 4 5 6 7 8 9 NOTE • Images may be copyrighted, in which case, permission from the copyrigh

Résumé du contenu de la page N° 4

Drawing function Using the Drawing Function (continued) 4. Eraser Switches the electronic pen function to that of an eraser and specifies its size. The cursor turns into an Eraser ; dragging it erases previously drawn lines. Specifies a 12-dot Eraser. Specifies a 20-dot Eraser. Specifies a 28-dot Eraser. 5. Erase Erases all the lines drawn with the pen. 6. Projector Operates the projector. Operation Calls up and display the previous file in the USB memory device from that currently selecte

Résumé du contenu de la page N° 5

Drawing function Using the Drawing Function (continued) 6. Projector Temporarily blanks out the display. Operation Touching anywhere in the tablet’s operation area recovers the (continued) display. Toggles between display/hide the Pattern (grid lines). Cycles through the display source signals. • It can be used in the same way as the INPUT button on the projector’s control panel. However, images cannot be selected from LAN port or USB TYPE B port. Turns off the projector. Touch/click the ico