Résumé du contenu de la page N° 1
VISUAL PRESENTER
HV-7100SX
INSTRUCTION MANUAL
Please read this instruction manual carefully before using this product and keep it for future reference.
Résumé du contenu de la page N° 2
IMPORTANT SAFEGUARDS Read Instructions – All the safety manufacturer's instructions, and and operating instructions should be should use a mounting accessory read before the appliance is recommended by the manufacturer. operated. Ventilation – Slots and openings in Retain Instructions – The safety and the cabinet are provided for operating instructions should be ventilation and to ensure reliable retained for future reference. operation of the product and to protect it from overheating, an
Résumé du contenu de la page N° 3
Grounding or Polarization – This Overloading – Do not overload product may be equipped with either wall outlets, extension cords, or a polarized 2-wire AC line plug (a integral convenience receptacles as plug having one blade wider than the this can result in a risk of fire or other) or a 3-wire grounding type electric shock. plug, a plug having a third A product and (grounding) pin. The 2-wire polarized cart combination plug will fit into the power outlet only should be moved one way. Thi
Résumé du contenu de la page N° 4
Damage Requiring Service – Safety Check – Upon completion of Unplug this product from the wall any service or repairs to this product, outlet and refer servicing to qualified ask the service technician to perform service personnel under the following safety checks to determine that the conditions: product is in proper operating condition. When the power-supply cord or plug is damaged. Heat – The product should be If liquid has been spilled, or situated away from heat sources such objec
Résumé du contenu de la page N° 5
The lightning flash with arrowhead symbol, within an INFORMATION equilateral triangle, is intended This equipment has been tested to alert the user to the presence and found to comply with the of uninsulated "dangerous limits for a Class A digital SA 1965 voltage" within the product's device, pursuant to Part 15 of enclosure that may be of sufficient magnitude to constitute the FCC Rules. These limits are a risk of electric shock to designed to provide reasonable persons. This marking is locate
Résumé du contenu de la page N° 6
BEFORE YOU USE Use this product under the rated electrical conditions. Do not leave this product under direct sunlight or by heaters, or this product may be discolored, deformed, or damaged. Do not place this product in any humid, dusty, windy or vibrating location. Use this product in the following environmental conditions: Temperature: 5°C~40°C (41°F~104°F) Humidity: 30%~85% (No condensation) Use a soft, dry cloth for cleaning. Do not use any volatile solvent, such as thinner or benz
Résumé du contenu de la page N° 7
CONTENTS 1. PART NAMES 1 AND FUNCTIONS 1. PART NAMES AND FUNCTIONS Appearance .......................................................8 Front Operation Panel...........................................9 2. WIRELESS REMOTE Rear Panel .......................................................10 2 CONTROL Wireless Remote Control .....................................11 2. WIRELESS REMOTE CONTROL Receivable Range ..............................................13 3. MOUSE 3 Preparation ...............
Résumé du contenu de la page N° 8
CONTENTS 1. PART NAMES 1 AND FUNCTIONS Preset Operation ...............................................33 Image Memory..................................................34 Splitting the Screen ............................................35 2. WIRELESS REMOTE F.A.M. (Frame Accumulate Mode)..........................35 2 CONTROL Installation of LCD Monitor...................................36 Connecting to the LCD Monitor .............................36 "Utility Software CD-ROM" ..............
Résumé du contenu de la page N° 9
1 PART NAMES AND FUNCTIONS 1 Appearance 2 Camera Head 3 Lamp Arm Upper Lamp 4 Infrared Sensor Lighting Unit Column Lighting Unit Arm 5 Scroll Mouse Infrared Emitting Column Lock Part Button Press this button to 6 raise/fold the column. Wireless Remote Control 7 Pocket for Wireless Remote Control Stage Base Lamp Front Operation Panel 8 Microphone Jack 9 10 11 8
Résumé du contenu de la page N° 10
Front Operation Panel 1 1 Pause 2 Iris White 3 Balance 2 WHITE IRIS MONITOR OUTPUT RGB1 PAUSE OPEN CLOSE AUTO/MANUAL BALANCE TELE MAIN AF ZOOM RGB2 IMAGE ROTATION POSI / NEGA LAMP CONTRAST F.A.M. WIDE 3 UPPER / BASE / OFF 4 6 8 4 Monitor Output 5 F.A.M. Image 7 Posi/Nega Lamp 9 Contrast 10 11 Auto Zoom Selection Rotation Conversion Focus 5 Name Function Reference Page 1 To change the setting between still image Pause P.26 and video. 6 2 Iris P.29 To adjust the brightness of the screen.
Résumé du contenu de la page N° 11
Rear Panel 1 3 5 6 1 Power Cord 2 12VDC Out RS-232C 4 Stereo Analog RGB-out Analog RGB-in Audio Receptacle Terminal Terminal Terminal Terminal 1 Output . . [ ] [AC IN] [DC12V] RS-232C [OUTPUT RGB OUT] [INPUT RGB1] Terminal 2 3 4 Mouse USB Vide-out Terminal Analog RGB-in 11 Stereo DIP 7 8 9 10 12 . Terminal Terminal [OUTPUT S-VIDEO Terminal 2 Audio Switch . [MOUSE] [USB] /VIDEO] [INPUT RGB2] Input S-Video (mini DIN 4P), Terminal Composite video (RCA pinjack) 1/2 5 Name Func
Résumé du contenu de la page N° 12
Name Function Reference Page 1 Input image is output through analog 10 Analog RGB-in P.22 Terminal 2 RGB-out terminal and video-out terminal . when the input selection is set at RGB2. [INPUT RGB2] Stereo Audio Input To output input sound from audio output 11 P.22 2 terminal when the input selection is set at Terminal 1/2 RGB1/2. 12 DIP Switch The functions can be switched as follows: P.15 ◊[A] key: To switch the resolution of the image output from the RGB output terminal [RGB-OUT]. 3 ◊
Résumé du contenu de la page N° 13
Button Name Function Reference Page 1 1 PAUSE To change the setting between still image P.26 and video. 2 ELECTRONIC 2X To double the image size. P.24 ENLARGEMENT 3 ARROWS To scroll the screen during magnification 2 (electronic enlargement) mode. This button is also used to move the pointer when it appears. 4 MEMORY NO. The memory No. used with 5 to 8 . P.35 3 When the live image and the image from the memory are displayed together by splitting the screen in half, the [1] and [3] but
Résumé du contenu de la page N° 14
° 30° 30° 30 2 WIRELESS REMOTE CONTROL 1 Receivable Range Point the infrared emitting part of the wireless remote control at the infrared sensor of this product, and press the button for desired function. The receivable range may be narrowed 2 when the Presenter is placed under sunlight, near an inverter fluorescent lamp or in any other unfavorable surroundings. Depending on the conditions of fluorescent lamps, etc. the sensor may fail to receive the infrared light. In such a case, relocate thi
Résumé du contenu de la page N° 15
3 MOUSE 1 Connect the mouse to the mouse terminal [MOUSE] on the rear panel. Mouse Operation 2 • Click the right button Mouse To display or clear the pointer and OSD menu, operate Right button the OSD menu, drawing function control, screen scroll Left button start and electronic enlargement. 3 Moves in the following sequence during normal use; Displaying pointer → Displaying ENTER icon → Displaying OSD menu → Clearing OSD menu → Clearing ENTER icon → Clearing pointer. Displaying and clearing 4 o
Résumé du contenu de la page N° 16
4 SETTING UP AND CONNECTION 1 Setting Up (1) Unfold the lamp arms fully until they come to the dead end. 2 Unfold in the sequence specified in the drawing 2 1 shown to the right. 3 (2) Press the column lock button, and raise the column until the column lock button returns to the original position. Make sure that the column 4 has been completely locked. 5 (3) Turn the camera head until the lens faces to the 5 stage. 3 4 (4) Plug the power cord into the power cord 6 receptacle of this product and
Résumé du contenu de la page N° 17
Connection to the analog RGB-out terminal · Connect the analog RGB-out terminal [OUTPUT RGBOUT] to the equipment having an analog 1 RGB-in terminal with the analog RGB cable (attached) or a connection cable available on the market. At this time, the position of the display may be deviated from the center. If deviated, manually adjust the horizontal and vertical positions on the connected equipment side. 2 Also, vertical stripes may appear on the screen of the LCD projector. That can be allevia
Résumé du contenu de la page N° 18
5 STORING 1 Storing When the LCD monitor is mounted, this product cannot be stored. 2 1 Remove the LCD monitor, and then store this product. (1) Turn off the power switch, and unplug the power cord and the video cable. 3 (2) Turn the camera head so that it may be ready to be stored. 4 The illustration shows the right storage position of the camera head. Never apply excessive force to the column. 5 (3) Press the column lock release button, and fold 2 down the main column. 3 The illustration show
Résumé du contenu de la page N° 19
6 OPERATION PROCEDURES 1 Simple steps for Presenting Printed Material Front operation panel Wireless remote control 2 LIVE PAUSE MEMORY WHITE 2x IRIS MONITOR OUTPUT RGB1 PAUSE OPEN CLOSE AUTO/MANUAL BALANCE TELE SET PRESET CALL SET IMAGE CALL MAIN AF ZOOM RGB2 IMAGE ROTATION POSI / NEGA LAMP CONTRAST POSI/NEGA COLOR/B&W UPPER LAMP BASE 3 F.A.M. WIDE MAIN MONITOR RGB1 RGB2 OUTPUT UPPER / BASE / OFF TELE ZOOM WIDE NEAR FOCUS FAR (2) NORMAL OPEN CLOSE AF (3) IRIS (2) (3) 4 (1) Turn on the power swi
Résumé du contenu de la page N° 20
Steps for Showing Transparent Material 1 Front operation panel Wireless remote control 2 LIVE PAUSE MEMORY 2x WHITE MONITOR OUTPUT RGB1 PAUSE OPEN IRIS CLOSE AUTO/MANUAL TELE BALANCE SET PRESET CALL SET IMAGE CALL MAIN ZOOM AF POSI/NEGA COLOR/B&W LAMP RGB2 F.A.M. IMAGE ROTATION POSI / NEGA LAMP CONTRAST WIDE UPPER BASE (1) MAIN MONITOR RGB1 RGB2 OUTPUT UPPER / BASE / OFF TELE ZOOM WIDE NEAR FOCUS FAR (2) 3 AF NORMAL OPEN CLOSE (1) IRIS (2) 4 (1) Press the [LAMP] button on the front panel or Fro
