Résumé du contenu de la page N° 1
Liquid Crystal Projector
28A8751
USER'S MANUAL
Please read this user's manual thoroughly to ensure correct usage through understanding.
TECHNICAL PORTGÊS NEDERLANDS ESPAÑOL ENGLISH
FRANÇAIS
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
Résumé du contenu de la page N° 4
Résumé du contenu de la page N° 5
Résumé du contenu de la page N° 6
Résumé du contenu de la page N° 7
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
Résumé du contenu de la page N° 10
Résumé du contenu de la page N° 11
Liquid Crystal Projector USER'S MANUAL USER'S MANUAL Thank you for purchasing this liquid crystal projector. WARNING • Please read the accompanying manual “SAFETY INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference. NOTE • The information in this manual is subject to change without notice. • The manufacturer assumes no responsibility for any errors that may appear in thi
Résumé du contenu de la page N° 12
FEATURES FEATURES This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized. Outstanding Brightness The UHB lamp and high-efficiency optical system assure a high level of brightness. Partial Magnification Function Interesting parts of images can be magnified for closer viewing. Distortion Correction Function Distortion-free images are quick
Résumé du contenu de la page N° 13
BEFORE USE (continued) BEFORE USE (continued) Part Names Zoom Knob Focus Ring Remote Control Sensor Power Switch Lens AC Inlet Slide Lens Door (to the Power Cord) Foot Adjuster Ventilation Openings Front / Left View (Intake) Control Panel (Refer to P.8 "OPERATIONS") LAMP Indicator RESET Button KEYSTONE Button TEMP Indicator POWER Indicator INPUT Button STANDBY/ON Button MENU Button Foot Adjuster Button Ventilation Openings Air Filter and Intake (Exhaust) (for the Cooling Fan) Speaker Rear Foot
Résumé du contenu de la page N° 14
BEFORE USE (continued) BEFORE USE (continued) Part Names (continued) VIDEO Button STANDBY/ON VIDEO RGB STANDBY/ON Button RGB Button KEYSTONE KEYSTONE Button MENU SELECT Button Button MENU SELECT Button POSITION Button Button MENU RESET POSITION Button RESET Button MENU Button MAGNIFY Button VOLUME Button MAGNIFY FREEZE VOLUME MAGNIFY Button VOLUME Button MUTE OFF MAGNIFY Button FREEZE Button OFF AUTO BLANK MUTE Button AUTO Button BLANK Button Battery Holder (Refer to Page.8 "OPERATIONS") Remote
Résumé du contenu de la page N° 15
INSTALLATION INSTALLATION Installation of the Projector and Screen Refer to the drawing and table below for determining the screen size and projection distance. The projection distances shown in the table below Screen are for full size. a: Distance from the projector to the screen. (±10%) b: Distance from the lens center to the bottom of the screen. (±10%) Table 1. Installation Reference TOP VIEW a [inches (m)] Screen size b [inches (m)] [inches (cm)] Min. Max. 40 (1.0) 37 (0.9) 46 (1.2) 3
Résumé du contenu de la page N° 16
INSTALLATION (continued) INSTALLATION (continued) Cabling Refer to the table below for connecting each terminal of the projector to a device. Table 2. Cabling Function Terminal Cable Accessory RGB cable or optional RGB Analog RGB input RGB cable with D-sub 15-pin shrink jack and inch thread screws RS-232C communication CONTROL Optional RS-232C cable Audio input AUDIO Optional audio cable with stereo mini jack (from the computer) COMPONENT VIDEO Y Component video input COMPONENT VIDEO CB/PB Acces
Résumé du contenu de la page N° 17
INSTALLATION (continued) INSTALLATION (continued) Power Connection Use the correct power cord depending on the power outlet to be used. Connect the AC inlet of the projector to the power outlet firmly by the power cord. Power outlet CAUTION • Be carful in handling the power cord according to instructions of the accompanying manual "SAFETY INSTRUCTIONS" and this manual. • Connect the power cord firmly. Avoid using a loose, unsound outlet or failed contact. Power Cord AC Inlet Example of system se
Résumé du contenu de la page N° 18
OPERATIONS OPERATIONS STANDBY/ON Button POWER Indicator STANDBY/ON VIDEO RGB STANDBY/ ON Button KEYSTONE MENU SELECT Zoom knob MENU POSITION RESET Focus ring MAGNIFY FREEZE VOLUME Power Switch Slide Lens door Power ON 1. Check that the power cord is connected correctly. 2. Set the power switch to [ | ]. The standby mode is selected, and the POWER indicator is turned to orange. 3. Press the STANDBY/ON button on the control panel or the remote controller. Warm-up begins and the POWER indicator bli
Résumé du contenu de la page N° 19
OPERATIONS (continued) OPERATIONS (continued) Basic Operation The basic operations shown in Table 3 is performed from the supplied remote controller or the projector control panel. Items indicated by (*) may be used from the control panel. Table 3 . Basic Operation Item Description Select Input Signal (*) : Press the INPUT button. RGB→ VIDEO → S-VIDEO → COMPONENT (→ RGB) Select RGB Input : Press the RGB button. VIDEO/S-VIDEO/COMPONENT → RGB INPUT Select Video Input : Press the VIDEO button. SELE
Résumé du contenu de la page N° 20
OPERATIONS (continued) OPERATIONS (continued) Items indicated by (*) may be used from the control panel. Table 3. Basic Operation (continued) Item Description Volume Adjustment : Press the VOLUME / button. VOLUME reduces the volume ↔ increases the volume Set/Clear Mute Mode : Press the MUTE button. MUTE No sound is heard in the MUTE mode. Automatic Adjustment at RGB Input : Press the AUTO button. Horizontal position(H.POSIT), vertical position (V.POSIT),clock phase (H.PHASE), and horizontal si
