Résumé du contenu de la page N° 1
W1070/W1080ST
Digital Projector
Home Cinema Series
User Manual
Résumé du contenu de la page N° 2
Table of contents Adjusting the projection angle .................29 Important safety instructions.......3 Correcting picture distortion....................29 Overview..........................................6 Using the preset and user modes ...... 30 Fine-tuning the picture quality ............ 31 Shipping contents......................................6 Advanced picture quality controls..... 33 Replacing the remote control batteries......................................................7 Adjus
Résumé du contenu de la page N° 3
Thank you for your purchase of this quality BenQ video projector! It has been designed to provide you with an enjoyable home theater viewing experience. For the best results, please read this manual through carefully as it is your guide through the control menus and operation. Important safety instructions Your projector is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that you foll
Résumé du contenu de la page N° 4
5. Do not block the vents holes while the projector 9. Do not look straight into the projector lens is on (even in standby mode): during operation. It may harm your sight. - Do not cover the projector with any item; - Do not place the projector on a blanket, bedding or any other soft surface. 6. In areas where the mains power supply voltage 10. Do not operate the projector lamp beyond the may fluctuate by ±10 volts, it is recommended rated lamp life. Excessive operation of lamps that you c
Résumé du contenu de la page N° 5
13. Never attempt to replace the lamp assembly until Moisture condensation the projector has cooled down and is unplugged Never operate the projector immediately after from the power supply. moving it from a cold location to a hot location. When the projector is exposed to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the projector from possible damage, do not use the projector for at least 2 hours when there is a sudden change in tempera
Résumé du contenu de la page N° 6
Overview Shipping contents Carefully unpack and verify that you have the items below. Some of the items may not be available depending on your region of purchase. Please check with your place of purchase. Some of the accessories may vary from region to region. The warranty card is only supplied in some specific regions. Please consult your dealer for detailed information. W1070 W1080ST Projector Remote control Batteries User manual CD Warranty card Quick start guide Power cable VGA cable Car
Résumé du contenu de la page N° 7
Approx. +15º Approx. +15º Replacing the remote control batteries 1. To open the battery cover, turn the remote control over to view its back, push on the finger grip on the cover and slide it up in the direction of the arrow as illustrated. The cover will slide off. 2. Remove any existing batteries (if necessary) and install two AAA batteries observing the battery polarities as indicated in the base of the battery compartment. Positive (+) goes to positive and negative (-) goes to negative. 3
Résumé du contenu de la page N° 8
If you use a non-BenQ brand projector ceiling mount kit, there is a safety risk that the projector may fall from the ceiling due to an improper attachment through the use of the wrong gauge or length screws. You can purchase a BenQ projector ceiling mount kit from the place you purchased your BenQ projector. BenQ recommends that you also purchase a separate Kensington lock compatible security cable and attach it securely to both the Kensington lock slot on the projector and the base of the ce
Résumé du contenu de la page N° 9
Projector features • Full HD compatible The projector is compatible with Standard Definition TV (SDTV) 480i, 576i, Enhanced Definition television (EDTV) 480p, 576p and High Definition TV (HDTV) 720p, 1080i/p 60Hz formats, with the 1080p format providing a true 1:1 image reproduction. • High picture quality The projector provides excellent picture quality due to its high resolution, excellent home theater brightness, high contrast ratio, vivid color and rich gray-scale reproduction. • High bri
Résumé du contenu de la page N° 10
Projector exterior view Front and upper side view 1. Control panel (See "Control panel" on W1070 page 11 for details.) 1 2. Lamp cover 2 3. Vent (heated air exhaust) 6 4. Quick-release button 7 5. Lens cap 6. Lens shift lever 8 3 7. Focus and Zoom ring 9 8. Vent (cool air intake) 9. Speaker grill 10 4 10.Front IR sensor 11.Projection lens 11 5 12.HDMI ports 13.12VDC output terminal W1080ST Used to trigger external devices such 1 as an electric screen or light control, 2 etc. Consult your d
Résumé du contenu de la page N° 11
Controls and functions Control panel 1 2 9 3 10 4 11 5 12 6 13 14 7 15 8 12 1. Focus ring 12.Keystone/Arrow keys ( / Up, / Down) Adjusts the focus of the projected image. 2. Zoom ring Manually corrects distorted images resulting from an angled projection. Adjusts the size of the image. 3. POWER indicator light 13. Right/ Lights up or flashes when the projector is Increases the projector volume. under operation. When the On-Screen Display (OSD) menu is 4. MENU/EXIT activated, the #7, #12, and
Résumé du contenu de la page N° 12
Remote control 1 10.Digital Zoom (+, -) Magnifies or reduces the projected picture size. 2 11.Picture quality adjustment keys 7 13 3 (Brightness, Contrast, Color, Tint) 14 4 Displays the setting bars for adjustment of the 5 appropriate picture quality values. 15 6 12.3D Setting 7 16 8 Enters 3D settings directly. 9 13.AUTO 10 Automatically determines the best picture 17 11 timings for the displayed image. 18 19 14. Right 20 When the On-Screen Display (OSD) menu is 21 12 activated, the #4, #7,
Résumé du contenu de la page N° 13
Positioning your projector Choosing a location Your projector is designed to be installed in one of four possible installation locations. Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. 1. Front: 3. Rear: Select this location with the projector placed near Se
Résumé du contenu de la page N° 14
Obtaining a preferred projected image size The distance from the projector lens to the screen, the zoom setting, and the video format each factors in the projected image size. The projector should always be placed horizontally level (like flat on a table), and positioned directly perpendicular 90° right-angle square) to the screen. This prevents image distortion caused by angled projections (or projecting onto angled surfaces). If the projector is mounted on a ceiling, it must be mounted ups
Résumé du contenu de la page N° 15
size screens. The projector can be adjusted (using the zoom control) to display on these different screen sizes at the projection distance. Be aware that these different screens have different vertical offset values. If you place the projector in a different position (to that recommended), you will have to tilt it down or up to center the image on the screen. In these situations, some image distortion will occur. Use the Keystone function to correct the distortion. See "Correcting picture dis
Résumé du contenu de la page N° 16
Projection dimensions Installation for a 16:9 ratio screen Ceiling Installation Floor Installation : Screen : Center of lens : Screen : Center of lens W1070 The screen aspect ratio is 16:9 and the projected picture is 16:9 Screen dimensions Projection distance [mm] Lowest/Highest Diagonal Height Width Min distance Max distance lens position (with max Average (with min [mm] [inch
Résumé du contenu de la page N° 17
W1080ST The screen aspect ratio is 16:9 and the projected picture is 16:9 Screen dimensions Projection distance [mm] Lowest/Highest Diagonal Height Width Min distance Max distance lens position (with max Average (with min [mm] [inch [mm] [mm] zoom) zoom) (mm)] 30 (762) 374 664 457 502 548 9 40 (1016) 498 886 609 670 731 12 50 (1270) 623 1107 761 837 913 16 60 (1524) 747 1328 913 1005 1096 19 70 (1778) 872 1550 1065 1172 1279 22 80 (2032) 996 1771 1218 1339 1461 25
Résumé du contenu de la page N° 18
Installation for a 4:3 ratio screen The illustrations and table below are provided for those users who already have 4:3 aspect ratio screens or intend to purchase 4:3 aspect ratio screens to view 16:9 ratio projected images. Floor Installation Ceiling Installation : Screen : Center of lens : Screen : Center of lens W1070 The screen aspect ratio is 4:3 and the projected picture is 16:9 Projection
Résumé du contenu de la page N° 19
W1080ST The screen aspect ratio is 4:3 and the projected picture is 16:9 Projection distance Screen dimensions Lowest/ [mm] Highest Image Min lens Max height Diagonal Height Width distance position distance [mm] (with Average (with min [inch (mm)] [mm] [mm] max zoom) [mm] zoom) 30(762)343 610 419 461 503 9 218 40(1016)457 813 559 615 671 11 290 50(1270)572 1016 699 768 838 14 363 60(1524)686 1219 838 922 1006 17 435 70(1778)800 1422 978 1076 1174 20 508 80(2032
Résumé du contenu de la page N° 20
Shifting the projection lens vertically The vertical lens shift control provides flexibility for installing your projector. It allows the projector to be positioned slightly above or below the top level of the projected images. The lens shift (offset) is expressed as a percentage of the projected image height. It is measured as an offset from the projected image's vertical center. You can use the lever to shift the projection lens upwards or downwards within the allowable range depending on
