Résumé du contenu de la page N° 1
MULTIMEDIA PROJECTOR
MODEL LC-X1UA
LC-X1UL (Without Lens)
OWNER’S INSTRUCTION MANUAL
Résumé du contenu de la page N° 2
INFORMATION TO THE USER NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment, This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to
Résumé du contenu de la page N° 3
IMPORTANT SAFETY INSTRUCTIONS All the safety and operating instructions should be read before the product b, If liquid has been spilled into the projector. is operated. c. If the projector has been exposed to rain or water. d. If the projector does not operate normally by following the operating Read all of the instructions given here and retain them for later use. instructions. Adjust only those controls that are covered by the Unplug this projector from AC power supply before
Résumé du contenu de la page N° 4
TABLE OF CONTENTS PAGE PAGE FOCUS ADJUSTMENT 30 INTRODUCTION 5 COMPATIBILITY 5 LENS SHIFT FUNCTION 30 IMAGE RESOLUTION 5 NORMAL PICTURE FUNCTION 30 UNPACKING THE PROJECTOR 5 NO SHOW FUNCTION 30 TRADEMARKS 5 P-TIMER FUNCTION 30 POWER REQUIREMENT 5 FREEZE PICTURE FUNCTION 30 DESCRIPTION 6 AUTO IMAGE FUNCTION 30 SETTlNG-UP THE PROJECTOR 7-8 MENU OPERATION 31-47 POSITIONING 7 MODE SELECT 31 ROOM LIGHT 7 LEVELING AND ELEVATING ADJUSTMENTS
Résumé du contenu de la page N° 5
INTRODUCTION The multimedia projector that combines powerful and sophisticated features with easy-to-use, intuitive controls. Built- in multimedia features include audio, a palette of 16.77 million colors and active matrix liquid crystal display (LCD) technology. The projector is ideal for high-performance business, training and imaging applications that demand exceptional cob quality COMPATABILITY The projector is compatible with many different types of personal computers and video de
Résumé du contenu de la page N° 6
DESCRIPTION
Résumé du contenu de la page N° 7
SETTING-UP THE PROJECTOR POSITIONING; • This projector is basically designed to project on a flat projection surface. • This projector can be focused from 3.6’ (1.1 m) 73.2’ (22.3m). • Refer to the figure below as an example when positioning the projector to the screen. THIS PROJECTOR SHOULD BE SET IN THE WAY INDICATED. NEVER HANG THE PROJECTOR, OR FALL DOWN ON ITS SIDE. IT MAY RESULT IN FIRE HAZARD.
Résumé du contenu de la page N° 8
VENTILATION Although this projector has a cooling fan to protect from overheating, please be careful to set the projector so that it can cool properly and you can avoid a risk of fire and malfunction. •Do not cover the vents with papers or other materials. •Keep the rear grill at least 3.3’ (1 m) away from any object. •Make sure that there are no objects under the projector. An object under the projector may prevent the projector from taking the cooling air through the bottom vent.
Résumé du contenu de la page N° 9
CONNECTING THE PROJECTOR CONNECTING THE COMPUTER CONNECT NC TO THE COMPU ER. PUT 1 JACKS (BNC TYPE x 5) Personal computers can be connected to the computer input (Red, Green, Blue, Horiz. Sync. and Vert. Sync.) on the projector. • Connect the computer to these jacks using the BNC cables (not provided). CONNECTING TO THE COMPUTER INPUT 2 TERMINAL {HDB1 5-PIN (VGA)} Personal computers can be connected to the HDB1 5-pin (VGA) terminal on the projector. • Connect the computer to these
Résumé du contenu de la page N° 10
CONNECTING TO THE COMPUTER AUDIO MONITOR OUTPUT (VARIABLE) JACKS These jacks will contain the audio information of the selected program source being viewed on the screen (Computer 1 or Computer 2). If you have selected program source Computer 2 the audio signal connected to the Computer 2 audio input jack will be available at the computer audio monitor output jacks. If you select program source “Video 1” or “Video 2, the audio signal connected to the Computer 1 audio input jack will be
Résumé du contenu de la page N° 11
CAUTION The hook up should be done as per the above illustration. After hook up~ turn on the projector, monitor, computer, in that order.
Résumé du contenu de la page N° 12
CAUTION The hook up should be done as per the above illustration. After hook up, turn on the projector, monitor, computer, in that order.
Résumé du contenu de la page N° 13
CAUTION The hook up should be done as per the above illustration. After hook up, turn on the projector, computer, in that order.
Résumé du contenu de la page N° 14
CAUTION The hook up should be done as per the above illustration. After hook up, turn on the projector, computer, in that order.
Résumé du contenu de la page N° 15
CONNECTING THE VIDEO EQUIPMENT CONNECTING TO THE VIDEO INPUT JACKS (1 and 2) BNC TYPE x 3 Connect to the video outputs of a VCR, video disc player, DVD player, video camera, satellite TV tuner or other AV equipment. Connect video output from AV equipment to these jacks using the BNC cables. The video input can be selected 3 type of the input. “COMPOSITE VIDEO”, “Y/C SEPARATE VIDEO” and COMPONENT VIDEO {Y, Cb (B-Y), Cr (R-Y)}. When the video equipment with COMPOSITE VIDEO type output
Résumé du contenu de la page N° 16
NOTE: The hook up should be done as per the above illustration. After hook up, turn on the projector, video equipment, in that order.
Résumé du contenu de la page N° 17
OPERATION OF CONTROLS
Résumé du contenu de la page N° 18
LAMP REPLACEMENT INDICATOR 1 Light is orange when projection lamp is nearing end of service life. TEMPERATURE WARNING INDICATOR 2 Rashes red when internal projector temperature is too high. READY INDICATOR 3 Light is green when projector lamp is ready to be turned on. LAMP POWER INDICATOR 4 Light is dim when the projector is on. Light is brightened when the projector is in stand-by mode. VOLUME BUTTONS 5 Used to adjust volume. ZOOM BUTTONS 6 Used to operate power zoom lens.
Résumé du contenu de la page N° 19
CONTROL PORT-1 CONNECTOR COMPUTER INPUT-i JACKS (BNC TYPE x 5) 16 22 Used to connect a mouse cable to the projector. Used to connect a computer to the projector. COMPUTER INPUT-2 TERMINAL (VGA CONTROL PORT-2 CONNECTOR 17 23 HDB15) Used to connect a mouse cable to the projector. Used to connect a computer to the projector. USB PORT-1 CONNECTOR MONITOR OUTPUT TERMINAL (VGA HDB15) 18 24 Used to connect a computer to the projector. Used to connect a monitor to the projector. USB
Résumé du contenu de la page N° 20
SIDE OF THE PROJECTOR (CONNECT THE VIDEO EQUIPMENT) VIDEO INPUT JACKS-1 (BNC TYPE x 3) AUDIO INPUT JACKS-2 (R and L) 28 33 Used to connect a video source to the projector. Used to connect an audio source to the projector VIDEO MONITOR OUTPUT JACKS (BNC TYPE x 3) S-VIDEO INPUT JACK-1 29 34 Permits video connection to a monitor. Used to connect a S-VHS video source to the projector. AUDIO INPUT JACKS-1 (R and L) VIDEO MONITOR (S-VIDEO) OUTPUT JACK 30 35 Used to connect an audio
