Résumé du contenu de la page N° 1
LCD
Projector
User Manual
X 20 0
MODEL LVP-X200A
1
APPENDIX ESPAÑOL FRANÇAIS ENGLISH
Résumé du contenu de la page N° 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Résumé du contenu de la page N° 3
Contents Important safeguards ...........................................................................4 Overview of the projector ......................................................................6 Overview of the remote control ............................................................8 Battery installation ............................................................................................. 9 Preparing the projector for operation ...............................................
Résumé du contenu de la page N° 4
Important safeguards PLEASE READ ALL THESE INSTRUCTIONS RE- 10. Power sources This projector should be operated only from the GARDING YOUR LCD PROJECTOR AND RETAIN type of power source indicated on the marking THEM FOR FUTURE REFERENCE. FOLLOW ALL label. If you are not sure of the type of power WARNINGS AND INSTRUCTIONS MARKED ON supplied to your office, consult your appliance THE LCD PROJECTOR. dealer or local power company. 1. Read instructions 11. Power-cord protection All the safety and op
Résumé du contenu de la page N° 5
WARNING: Unplug immediately if there is Do not turn off the main power abruptly or unplug the projector something wrong with your projector. during operation. Do not operate if smoke, strange noise or odor comes It can lead to lamp breakage, fire, electric shock or out of your projector. It might cause fire or electric other trouble. shock. In this case, unplug immediately and contact your dealer. Place of installation Never remove the cabinet. Refrain from setting the projector at any place sub
Résumé du contenu de la page N° 6
Overview of the projector lamp lid Caution: Do not replace the lamp right after using the projector. The lamp is very hot. Switch the projector to stand-by mode, wait at least 120 seconds for the lamp and LCD panel to cool. Then turn off the main power switch, unplug from the outlet and wait for another one hour or until the lamp is cool to the touch. See page 40. exhaust slits handle Hold here to carry this projector. remote control sensor (Front / Rear) release button Press to adjust t
Résumé du contenu de la page N° 7
PC card eject INPUT1 INPUT2 MAIN RGB1 IN AUDIO AUDIO OI Press to eject the PC card. See page 27. L RGB2 IN R AC IN VIDEO RGB OUT S-VIDEO RS-232C 2 RS-232C 1 LINE-OUT PC card insert slot This is where you insert the PC card. See page 27. PC audio input (stereo mini jack) PC analog RGB input (mini D-SUB 15P) Use to input PC audio signals. See pages Use to input RGB signal for PC. See pages 13 - 15. 13 - 15. video/audio input Use to input video and audio. See page 12. INPUT1 INPUT2 MAIN RGB
Résumé du contenu de la page N° 8
Overview of the remote control operation indicator When the operation button is pressed, this indicator blinks. It also illuminates when the projector is in the personal computer mode or drawing mode which is able to have a cursor operation. See pages 25, 38. cancel select This operates in the same way as the This operates in the same way as the right button on the computer mouse. left button on the computer mouse. By If this button is pressed during pressing this button during the dr
Résumé du contenu de la page N° 9
Important: • To save battery power, turn off the operation indicator by pressing the START/STOP button when not in use. • To save battery power, the operation indicator will turn off if the remote control is not operated for a period of 5 minutes. Battery installation Use two AA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to
Résumé du contenu de la page N° 10
Preparing the projector for operation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance screen between the projector and screen: Multiply the width of the screen x 1.875 ~ 1.975 (max.) , Multiply the width of the screen x 2.468 ~ 2.57 (min.) , • Refer to the chart to recom- mended distances in maximum H (height) (between the screen and center zoom and minimum zoom. L of the head o
Résumé du contenu de la page N° 11
Adjusting the angle of projection Getting ready for projection Screen on a flat wall with a 90 degree angle to the floor by adjusting two foot adjustments on the bottom of the 1. Connect the power cord provided to this projector projector. If the angle cannot be corrected by them, with the power jack of the projector. adjust the height and angle of screen. 2. Connect the power cord to the wall outlet. Plug in the provided power cord directly. ground terminal foot adjustment screen 3. Take off t
Résumé du contenu de la page N° 12
ON DIP 1 2 3 4 5 6 Basic connections This projector can be connected to equipment such as VCRs, video cameras, videodisc players, and personal comput- ers having analog RGB input. Important: • Make sure that your equipment is turned off before connection. • Match the color of video and audio plugs on the AV cable with each terminal. • Plug in firmly and unplug by holding the plug, not by pulling the cable out. • If connected units are set too close to one another, the image may be affected. Sett
Résumé du contenu de la page N° 13
Projector + IBM PC or IBM PC compatibles Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal computer is the stereo mini-jack. There are some personal computers that have different types of audio outputs or none at all. Please ask your dealer for details. • For connection details, refer to t
Résumé du contenu de la page N° 14
Basic connections (continue) Projector + Macintosh Make sure that your equipment is turned off before connection. Important: • A monitor output adapter is necessary for a Macintosh if it has no video port. Contact your dealer. • If you use the RGB conversion adapter provided, set the dip switch to the appropriate position. See page 12. • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The aud
Résumé du contenu de la page N° 15
Projector + NEC PC-98 series Make sure that your equipment is turned off before connection. Important: • Connectors or analog RGB output adapters may be necessary depending on the personal computer connected to this projector. Please contact your dealer. • The audio input for a personal computer is the stereo mini jack. There are some personal computers that have different type or no audio outputs. Please ask your dealer for details. • For connection details, refer to the owner's guide of each
Résumé du contenu de la page N° 16
To operate projector power ON Numbers 1 - 9 correspond to the instruction numbers below. 2, 9 Left side INPUT1 INPUT2 MAIN RGB1 IN AUDIO AUDIO OI L RGB2 IN R AC IN VIDEO RGB OUT S-VIDEO RS-232C 1 RS-232C 2 LINE -OUT LAMP TEMP CARD 1 CARD 2 FOCUS AUTO FINE RGB VIDEO CARD MENU /ZOOM POSITION ENTER AUTO position 3, 7, 8 4 4 6 5 button 1. Put the projector into standby mode by pressing the Important: main power switch. The POWER indicator lights up • A darkened image may be seen right after press
Résumé du contenu de la page N° 17
AUTO POSITION button Caution: When the source is selected to RGB1 or RGB2 and • When you have finished using this equipment, wait the image is not in the right place, set to display as 120 seconds for the exhaust fans to stop. Then turn blightest signal as possible, then press the AUTO off the main switch and unplug the power cable from POSITION button. If the image is still not in the the wall outlet, for safety purposes. right place. • After the lamp is turned off, the lamp cannot be • Set sc
Résumé du contenu de la page N° 18
Menu operation Basic operation Several settings can be adjusted using Menu. EXAMPLE: Brightness adjustment 7. Press the or buttons on the control panel (or 1. Press the MENU button. $ or % buttons on the remote control) to select the PinP/ PC CARD desired color R, G or B. SIGNAL PICTURE AUDIO EXPAND AUTO PLAY BRIGHTNESS 2. Press the or buttons on the control panel (or R G B 15 15 15 $ or % buttons on the remote control) to select PICTURE. PinP/ PC CARD SIGNAL PICTURE AUDIO EXPAND AUTO PLAY 8.
Résumé du contenu de la page N° 19
MENU PinP/ PC CARD SIGNAL PICTURE AUDIO INSTALLATION OPTION Ver. EXPAND AUTO PLAY or or or or or or or or Q W E R T Y U I Q SIGNAL HORIZ. VERT. AUTO FINE SYNC. TRACKING RGB/Y,CB,CR POSITION POSITION AUTO RGB USER Qa SXGA70a 0 0 0 0 Y,CB,CR ENTER MEMORIZE /STILL USER1 DELETE USER2 RESET PinP/ PC CARD SIGNAL PICTURE AUDIO INSTALLATION OPTION Ver. EXPAND AUTO PLAY AUTO .................. Use to select AUTO, USER 1 or USER 2. HORIZ. POSITION .... Use to adjust the horizontal position of the image. V
Résumé du contenu de la page N° 20
Menu operation (continue) E PinP/EXPAND This menu appears when either the display enlargement or PinP functions are used. ZOOM AUTO POSITION SIZE MODE PIP 1 1 1ON 2 OFF 2 2 3 3 3 4 4 5 PinP/ PC CARD SIGNAL PICTURE AUDIO INSTALLATION OPTION Ver. EXPAND AUTO PLAY ZOOM MODE ..... Selects the desired type of expand mode, type1, 2, 3 or 4 (Actual size display). POSITION .......... Selects the desired position of the sub image in expand or PinP mode. SIZE .................... Selects the desired size
