Résumé du contenu de la page N° 1
DCP-130C
Before you can use the machine, you must set up the hardware and install the software.
Please read this Quick Setup Guide for the correct setup procedure and installation instructions.
STEP 1
Setting Up the Machine
STEP 2
Installing the Driver & Software
Setup is Complete!
Keep this Quick Setup Guide, the User’s Guide and the supplied CD-ROM in a convenient place for
quick and easy reference at all times.
Quick Setup Guide
Résumé du contenu de la page N° 2
Symbols used in this guide Caution Improper Setup Warning Warnings tell you what to do to prevent Cautions specify procedures you must Improper Setup icons alert you to possible personal injury. follow or avoid to prevent possible devices and operations that are not damage to the machine or other objects. compatible with the machine. User’s Guide or Software User’s Guide Note Notes tell you how you should respond Indicates reference to the User’s Guide to a situation that may arise o
Résumé du contenu de la page N° 3
Table of Contents Getting Started Carton components...................................................................................................................................... 2 Control panel................................................................................................................................................ 3 STEP1 – Setting Up the Machine Removing the protective parts ...........................................................................................
Résumé du contenu de la page N° 4
Getting Started 1 Carton components Carton components may vary from one country to another. Save all packing materials and the carton in case for any reason you must ship your machine. Quick Setup Guide CD-ROM User’s Guide Power Cord Black (LC1000BK) Yellow (LC1000Y) Cyan (LC1000C) Magenta (LC1000M) Ink Cartridges A USB interface cable is not a standard accessory. Please make sure you use a USB 2.0 cable that is no longer than 2 metres long (6 feet). Your DCP has a USB interfac
Résumé du contenu de la page N° 5
Getting Started Control panel 12 11 10 9 8 7 6 4 5 1 2 3 1 Copy keys 7 Ink Management key 2OK key 8 Scan key 3 Navigation keys 9 PhotoCapture key 4 Stop/Exit key 10 Menu key 5 Start keys 11 LCD (Liquid Crystal Display) 6On/Off key 12 Warning LED For the details of the control panel, see Control panel overview in Chapter 1 of the User’s Guide. Note Current Enlarge/ Current Copy Current Number of Reduce setting Quality setting Copies setting When the machine is idle (not being used) it wil
Résumé du contenu de la page N° 6
Setting Up the Machine STEP1 1 1 Removing the protective 2 Loading paper parts 2 You can load up to 100 sheets of 80 g/m 1 Remove the protective tape and film covering (20 lb) paper. the scanner glass. For details, see Acceptable paper and other media in Chapter 2 of the User’s Guide. Improper Setup 1 Pull the paper tray completely out of the DO NOT connect the interface cable. machine and lift the output paper tray cover (1). Connecting the interface cable is done during the softw
Résumé du contenu de la page N° 7
Setting Up the Machine 3 Fan the stack of paper well to avoid paper jams 6 Close the output paper tray cover. and misfeeds. 4 Gently put the paper into the paper tray print side down and top edge first. Check that the paper is flat in the tray. 7 Slowly push the paper tray completely into the machine. 5 Gently adjust the paper side guides with both hands and the paper length guide to fit the 8 While holding the paper tray in place, pull out paper. the paper support ( ) until it cli
Résumé du contenu de la page N° 8
Setting Up the Machine STEP1 3 Connecting the power cord 4 Choosing your language 1 Connect the power cord. 1 After connecting the power cord, the LCD shows: Select language q Press OK Key Press OK. 2 Press a or b to choose your language and press OK. English e q Improper Setup DO NOT connect the interface cable. Select ab&OK Connecting the interface cable is done during the software installation process. 3 If your language is chosen, press a (Yes). English? Warning q The m
Résumé du contenu de la page N° 9
Setting Up the Machine 4 Take out the ink cartridge. 5 Installing the ink cartridges Warning If ink gets in your eyes, wash them out with water at once, and if irritation occurs consult a doctor. 1 Make sure that the power is turned on. The LCD shows: No Cartridge 2 Open the ink cartridge cover (1). 5 Carefully remove the protective yellow cap (1). 1 1 Improper Setup 3 Pull all the lock release levers down and remove the yellow protective part (1). DO NOT touch the area shown in the
Résumé du contenu de la page N° 10
Setting Up the Machine STEP1 6 Install each ink cartridge in the direction of the The machine will clean the ink tube system for arrow on the label. use for the first time. This process will occur Take care to match the colour of the lock only once, the first time ink cartridges are release lever (1) with the cartridge colour (2), installed. The cleaning process will last as shown in the diagram below. approximately four minutes. The LCD shows: Preparing System q Approx 4 Minutes 2 C
Résumé du contenu de la page N° 11
Setting Up the Machine 6 The LCD asks you if the print quality is OK for 6 Print quality check black and colour. Press a (Yes) or b (No) . Black OK? 1 After the cleaning cycle is finished, the LCD q shows: a Yes b No Set Paper and q Color OK? Press Start q 2 Make sure paper is loaded in the paper tray. a Yes b No Press Colour Start. The machine starts printing the Print Quality After pressing a (Yes) or b (No) for both black Check Sheet (only during initial ink cartridge and
Résumé du contenu de la page N° 12
Setting Up the Machine STEP1 7 Setting the LCD contrast 8 Setting the date and time You can adjust the LCD contrast for a sharper and Setting the date and time allows the machine to clean more vivid display. If you are having difficulty seeing the print head regularly and maintain optimum print the LCD from your position, we recommend the quality. It also allows the machine to name files following contrast setting for improved viewing. created when using the Scan to Card feature. 1 Press
Résumé du contenu de la page N° 13
Setting Up the Machine 9 Press Stop/Exit. Note If you want to start again, press Stop/Exit to go back to Step 1. To confirm the current date and time, print out the Users Settings Report. (See “Printing reports” in Chapter 1 of the User's Guide.) Now go to Go to Supplied CD-ROM ‘MFL-Pro Suite’ on the next page to install the drivers. 11
Résumé du contenu de la page N° 14
Supplied CD-ROM ‘MFL-Pro Suite’ 1 Supplied CD-ROM ‘MFL-Pro Suite’ ® ® Windows Macintosh Start Here OSX Install MFL-Pro Suite You can install the MFL-Pro Suite software and You can install the MFL-Pro Suite that includes the multifunction drivers. printer driver, scanner driver and the Brother ® ControlCenter2 for Mac OS 10.2.4 or greater. Install Other Drivers or Utilities Presto! PageManager You can install additional MFL-Pro Suite software ® utilities, install without PaperPort S
Résumé du contenu de la page N° 15
Installing the Driver & Software STEP2 Follow the instructions on this page for your operating system and interface. For the latest drivers and documentations and to find the best solution for your problem or question, access the Brother Solutions Center directly from the driver or visit http://solutions.brother.com ® Windows For USB Interface Users ® (For Windows 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition).... 14 ® Macintosh For USB Interface Users ® (For Mac OS X 10.2.4 or g
Résumé du contenu de la page N° 16
Installing the Driver & Software STEP2 ® Windows 1 For USB Interface Users ® (For Windows 98/98SE/Me/2000 Professional/XP/XP Professional x64 Edition) 4 The CD-ROM main menu will appear. Click Important Install MFL-Pro Suite. Make sure that you have finished the instructions from Step 1 Setting Up the Machine on pages 4-11. Note • Please close any applications running before installing MFL-Pro Suite. • Make sure there are no memory cards in the media drive of the machine. 1 Disconne
Résumé du contenu de la page N° 17
Installing the Driver & Software ® Windows ® 5 After reading and accepting the ScanSoft 10 Using both hands, use the plastic tabs on both ® PaperPort SE License Agreement, click Yes. sides of the machine to lift the scanner cover until it locks securely into the open position. ® 6 The installation of PaperPort SE will automatically start and is followed by the 11 Connect the USB cable to the USB socket installation of MFL-Pro Suite. marked with a symbol. You will find the USB socket i
Résumé du contenu de la page N° 18
Installing the Driver & Software STEP2 ® Windows 13 Lift the scanner cover to release the lock ( ). 16 Click Finish to restart your computer. ® Gently push the scanner cover support down (After restarting the computer, for Windows 2000 Professional/XP/XP Professional x64 ( ) and close the scanner cover ( ). Edition, you must be logged on with Administrator rights.) Note After restarting the computer, the Installation 14 Turn on the machine by connecting the power Diagnostics will run
Résumé du contenu de la page N° 19
Installing the Driver & Software ® Macintosh For USB Interface Users ® (For Mac OS X 10.2.4 or greater) 3 Carefully guide the USB cable into the trench Important as shown below, following the trench around Make sure that you have finished the and toward the back of the machine. instructions from Step 1 Setting Up the Machine on pages 4-11. Note ® For Mac OS X 10.2.0 to 10.2.3 users, upgrade to ® Mac OS X 10.2.4 or greater. (For the latest ® information for Mac OS X, visit http://soluti
Résumé du contenu de la page N° 20
Installing the Driver & Software STEP2 ® Macintosh ® 5 Turn on your Macintosh . 11 Choose USB. 6 Put the supplied CD-ROM into your CD-ROM drive. 7 Double-click the Start Here OSX icon to install. Follow the on-screen instructions 12 Choose DCP-XXXX (where XXXX is your model name), and then click Add. Note Please wait, it will take a few seconds for the software to install. After the installation, the 13 Click Print Center, then Quit Print Center. computer will restart automatically.
