Instruction d'utilisation Lexmark X85X

Résumé du contenu de la page N° 1

4 Flex the sheets back and forth to loosen them,
Loading the multipurpose feeder
Lexmark™ X85x
then fan them. Do not fold or crease the print
1 Lower the multipurpose feeder.
media. Straighten the edges on a level surface.
Quick Reference
Loading paper and
specialty media
5 Load print media in the tray with the print side
up.
Loading standard or optional 500-
sheet trays
2 Pull the tray extension out.
1 Pull out the tray.
Note: Do not place objects on the
multipurpose feeder. Also, avoid
p

Résumé du contenu de la page N° 2

Note: Make sure the print media is below 1 Pull out the tray. 4 Load print media in the tray with the print side the max fill line. Overloading may up. cause jams. 2 Squeeze the front guide tab, and slide the guide to the correct position for the size media you are Note: Make sure the print media is below loading. the max fill line on the rear guide. 6 Slide the width guides until they lightly rest Overloading may cause jams. against the edge of the media. 5 Insert the tray into the MFP. Lo

Résumé du contenu de la page N° 3

� � 3 Flex the sheets back and forth to loosen them, 3 Touch Copy on the home screen. Copying using the ADF then fan them. Do not fold or crease the print 4 Touch Copy from:, and then identify the size of 1 Place the original document faceup in the media. Straighten the edges on a level surface. your original document. automatic document feeder. For example, Legal. 2 Adjust the paper guides when using the ADF. 3 Touch Copy on the home screen, or use the 5 Touch Copy to:, and then select the s

Résumé du contenu de la page N° 4

1 Place your original document in the ADF face For example, if you have four portrait-oriented 4 Modify the printer settings as appropriate (such up. Labels on the ADF show how to load the original documents that you want copied to the as the pages you want to print or the number of paper based on its size. same side of one sheet, touch 4 on 1 Portrait. copies). 2 Adjust the paper guides. 8 Touch Print Page Borders if you want a box Note: Click Properties or Setup to adjust drawn around each

Résumé du contenu de la page N° 5

Printing from a USB flash memory Maintaining the printer device 1 Make sure the MFP is on and Ready or Busy Cleaning the scanner glass appears. 1 Open the document cover. 2 Insert a USB flash memory device into the USB 2 Dampen a clean, lint-free cloth or cotton swab Direct interface. with isopropyl alcohol (95%). 3 Wipe the flatbed and backing material by moving the cloth or swab from side to side. Backing material Flatbed 4 Close the document cover. Note: If you insert the memory device