Résumé du contenu de la page N° 1
X651de, X652de, X654de, X656de,
X656dte, X658d, X658de, X658dme,
X658dfe, X658dte, X658dtme,
X658dtfe
Maintenance Guide
July 2008 www.lexmark.com
Résumé du contenu de la page N° 2
Contents Maintaining the printer................................................................................3 Cleaning the exterior of the printer..........................................................................................................3 Cleaning the scanner glass........................................................................................................................3 Adjusting scanner registration................................................................
Résumé du contenu de la page N° 3
Maintaining the printer Periodically, certain tasks are required to maintain optimum print quality. Cleaning the exterior of the printer 1 Make sure that the printer is turned off and unplugged from the wall outlet. CAUTION—SHOCK HAZARD: To avoid the risk of electric shock when cleaning the exterior of the printer, unplug the power cord from the wall outlet and disconnect all cables to the printer before proceeding. 2 Remove paper from the standard exit bin. 3 Dampen a clean, lint‑free cloth wi
Résumé du contenu de la page N° 4
4 Wipe the white underside of the scanner cover until it is clean and dry. 5 Open the bottom ADF door. 6 Wipe the ADF scanner glass under the ADF door. 7 Close the bottom ADF door. 8 Wipe the scanner glass (flatbed) and backing material by moving the cloth or paper towel from side to side. 9 Close the scanner cover. Adjusting scanner registration Scanner Registration is a process to align the scan area with the paper location. To manually adjust the scanner registration: 1 Turn the printer off.
Résumé du contenu de la page N° 5
To align the scanner glass (flatbed): a Place the Quick Test page facedown on the scanner glass. b Touch Copy Quick Test. The scanner prints a copy of the Quick Test page. c Touch Flatbed. d Use the copy of the Quick Test page to adjust the Left Margin and Top Margin settings. e Touch Submit. f Touch Copy Quick Test and compare the new copy to the original. Repeat the flatbed alignment steps until the position on the page of the Quick Test copy closely matches the original. To align the ADF: a
Résumé du contenu de la page N° 6
Do not expose supplies to: • Direct sunlight • Temperatures above 35°C (95°F) • High humidity above 80% • Salty air • Corrosive gases • Heavy dust Conserving supplies There are some settings you can change from the printer control panel that will help you conserve toner and paper. For more information, see “Supplies menu,” “Quality menu,” and “Finishing menu.” If you need to print several copies, you can conserve supplies by printing the first copy and checking it for accuracy before printing
Résumé du contenu de la page N° 7
Ordering supplies To order supplies in the U.S., contact Lexmark at 1-800-539-6275 for information about Lexmark authorized supplies dealers in your area. In other countries or regions, visit the Lexmark Web Site at www.lexmark.com or contact the place where you purchased the printer. Note: All life estimates for printer supplies assume printing on letter‑ or A4‑size plain paper. Ordering print cartridges When 88 Cartridge low appears or when the print becomes faded: 1 Remove the print cartrid
Résumé du contenu de la page N° 8
Part name Lexmark Return Program Regular cartridge Cartridge High Yield Print Cartridge X651H21P X651H11P Extra High Yield Print Cartridge X654X21P X654X11P High Yield Return Program Print Cartridge for Label Applications X651H04P Not applicable Extra High Yield Return Program Print Cartridge for Label Applications X654X04P Not applicable For Latin America Print cartridge X651A21L X651A11L High Yield Print Cartridge X651H21L X651H11L Extra High Yield Print Cartridge X654X21L X654X11L High Yield
Résumé du contenu de la page N° 9
Ordering a fuser To check the fuser type (T1 or T2) installed in the printer, remove the print cartridge to view the label on the fuser. Part name Part number T1 fuser 40X1870 (100 V) 40X4418 (110 V) 40X1871 (220 V) T2 fuser 40X5853 (100 V) 40X5854 (110 V) 40X5855 (220 V) Ordering an ADF maintenance kit The ADF maintenance kit contains all the items necessary to replace the ADF pick mechanism and the ADF separator roller. See the following table for the maintenance kit part number for your spec
Résumé du contenu de la page N° 10
Ordering ADF replacement parts Order ADF replacement parts if you experience problems with paper double-feeding or failing to feed through the automatic document feeder. Part name Part number ADF pick assembly 3017345 ADF separator roll 3017348 Ordering staple cartridges When Staples Low or Staples Empty appears, order the specified staple cartridge. For more information, see the illustrations inside the stapler door. Part name Part number Staple Cartridges–3 pack 25A0013 Recycling Lexmark prod
Résumé du contenu de la page N° 11
CAUTION—POTENTIAL INJURY: Before moving the printer, follow these guidelines to avoid personal injury or printer damage: • Turn the printer off using the power switch, and then unplug the power cord from the wall outlet. • Disconnect all cords and cables from the printer before moving it. • Lift the printer off of the optional drawer and set it aside instead of trying to lift the drawer and printer at the same time. Notes: – Remove all printer options before moving the printer. – Use the hand
Résumé du contenu de la page N° 12
1 Right Side 20 cm (8 in.) 2 Left Side 31 cm (12 in.) 3 Front 51 cm (20 in.) 4 Rear 20 cm (8 in.) 5 Top 31 cm (12 in.) Shipping the printer When shipping the printer, use the original packaging or call the place of purchase for a relocation kit. Maintaining the printer 12
