Résumé du contenu de la page N° 1
IBM Infoprint M22 MFP Option IBM
Setup Guide
S510-2633-00
Résumé du contenu de la page N° 2
Résumé du contenu de la page N° 3
IBM Infoprint M22 MFP Option IBM Setup Guide S510-2633-00
Résumé du contenu de la page N° 4
Edition: January 2003 Safety information MarkVision is a trademark of Lexmark International, Inc., Always follow all safety precautions when installing or using registered in the United States and/or other countries. telephone equipment to reduce the risk of fire, electric shock and injury to persons, including the following: Other trademarks are the property of their respective owners. © 2003 Lexmark International, Inc. • If your product is not marked with this symbol , it must be All rights
Résumé du contenu de la page N° 5
Contents Step 1: Get started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Step 2: Assemble paper handling options . . . . . . . . . . . . . 4 Step 3: Set up the printer . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Step 4: Install the scanner . . . . . . . . . . . . . . . . . . . . . . . . . 23 Step 5: Install the feed tray and paper stop . . . . . . . . . . . 24 Step 6: Attach cables and power cords . . . . . . . . . . . . . . . 26 Step 7: Turn on the scan
Résumé du contenu de la page N° 6
Solve setup problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Maintain your scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 Contents iv
Résumé du contenu de la page N° 7
Step 1: Get started Using this book This book helps you set up your printer and scanner (MFP option). If you do not have an option listed here, you can skip that portion of the setup guide and continue to the next task. If you need more information to assemble an option or your printer, refer to the documentation that came with the option or your printer and then return to this guide and continue setup. If you encounter a problem while setting up the printer, see “Solve setup problems” on pag
Résumé du contenu de la page N° 8
Selecting a location for your printer and MFP When selecting a location for your printer and MFP option, you must leave enough room to open the printer trays, covers, doors, and MFP Width option. It is also important to: • Allow space around the printer for proper ventilation • Provide a firm, level, and stable surface Height • Keep the equipment away from the direct airflow of air conditioners, heaters, or ventilators • Keep the equipment free of sunlight, humidity extremes, or temperatur
Résumé du contenu de la page N° 9
Customizing your You can customize your MFP with various input and memory options. MFP option The printer base provides stability when configuring the printer plus input options. Configurations are limited to: 1) three 250-sheet drawers, 2) three 500-sheet drawers or any combination of three drawers, 3) a 2000-sheet drawer, 4) a 2000-sheet drawer and two 250-sheet drawers, or 5) a 2000-sheet drawer and a 500-sheet drawer. Any of the listed configurations can include a duplex unit. Note: Leav
Résumé du contenu de la page N° 10
Step 2: Assemble paper handling options CAUTION: If you are using If you purchased a printer stand, follow the assembly instructions a 2000-sheet drawer, a provided with the stand, and then return to Step 2: “Assemble paper duplex unit with one or more handling options” in this book. input drawers, or more than The caster base is used when placing your MFP on the floor. It one 500-sheet drawer, you provides mobility and a stable platform for your MFP. There are must use either a printer d
Résumé du contenu de la page N° 11
5 Place power adapter bracket (1) aside for later use. The other power adapter bracket is not used with this scanner and can be discarded. Note: Be sure to set up the Use the following table to locate the instructions you need to set up items in the order listed in your printer and the paper handling options you purchased. the table. Topic Go to page... Attaching the caster base to the 2000-sheet drawer 5 Assembling the caster base for the 500 or 250-sheet 8 drawer Installing the duplex unit
Résumé du contenu de la page N° 12
4 Turn the 2000-sheet drawer over so the bottom side is up. Drawer bottom 5 Remove the four screws and rubber feet from the bottom of the 2000-sheet drawer. 6 Place the caster cover on the bottom of the 2000-sheet drawer. 7 Place the frame assembly inside the caster cover. Front Assemble paper handling options 6
Résumé du contenu de la page N° 13
8 Insert the two long machine screws from the caster base hardware bag through the screw holes of the frame assembly and the caster cover, and then into the holes in the bottom of the 2000-sheet drawer. Each screw goes through a lock washer, then a flat washer, then through the frame assembly and cover. 9 Tighten the screws. CAUTION: The caster and 2000-sheet drawer weighs 22.2 kg (49 lb) and requires at least two people to lift it safely. 10 Have someone help you lift and turn the assembled 200
Résumé du contenu de la page N° 14
Installing screws 1 Insert two short stabilizer screws (2) into the pockets of the 2000-sheet drawer. in the 2000-sheet 2 Tighten the screws securely. drawer 3 If you have a duplex unit, go to “Installing the duplex unit” on page 11 otherwise, go to “Positioning the printer” on page 12. Assembling the 1 Remove the caster cover, screws, and frame assembly from the caster box, and place the bag of screws aside for later use. caster base for the 2 Place the frame assembly on the floor. 500 or
Résumé du contenu de la page N° 15
Installing screws 1 Remove a 500-sheet drawer from the carton. in the 500-sheet 2 Remove all packing material and tape from the drawer and paper tray. drawer and caster base 3 If you are using a table or printer stand, then place the 500- sheet drawer in that location and go to step 8, otherwise continue to step 4. 4 Use a flat tip screwdriver to remove the rubber feet from the bottom of the 500-sheet drawer. Drawer bottom 5 Place the drawer on the caster base. 6 Insert two long stabilizer
Résumé du contenu de la page N° 16
Installing 1 Remove a 500-sheet drawer from the carton. additional 500- 2 Remove all packing material and tape from the drawer and paper tray. sheet drawers 3 Use a flat tip screwdriver to remove the rubber feet from the bottom of the 500-sheet drawer. 4 Place the drawer on top of the previously installed drawer. Make sure they lock together securely. 5 Insert two long stabilizer screws (1) into the pockets of the 500- sheet drawer. The screws go through the drawer and into the top of the scr
Résumé du contenu de la page N° 17
5 Place the drawer on top of the previously installed drawer or caster base. 6 Insert two short stabilizer screws (2) into the pockets of the 250-sheet drawer. The screws go through the drawer and into the top of the screws of the previously installed drawer or into the caster frame assembly. 7 Tighten the screws securely. Installing the 1 Remove the duplex unit from the carton. duplex unit 2 Remove all packing material and tape. 3 If you are using a table or printer stand, then place the du
Résumé du contenu de la page N° 18
5 Place the duplex unit on top of any installed drawers. If you are not using a caster base, place the duplex unit on a table or optional printer stand and go to “Positioning the printer.” 6 Make sure the drawers and duplex unit lock together securely. 7 Insert two long stabilizer posts (3) into the pockets of the duplex unit. The posts go through the duplex unit and into the top of the screws of the previously installed drawer. 8 Tighten the posts securely. Positioning the 1 Open the printe
Résumé du contenu de la page N° 19
8 Complete steps a and b if your configuration does not include a duplex unit. a Insert the two short stabilizer posts (4) into the top of the stabilizer screws that were previously installed in the optional drawer. b Tighten the posts securely. CAUTION: The printer weighs 20.4 kg (45 lb) and requires at least two people to lift it safely. 9 Lower the printer onto the duplex unit, optional drawer, table, or printer cabinet. 10 Make sure the printer and duplex unit lock together securely. 1
Résumé du contenu de la page N° 20
Installing printer 1 Press the release latches to open the upper and lower front doors. memory and 2 Press down on the side door latches and open the side door. network options Removing the shield 1 Loosen, but do not remove, the six screws on the shield. 2 Lift the shield up and off the printer. 3 Locate the connectors you want to use. Memory connectors Option card connectors Firmware connectors Assemble paper handling options 14
