Instruction d'utilisation Fujitsu FTP-604 FTP-644MCL001

Résumé du contenu de la page N° 1

BATTERY DRIVE, FTP-604 Series
4” TYPE MECHANISM AND INTERFACE BOARD
FTP-644MCL001/002/FTP-624DCL/DSL
n OVERVIEW
FTP-644MCL/FTP-624DCL/DSL Series is a high speed line
thermal printer driven by battery, printing on 4-inch wide paper
(112 mm/ 114 mm).
The printer is compact and lightweight, and the design allows
easy head maintenance, head cleaning and head replacement.
This printer is suitable for a variety of applications, such as hand
held terminals, POS terminals, ticket machines, coupon
machi

Résumé du contenu de la page N° 2

FTP-644MCL001/002/FTP-624DCL/DSL002 n DESIGNATION Item Part number 1 Printer mechanism FTP-644MCL001/002* 2 Centronics FTP-624DCL002* Interface Board 3 RS-232C FTP-624DSL002* LSI Micro Controller Unit FTP-624CU102 Thermal head cables FTP-624Y002, FTP-624Y003 Parallel interface cable FTP-441Y201 Cables Serial interface cable FTP-624Y301 Power cable (logic, head and motor) FTP-621Y401, FTP-621Y601 *1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path).

Résumé du contenu de la page N° 3

FTP-644MCL001/002/FTP-624DCL/DSL002 (Continued) Item Specifications Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) For head Peak current: approx. 3.5 A (conditions: room temp., 7.2VDC, 128 dots on) Power Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) supply For motor Peak current: approx. 0.8 A (conditions: room temp., 7.2 VDC) Voltage: 5 VDC ± 5% For logic Current: 0.2 A maximum Mechanism 138 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter) Dimensi

Résumé du contenu de la page N° 4

2-MOUNTING HOLE FTP-644MCL001/002/FTP-624DCL/DSL002 n DIMENSIONS Printer mechanism PAPER INSERTION (MCLOO1) 20.1 HEAD UP LEVER (AT HEAD DOWN) CENTER OF PAPER PAPER INSERTION (MCLOO2) HEAD CONNECTOR ±1 65.771.8 (137.5) Unit: mm 4 45.5 1.5 (150) (7.5)

Résumé du contenu de la page N° 5

FTP-644MCL001/002/FTP-624DCL/DSL002 Interface board 130.8 120.7 105.4 71.1 33.0 5.1 15.2 5.1 CN5 CN12 CN9 CN10 CN11 CN1 CN2 CN4 59.7 5.1 5.1 73.7 4-03.6 86.4 105.4 114.2 120.7 Mounting Height Mounting Height * CN9 on FTP-624DSL only Unit: mm ** CN8, CN11, CN12 not used n FUNCTION ITEM ITEM 1. Test printing 8. Motor power save 2. Paper-out detection 9. Mark detection 3. Paper near end detection 10. MCU trouble detection 4. Head-up detection 11. Power on/off sequence protection 5. Abnormal temp. o

Résumé du contenu de la page N° 6

FTP-644MCL001/002/FTP-624DCL/DSL002 n CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM 1. Thermal Head Head side 1 : B11B-PH-K-S-2.2 (J.S.T.) or equivalent 2: B10B-PH-K-S-2.2 (J.S.T.) or equivalent Board side 1: PHR-11 (J.S.T.) or equivalent 2: PHR-12 (J.S.T.) or equivalent Connector Thermal Head 1 Connector Thermal Head 2 Nlo.St ignaCommen Nl o.St ignaCommen 15S5 TBPrintenablesignal 1HVdPowerforhea 26S6 TBPrintenablesignal 2HVdPowerforhea 37S7 TBPrintenablesi

Résumé du contenu de la page N° 7

FTP-644MCL001/002/FTP-624DCL/DSL002 Japan Europe Fujitsu Component Limited Fujitsu Components Europe B.V. Diamantlaan 25 Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku 2132 WV Hoofddorp Netherlands Tokyo 141, Japan Fujitsu Components Tel: (81-3) 5449-7010 Tel: (31-23) 5560910 International Fax: (81-3) 5449-2626 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Email: promothq@ft.ed.fujitsu.com Headquarter Web: www.fcl.fujitsu.com Web: www.fceu.fujitsu.com Offices North and South