Résumé du contenu de la page N° 1
Important User Information
Thank you for purchasing LG Variable Frequency Drives!
SAFETY INSTRUCTIONS
Always follow safety instructions to prevent accidents and potential hazards from occurring.
In this manual, safety messages are classified as follows:
Improper operation may result in serious personal injury or death.
WARNING
Improper operation may result in slight to medium personal injury
CAUTION or property damage.
Throughout this manual we use the followi
Résumé du contenu de la page N° 2
Important User Information pinching. Otherwise, you may get an electric shock. CAUTION Install the inverter on a non-flammable surface. Do not place flammable material nearby. Otherwise, fire could occur. Disconnect the input power if the inverter gets damaged. Otherwise, it could result in a secondary accident and fire. After the input power is applied or removed, the inverter will remain hot for a couple of minutes. Otherwise, you may get bodily injuries such
Résumé du contenu de la page N° 3
Important User Information (2) Wiring Do not connect a power factor correction capacitor, surge suppressor, or RFI filter to the output of the inverter. The connection orientation of the output cables U, V, W to the motor will affect the direction of rotation of the motor. Incorrect terminal wiring could result in the equipment damage. Reversing the polarity (+/-) of the terminals could damage the inverter. Only authorized personnel familiar with LG inverter should perform wiri
Résumé du contenu de la page N° 4
Manual outline Important User Information The purpose of this manual is to provide the user with the necessary information to install, program, start up and maintain the SV-iC5 series inverter. To assure successful installation and operation, the material presented must be thoroughly read and understood before proceeding. This manual contains… Chapter Title Description 1 Basic information Provides general information and precautions for safe and & precautions optimum use
Résumé du contenu de la page N° 5
Table of Contents Table of Contents 1. Basic information and precautions..................................................................... 1-1 1.1 Important precautions..................................................................................................... 1-1 1.2 Product Details............................................................................................................... 1-2 1.3 Removal and reinstallation ............................................
Résumé du contenu de la page N° 6
Table of Contents 8. Control block diagram ........................................................................................8-1 8.1 Frequency and Drive mode setting.....................................................................................8-2 8.2 Accel/Decel setting and V/F control....................................................................................8-3 9. Basic Functions ...................................................................................
Résumé du contenu de la page N° 7
Table of Contents 12. Protective functions ...................................................................................... 12-1 12.1 Electronic Thermal ......................................................................................................12-1 12.2 Overload Warning and trip............................................................................................12-2 12.3 Stall prevention ..........................................................................
Résumé du contenu de la page N° 8
Table of Contents viii SV-iC5
Résumé du contenu de la page N° 9
1. Basic information & precautions 1. Basic information and precautions 1.1 Important precautions Unpacking and Inspect the inverter for any damage that may have occurred during shipping. To verify the inspection inverter unit is the correct one for the application you need, check the inverter type, output ratings on the nameplate and the inverter is intact. Inverter Type Input power Rating Output Power Rating Inverter Capacity (HP/kW) Bar Code Serial Number Type of the in
Résumé du contenu de la page N° 10
1. Basic information & precautions 1.2 Product Details 1.2.1 Appearance Keypad Status LED Potentiometer Display Window STOP/RST Front Cover: Button Remove it when wiring and changing Body slot: When front parameter setting. cover is pulled back till this line and lifted up, it Bottom Cover: can be removed from Remove it when main body. See Page 1-3 wiring input power and motor. Inverter Nameplate 1.2.2 View without the front cover Re
Résumé du contenu de la page N° 11
1. Basic information & precautions 1.3 Removal and reinstallation 1.3.1 Removal of the front cover To change parameter setting: Press the pattern with a finger slightly as 1) and push it downward as 2). Then 4-way button will appear. Use this button for parameter setting and changing the value. 1) 2) Side slot 1. Press here gently 4-Way Button 2. Push it down Removal for wiring: The method is the same as shown in 1. Hold both sides of the cover a
Résumé du contenu de la page N° 12
1. Basic information & precautions Removal for wiring input power and terminals: After removing the front cover, lift the bottom cover up to disconnect. : Input Power Terminals name is labeled here. To access control terminals: after finishing power terminal wiring, reinstall the bottom cover and then start wiring control terminals. Note : Use the recommended size of the cable as indicated in this manual ONLY. Using larger size cable may lead
Résumé du contenu de la page N° 13
2. Installation 2. Installation 2.1 Installation precautions CAUTION Handle the inverter with care to prevent damage to the plastic components. Do not hold the inverter by the front cover. It may fall off. 2 Install the inverter in a place where it is immune to vibration (5.9 m/s or less). The inverter is under great influence of ambient temperature. Install in a location where temperature is within the permissible range (-10~50 °C). Maximum Surrounding Air Temperature is 50°C.
Résumé du contenu de la page N° 14
2. Installation When two or more inverters are installed or a ventilation fan is mounted in inverter panel, the inverters and ventilation fan must be installed in proper positions with extreme care taken to keep the ambient temperature of the inverters below the permissible value. If they are installed in improper positions, the ambient temperature of the inverters will rise and ventilation effect will be reduced. Install the inverter using screws or bolts to insure the inverter is f
Résumé du contenu de la page N° 15
2. Installation 2.2 Dimensions 0.4, 0.75 kW (1/2~1 HP) W H D Dimension 004iC5-1 004iC5-1F 008iC5-1 008iC5-1F W 79 79 79 79 H 143 143 143 143 D 143 143 143 143 Weight 0.87 0.95 0.89 0.97 (Kg) 2-3 SV-iC5
Résumé du contenu de la page N° 16
2. Installation 1.5, 2.2 kW (2~3HP) W H D Dimension 015iC5-1 015iC5-1F 022iC5-1 022iC5-1F W 156 156 156 156 H 143 143 143 143 D 143 143 143 143 Weight 1.79 1.94 1.85 2 (Kg) 2-4 SV-iC5
Résumé du contenu de la page N° 17
3. Wiring 3. Wiring 3.1 Terminal wiring P4 P5 VR V1 CM I 30A 30B 30C MO EXTG P24 P1 P2 CM P3 Termi- Features nal FX : Forward run P1 RX : Reverse run P2 Multi- BX : Emergency stop function P3 input JOG : Jog operation terminal P4 RST : Fault reset P5 24V power for P1-P5 P24 12V power supply for potentiometer VR 0-10V Analog Input terminal V1 0-20mA Analog Input terminal I CM Common Terminal for P1-P5, AM, P24 AM Multi-function Analog out
Résumé du contenu de la page N° 18
3. Wiring 3.2 Specifications for power terminal block wiring SV004iC5-1 SV008iC5-1 SV015iC5-1 SV022iC5-1 L1 L2 P P1 N L1 L2 P P1 N U V W U V W 2 2 2 2 Input wire size 2mm 2mm 3.5mm 3.5mm 2 2 2 2 Output wire 2mm 2mm 3.5mm 3.5mm 2 2 2 2 Ground Wire 2mm 2mm 3.5mm 3.5mm 2 2 2 2 Terminal Lug 2mm ,3.5 2mm ,3.5 3.5mm ,3.5 3.5mm ,3.5 Tightening 13kgf cm 13kgf cm 15kgf cm 15kgf cm Torque CAUTION Make sure the input power is off before wiring. Wh
Résumé du contenu de la page N° 19
3. Wiring WARNING Use the Type 3 grounding method (Ground impedance: Below 100ohm). Use the dedicated ground terminal to ground the inverter. Do not use the screw in the case or chassis, etc for grounding. Dedicated Ground Dedicated Ground Terminal Terminal Note : Remove front and bottom cover before starting grounding. Caution : Follow the specifications below when grounding the inverter. Model 004iC5, 008iC5 – 1,1F 015iC5, 022iC5
Résumé du contenu de la page N° 20
3. Wiring 3.3 I/O terminal block specification Terminal Terminal Description Wire size Torque (Nm) Note 2 P1/P2/P3 Multi-function input T/M P1-P5 22 AWG, 0.3 mm 0.4 P4/P5 2 CM Common Terminal for P1-P5, 22 AWG, 0.3 mm 0.4 AM, P24 2 VR 12V power supply for external 22 AWG, 0.3 mm 0.4 potentiometer 2 V1 0-10V Analog Voltage input 22 AWG, 0.3 mm 0.4 2 I 0-20mA Analog Current input 22 AWG, 0.3 mm 0.4 2 AM Multi-function Analog output 22 AWG, 0.3 mm 0.4 2 MO Mu
