Résumé du contenu de la page N° 1
HP UPS R7000
User Guide
Abstract
This document includes installation, configuration, and operation information for the HP UPS R7000. This document isp f eroso r tnh wh e o installs and
maintains power products. HP assumes you are qualified in the servicing o-fv h oltia gh ge equipment and trained in recognizing hazards in products
with hazardous energy levels .
Part Number: 637908-003
February 2013
Edition: 3
Résumé du contenu de la page N° 2
© Copyright 2011, 2013 Hewlet -Ptackard Development Company, L.P . The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an ad w diatirorn aa nlty. HP shal l not be liable for technical or editorial errors or omissions contained h erein. Microsoft®, Windows®, Windows Vista®, and Windows Serve
Résumé du contenu de la page N° 3
Contents Overview ..................................................................................................................................... 6 UPS R7000 overview ................................................................................................................................. 6 UPS R7000 feature ......................................................................................................................... s 6 Important safety information ................
Résumé du contenu de la page N° 4
Operate mode .............................................................................................................................. 31 Auto-Bypass mode ......................................................................................................................... 31 Configuring the UPS ................................................................................................................................ 32 Changing the language.....................................
Résumé du contenu de la page N° 5
Minimum battery runtime .......................................................................................................................... 52 Environmental specifications ..................................................................................................................... 53 REPO port specifications .......................................................................................................................... 53 Spares .....................................
Résumé du contenu de la page N° 6
Overview UPS R7000 overview The HP UPS R7000 features a 4U rackmount design and offers power protection for loads up to 7200 VA/7200 W (NA/JPN) or 6500 VA/6500 W (IN TL). UPS R7000 features Features include: • 4U UPS height, 3U ERM heig ht • ERM technology that uses advanced battery management to increase battery service life, optimize recharge time, and provide a warning before the end of useful batte ry life • Extended runtime with up to four ERMs per U PS • Easily replaceable batter
Résumé du contenu de la page N° 7
Component identification UPS front pane l Item Description LCD display 1 Control buttons 2 Battery compartment 3 UPS front panel controls Item Component Description ESC button Cancel/return to the previous menu 1 Component identification 7
Résumé du contenu de la page N° 8
Item Component Description Up arrow Scroll through the menu structure 2 Down arrow Scroll through the menu structure 3 Enter/Select button Select an option 4 Power ON/OFF 5 • Green—operating button • Flashing green—on/off/standby UPS rear pane l Item Description Load segment 1 circuit breaker (controls L -36 0R 1 receptacle for NA/JPN, Item 3) Load segment 2 circuit breaker (controls L -36 0R 2 receptacle for NA/JPN, Item 15) Large output NEMA L6 -30R receptacle (NA
Résumé du contenu de la page N° 9
Item Description Load segment 2 (3) C19 receptac les 13 Load segment 2 circuit breaker (controls the C19 14 receptacles, but does not control the large output receptacle) Large output NEMA L6 -30R receptacle (NA/JPN) or 15 IEC-320-C19A receptacle (INTL) associated with load segment 2 ERM communication port 16 ERM connector for the large plug on the split ERM c able 17 REPO port The UPS includes an isolated REPO port. When properly wired, the REPO feature enables the power at
Résumé du contenu de la page N° 10
ERM rear pane l Item Description ERM input connector for the small plug on the split ERM 1 cable of another ERM outp ut ERM input connector for the large plug on the split ERM 2 cable of another ERM outp ut Split ERM cable with two output connectors that attach to 3 the UPS or another ERM Ground bonding screw 4 Component identification 10
Résumé du contenu de la page N° 11
Installation and configuration Precautions Save these instructions. This document contains important safety instructions that should be followed during installation, operation, and maintenance of the UPS and batter ies. WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The installation of options and routine maintenance and service of this product must be performed by individuals who are knowledgeable about the procedures, precautions, and ha
Résumé du contenu de la page N° 12
• Hex nuts • Cage nuts • Cage nu-tfitting tool Selecting a site WARNING: To prevent fire or electric shock, install the unit in a temp-e an ratd ure humidity-controlled indoor environment, free of conductive contaminants . When selecting a site, consider the following fact ors: • Elevated operating ambient temperatur— e If the equipment is installed in a closed or m unuiltt r i- ack assembly, the operating ambient temperature of the rack environment might be greater than room
Résumé du contenu de la page N° 13
WARNING: To reduce the risk of personal injury or damage to the equipment, be s ure that: • The leveling feet are extended to the flo or. • The full weight of the rack rests on the lev elfeet ing. • The stabilizing feet are attached to the rack if it is a si rancgk i le-nstallation. • The racks are coupled together in multi-pl raeck installations. • Only one component is extended at a time. A rack may become unstable if more than one component is extended for any reason. NOTE:
Résumé du contenu de la page N° 14
3. Install clip nuts into the rear of the r ack. 4. Insert screws through the mounting rail into the clip nu ts. Installation and configuration 14
Résumé du contenu de la page N° 15
5. Install the rail reinforcement plates and tighten using hex nuts with captive washerds i ednc iln t u he kit, instead of the nuts included with the r ail. 6. Tighten the wing nuts or hex nu ts. Installation and configuration 15
Résumé du contenu de la page N° 16
7. Install the rear mounting brackets using hex nuts. Wait until the unit is installed and the brackets are adjusted before tightening the nu ts. Preparing the rails for integrated shippi ng If the unit is to be shipped in an HP 9000 or 10000 serie s rack: 1. Remove the hex nuts, flat washers, and lock washers from the mountin g rail. 2. Install the rail reinforcement plates and tighten using the hex nuts with captive washers included in the kit, instead of the nuts included with the r a
Résumé du contenu de la page N° 17
Installing the UPS Before installing the UPS, review and observe all warningsPre inc "autions (on page 11)." WARNING: A risk of personal injury or damage to the equipment exists. Uneven loading of equipment in the rack might cause the rack to become unstable. Install the heavier components first, and then continue to populate the rack from the bottom to the top. 1. Install the mounting rai l(" s Installing the mounting rail" o s n page 12 ). 2. With one person on each side of the
Résumé du contenu de la page N° 18
Attaching the UPS front bezel Connecting the serial communications por t CAUTION: Use only the computer interface cable supplied with the UPS to connect the communications port to the host comput er. IMPORTANT: Power protector software requires the communications port to be appropriately cabled to the host compute r. Installation and configuration 18
Résumé du contenu de la page N° 19
Configuring a USB to serial converter ® ® NOTE: This procedure was tested on the Windo w XPs Professional, Windows Server 2003, ® and Windows Vista Enterprise operating systems using the HP USB to serial converter (part number 3040980 - 01). Depending on your system configuration, a driver download might be required to successfully install the converter. The driver can be downloaded from th-D e riUSB vers website (http://www.usb-drivers.com/drivers/123/123294.htm). To conf
Résumé du contenu de la page N° 20
o Bits per second: 9600 o Data Bits: 8 o Parity: None o Stop bits: 1 o Flow control: None 9. Click Advanced. The Advanced Settings screen appea rs. 10. From the COM Port Number drop down menu, seCleom ct 1 for the USB port number, and then click OK. If COM 1 is being used by another USB port, the following message ap pears: This COM name is being used by another device. Using duplicate names can lead to inaccessible devices and changed settings. Do you want to continue? If this messa
