Résumé du contenu de la page N° 1
WS-7394U-IT
Wireless 915 MHz
Wireless Weather Station
Instruction Manual
Résumé du contenu de la page N° 2
TABLE OF CONTENTS Topic Page Inventory of Contents/ Additional Equipment 3 About WWVB 3 Quick Set Up Guide 4 Detailed Set Up Guide Battery Installation 5 Start Up Sequence 6 Explanation of LCD Information 7 Function Key Layout 8 Program Mode Overview of Programming Sequence 8 LCD Contrast Setting 8 Time Zone Setting 9 DST ON/OFF Setting 9 Radio-controlled Time ON/OFF Setting 9-10 12/24-hour Time Mode Setting 10
Résumé du contenu de la page N° 3
This product offers: INSTANT TRANSMISSION is the state- of-the-art new wireless transmission technology, exclusively designed and developed by LA CROSSE TECHNOLOGY. INSTANT TRANSMISSION offers you an immediate update (every 4 seconds!) of all your outdoor data measured from the sensors: follow your climatic variations in real-time! INVENTORY OF CONTENTS 1. WS-7394U-IT— Wireless Weather Station (Figure 1) 2. TX29U-IT—remote temperature sensor (figure 2) 3
Résumé du contenu de la page N° 4
antenna in the Wireless Weather Station. However, due to the nature of the Earth’s Ionosphere, reception is very limited during daylight hours. The Wireless Weather Station will search for a signal every night when reception is best. The WWVB radio station derives its signal from the NIST Atomic clock in Boulder, Colorado. A team of atomic physicists continually measure every second of every day to an accuracy of ten billionths of a second a day. These physicists have created an inter
Résumé du contenu de la page N° 5
DETAILED SET-UP GUIDE I. BATTERY INSTALLATION (When one temperature sensor is being used) 1. First, insert the batteries to the temperature sensor (see “A. Remote Temperature Sensor” below). 2. Within 2 minutes of powering up the sensor, insert the batteries to the Weather Station (see “B. Wireless Weather Station” below). Once the batteries are in place, all segments of the LCD will light up briefly. Following the indoor temperature and humidity, and the time as 12:00 will be dis
Résumé du contenu de la page N° 6
Sensor signal reception icon* * When the signal is successfully received by the Weather Station, the icon will be switched on. (If not successful, the icon will not be shown in LCD) So the user can easily see whether the last reception was successful (icon on) or not (icon off). On the other hand, the short blinking of the icon shows that a reception is being done now. • If the signal reception is not successful on the first frequency (915MHz) for 45 seconds, the frequency is chan
Résumé du contenu de la page N° 7
4. The time and date can be manually set. Once the signal is captured, it will override any time and date set to the time zone selected. 5. Once the time and date are set, the Wireless Weather Station will conduct a search every night at midnight and correct to the accurate time and date (Daylight Saving Time is automatic). If the signal has been received in the past 24 hours, the reception indicator will be displayed. After a successful reception, no more reception attempt would be made
Résumé du contenu de la page N° 8
B. There are many different modes the indoor weather station can be set to. The LCD shown is the normal operating mode, and your actual data shown will be different based on your local settings and conditions. IV. Function Key Layout A. The below picture shows the four function keys used in programming and operation of your indoor weather station V. Program Mode The program mode is laid out in a manner that allows you to program each function separately, or you ca
Résumé du contenu de la page N° 9
4. Press and release the “SET” button to confirm the LCD contrast setting and continue to the Time Zone setting. C. Time Zone Setting 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “SET” button once more to advance to the Time Zone setting. 4. A number will flash to the left of the letter “h” at the top of the display just below the time display. 5. Press and release th
Résumé du contenu de la page N° 10
4. “RCC” will appear above the indoor temperature/humidity display and “ON” or “OFF” will flash above that. 5. Press and release the “OUT/+” button to select radio-controlled time ON/OFF setting. 6. Press and release the “SET” button to confirm the radio-controlled time ON/OFF setting and continue to the 12/24-hour Time Mode setting. F. 12/24-hour Time Mode 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash n
Résumé du contenu de la page N° 11
H. Setting The Minutes Manually 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and a number will flash next to it. 3. Press and release the “SET” button six more times to advance to the Manual Minutes setting. 4. The minutes will begin to flash at the top of the display. 5. Press and release the “OUT/+” button to select the desired minutes. 6. Press and release the “SET” button to confirm the minutes and continue to the Year setti
Résumé du contenu de la page N° 12
3. Press and release the “SET” button nine more times to advance to the Manual Date setting. 4. The date will begin to flash below the time display. 5. Press and release the “OUT/+” button to select the desired date. 6. Press and release the “SET” button to confirm the date and continue to the Temperature Measuring Units setting. L. Temperature Measuring Units Selection (°F or °C) 1. Press and hold the “SET” button for five seconds. 2. “lcd” will appear at the top of the display and
Résumé du contenu de la page N° 13
3. Press and release the “SET” button twelve more times to advance to the Relative Pressure setting. 4. The barometric air pressure will flash in the middle of the display, just below the forecast icon 5. Press and release the “OUT/+” or “IN” button to select the desired relative air pressure value. 6. Press and release the “SET” button to confirm the relative pressure setting and continue to the Forecast Sensitivity setting. O. Forecast Sensitivity Setting 1. Press and hold the “SET”
Résumé du contenu de la page N° 14
FEATURES AND OPERATIONS A. Minimum and Maximum Temperature and Humidity 1. Indoor Minimum and Maximum Temperature and Humidity The indoor weather station automatically stores the minimum and maximum indoor temperature and humidity. The minimum and maximum values are updated automatically when a new minimum or maximum is recorded, or until manually reset. a. From the normal display mode, press and release the “IN” key once to view the indoor maximum temperature and humidity
Résumé du contenu de la page N° 15
Note: To reset the outdoor minimum and maximum temperature, first display the values you wish to reset (minimum or maximum). Next press and hold the “SET” key for at least three seconds. You will see then that the values will reset to the current temperature and corresponding time. B. Multiple Remote Temperature Sensors The WS-7394U-IT is able to receive signals from 2 additional temperature sensors. The following are instructions for the set-up of temperature sensor units with th
Résumé du contenu de la page N° 16
b. The minimum and maximum temperature of the additional remote sensor can be displayed by pressing the “OUT/+” button. c. To reset the minimum and maximum temperature readings press and hold the “SET” button for 3 seconds and that temperature record for that remote sensor will be reset only. Each remote sensor will have its own minimum and maximum values stored. D. Comfort Indicator for Indoor Temperature and Humidity 1. The comfort level indicator appears inbetween the indoor t
Résumé du contenu de la page N° 17
2. The icons change in order, from “sunny” to “sun with clouds” to “clouds with rain” or the reverse. 3. It will not change from “sunny” directly to “clouds with rain”, although it is possible for the change to occur quickly. 4. If the symbols do not change, the weather has not changed (or the change has been slow and gradual). 5. The sensitivity of the change in foreacst icon is set by the user in section F of the Detailed Set Up Guide. F. Weather Tendency Arrows Pressure trend 1.
Résumé du contenu de la page N° 18
Note: For accurate barometric pressure trends, the Weather Station should operate at the same altitude for example, it should not be moved from the ground to the second floor of the house. Should the unit be moved to a new location, discard readings for the next 48-60 hours. This feature cannot be turned off. VII. MOUNTING Note: Before permanently mounting, ensure that the Wireless Weather Station is able to receive signals from the sensors and WWVB signal at the desired loc
Résumé du contenu de la page N° 19
a. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. b. Remove the protective strip from one side of the tape. c. Adhere the tape to the designated area on the back of the mounting bracket. d. Remove the protective strip from the other side of the tape. e. Position the remote temperature sensor in the desired location, ensuring that the Wireless Weather Station
Résumé du contenu de la page N° 20
D. Immediately remove all low powered batteries to avoid leakage and damage. E. Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Technology for repairs. TROUBLESHOOTING Problem: The LCD is faint. Solution: 1) Set the LCD contrast to a higher level. 2) Replace batteries. Problem: No outdoor temperature is displayed. Solution: 1) Remove all batteries, reinsert into the remote temperature sensor first, then into the indoor weather statio
