Instruction d'utilisation Philips DVD Player MCD710

Résumé du contenu de la page N° 1

2
User Manual
1
Quick Start Guide
MCD710
Quick Start Guide
What’s in the Box?
You should find these items upon opening the box.
Quick start guide User manual
Remote control with two
FM antenna Composite Video Cable
AAA batteries
MCD710 QUG_12_Eng 1 2007.11.29, 17:28

Résumé du contenu de la page N° 2

1 Connect the FM antenna. 44 2 Tips Connect the composite video to a TV. – See the User Manual for other TV connection options. 3 –For connecting to a Progressive Scan Connect the power cords of the system and TV. TV, refer to the user manual for proper connections and detailed setup. 4 AC power 3 1 2 Speaker (right) Speaker (left) 1 3 FM antenna Setting up the TV 1 Press SOURCE (DISC on the remote control) to select disc source. 2 Turn on the TV and set it to the correct Video In channel. MCD71

Résumé du contenu de la page N° 3

Setting the clock 1 In standby mode, press and hold CLOCK on the remote. 2 When the hour digits flash, turn VOLUME-/+ on the system or press VOL +/- on the remote to set the hours. 3 Press CLOCK again and the minute digits flash. Then turn VOLUME-/+ on the system or press VOL +/- on the remote to set the minutes. 4 Press CLOCK again to confirm the time setting. Setting DVD menu options IMPORTANT! If the progressive scan feature is activated but the connected TV does not support progressive signa

Résumé du contenu de la page N° 4

Playing a disc 1 Press ç to open the disc tray and load in a disc, then press the same button again to close the disc tray. ➜ Make sure the label side of the disc is facing up. 2 Playback will start automatically. If not pressÉÅ. 3 To stop playback, press 9. Programming and tuning to radio stations 1 Press SOURCE (TUNER on the remote) to select tuner source. 2 Press PROGRAM on the remote for more than two seconds to program all available stations in order of waveband. 3 Press PRESET+/- (¡ / ™ on