Résumé du contenu de la page N° 1
Room Air Conditioners
AUTO F
C
AUTO FAN AM
CONTINUOUS PM
SET POINT ON OFF
ROOM TEMP SCHEDULE
CHECK $MART
AUTO SPEED FILTER
SYSTEM FAN MODE
POWER
FAN SPEED SCHEDULE
Q Chassis Models
115-Volt: SQ05, SQ06, SQ08, SQ10
115-Volt: EQ08
93001003_01
Installation and Operation Manual
Résumé du contenu de la page N° 2
Thank you for your decision to purchase the Friedrich High Effi ciency Air Conditioner. Your new Friedrich has been carefully engineered and manufactured to give you many years of dependable, effi cient operation, maintaining a comfortable temperature and humidity level. Many extra features have been built into your unit to assure quiet operation, the greatest circulation of cool, dry air, and the most economic operation. THANK YOU, on behalf of our entire company, for making such a wise purc
Résumé du contenu de la page N° 3
Table of Contents Table of Contents ......................................................................................................................................................................................................................................................................................3 Safety Precautions .....................................................................................................................................................................
Résumé du contenu de la page N° 4
Safety Precautions Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is a safety Alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol with the word “WARNING” or “CAUTION”. These words mean: Indicates a hazard which, if not avoided, can result in severe person
Résumé du contenu de la page N° 5
Unpacking Instructions STEP 1. CUT ALL PACKING STRAPS. STEP 4. SLOWLY REMOVE OUTER BOX. STEP 2. CUT TAPE AND OPEN. STEP 5. REMOVE CORNER POSTS. STEP 3. REMOVE TOP PACKAGING MATERIAL AND CARTON STEP 6. REMOVE UNIT FROM SHIPPING TRAY. CONTAINING SIDE CURTAINS. STEP 7. REMOVE CARBON FILTER AND HARDWARE FROM BOTTOM TRAY. STEP 2 STEP 1 STRAPS X4 STEP 4 STEP 3 STEP 6 STEP 7 STEP 5 5
Résumé du contenu de la page N° 6
Table 1. WARNING: Before Operating Your Unit CIRCUIT RATING REQUIRED WALL OR TIME DELAY Make sure the wiring is adequate for your unit. RECEPTACLE FUSE MODEL If you have fuses, they should be of the time delay type. Before you install AMP VOLT NEMA NO. or relocate this unit, be sure that the amperage rating of the circuit breaker or time delay fuse does not exceed the amp rating listed in Table 1. SQ05 SQ06 SQ08 SQ10 15 125 5-15P DO NOT use an extension cord. EQ08 The cord provided will
Résumé du contenu de la page N° 7
Standard Filter Cleaning / Installation Instructions STEP 1. Swing the door open and remove the fi lter by grasping the STEP 2. Clean the front frame by washing the dirt from the fi lter. Use a fi lter grip and pushing the fi lter holder upward and outward. mild soap solution if necessary. Allow fi lter to dry. STEP 3. Install the fi lter back into the unit. Follow the Instructions on the inside of the front door. Figure 3 Figure 2 FILTER DOOR FILTER FILTER FRAME DOOR INSTRUCTIONS FRR075 FRR076 Prem
Résumé du contenu de la page N° 8
Control Panel Operation Let’s check out how to control your air conditioner. On the control panel, just above the POWER , is a liquid crystal display ( LCD). All of the control panel function buttons and mode icons can be viewed in Figure 6. Power On – Press the button to turn on the air conditioner. The power button illuminates to indicate that the power is on. The backlight on the power switch will automatically dim to 20% intensity after 15 seconds of inactivity. The remote control can also
Résumé du contenu de la page N° 9
Kühl Control Options The “Residential” (40 Hr. Work Week) Schedule has four (4) time periods: 06:00, The Kühl gives you a variety of options for control, programming, and 08:00, 18:00, and 22:00. This option will cause your Kühl Q unit to raise the room scheduling including wireless capabilities temperature temporarily to 85°F during the hours wh en most people are away at work, lower them again to 78°F prior to the time when most people will return Wireless Programming and Control: home,
Résumé du contenu de la page N° 10
FAN MODE AUTO FAN FAN MODE – The button allows you to select between and Control Panel Operation Instructions CONTINUOUS modes. SYSTEM - The SYSTEM button allows you to sequentially select three modes AUTO FAN (No Cooling Demand) of operation: COOL HEAT Not available on some models FAN ONLY F COOL MODE AUTO FAN 79 SET POINT F AUTO FAN FRR112 74 SET POINT AUTO FAN When in the mode, the fan only operates when the system has a demand to cool or heat the room. Note: the fan is off (no
Résumé du contenu de la page N° 11
The icon illuminates. UP and DOWN - arrows - Pressing either or button changes the system's set point (desired room temperature). These buttons are also The TIMER function (option 1, system default) allows you to de ne a daily used to make system parameter changes later in this manual. system ON and OFF time window. For example, you can command the system to turn ON at 8:15 am and turn OFF at 1:30 pm everyday. The SCHEDULE function allows you to choose either Residential (option 2) o
Résumé du contenu de la page N° 12
and 4 C FRR130 FRR134 Use the or buttons to adjust the day (1 to 7). The day setting is up A “C” will ash for 5 seconds and then revert to a normal display. to you the user. If you set the current day = 1, and today is Tuesday, then Day 1 = Tuesday. C AUTO FAN F AUTO FAN 26 SET POINT 79 SET POINT FRR135 The ºF icon goes away and the ºC icon illuminates on the normal display. FRR131 Press TIMER SET (Refer to Figure 8) button to exit and save the SET DIM Function TIME function. The TIMER S
Résumé du contenu de la page N° 13
This means there is a compressor demand but the system is not ready for the compressor to operate. For example a short power outage, the compressor will not restart until the internal pressures of the compressor are at the proper level. Lock Control Panel FAN To lock the front panel controls, press and hold the SPEED + buttons 3 for 3 seconds. The lock icon illuminates to indicate the locked status. Control panel buttons will not operate during lockout. FRR194 The 3 indicates a DIM setti
Résumé du contenu de la page N° 14
External Control Status Commercial (Schedule #2) - When selected the unit follows a pre- programmed set of operational parameters that covers 7 days of $MART The icon illuminates to indicate that the system is being controlled the week with 2 time windows during each day. Each time window remotely. has it's own set of 6 operating parameters. Refer to Addendum. F AUTO FAN 79 1 SET POINT SCHEDULE $MART FRR125 FRR137 1. To change the selection, press and hold the TIMER/SCHEDULE button for 3
Résumé du contenu de la page N° 15
F AUTO FAN 79 SET POINT FRR139 FRR143 The display returns to normal once the settings are saved. To turn on the timer or schedule selected, press button and let go, the system will operate in the mode (1, 2 or 3) you selected. Timer Stop Time Modify the TIMER Function Timer Start Time F AUTO FAN F 79 SET POINT AUTO FAN 79 SET POINT FRR144 The display shows a normal system. Press and hold the MIN button (Figure 8) for 3 seconds. Note the Timer start - stop times may be set even when
Résumé du contenu de la page N° 16
Schedule ON Scenarios F AUTO FAN F AUTO FAN 79 SET POINT 79 SET POINT FRR147 The display returns to normal once the settings are saved. FRR154 The display shows a normal system. Timer - Scheduler Control Block If the Schedule function is turned ON during normal operation F AUTO FAN 79 SET POINT SCHEDULE SCHEDULE FRR148 If the unit is operating in the TIMER or SCHEDULE mode, and then you FRR153 press any button except the button, the Timer icon begins to SCHEDULE and Timer icons illuminates.
Résumé du contenu de la page N° 17
Scheduler OFF Scenarios Timer ON Scenarios F F AUTO FAN AUTO FAN 79 79 SET POINT SET POINT SCHEDULE FRR160 FRR156 The display shows a normal system. The display shows the unit in Schedule mode. F AUTO FAN 79 SET POINT FRR157 FRR161 If the Timer function is turned ON during the Off time, the icon If the Schedule function is turned OFF during an active state (not off), the illuminates. The control system immediately turns the unit OFF. SCHEDULE Timer and icons turn off. The control stays in
Résumé du contenu de la page N° 18
Scenario 2: F AUTO FAN F AUTO FAN 79 SET POINT 79 SET POINT FRR163 FRR168 If the Schedule function is turned OFF during an in-active (OFF) period, SCHEDULE the Timer and icons turn off. The unit wakes up in the last The display shows the unit in Timer mode during an active (ON) period. known non-schedule state. Timer OFF Scenarios Scenario 1: F AUTO FAN 79 SET POINT FRR169 If the Timer function is turned OFF during the ON time. The Timer icon FRR166 turns off. The control stays in the curr
Résumé du contenu de la page N° 19
FAN SPEED Button - Used to sequentially select new fan speed, plus Remote Control Operation FAN AUTO operation. When the button is pressed, the fan speed icon SPEED (triangle) changes to indicate the new speed level. Fan speed automatically Remote Control - Refer to Figures 10 and 11 during operation description. varies depending on the set temperature on the control panel and the actual Getting Started - Install two (2) AAA batteries in the battery compartment room temperature. For exam
Résumé du contenu de la page N° 20
Figure 10 DISPLAY AUTO FAN CONTINUOUS 88 AUTO C F SYSTEM FAN MODE SYSTEM FAN MODE POWER POWER TEMPERATURE TEMPERATURE UP DOWN FAN SPEED SCHEDULE SCHEDULE FAN SPEED FRR081 Figure 11 COOL HEAT FAN ONLY ICON ICON ICON SYSTEM MODE AUTO FAN FAN MODE CONTINUOUS 88 AUTO FAN SPEED C F °F / °C ICONs SCHEDULE ICON FRR082 20
