Résumé du contenu de la page N° 1
Résumé du contenu de la page N° 2
Table of Contents Table of Contents -------------------------------------------------------- -----1 Thank You----------------------------------------------------------------- -----2 Energy Saving Tips------------------------------------------------------ -----2 Notes------------------------------------------------------------------------ -----2 Technical Specifications------------------------------------------------------3 Safety Precautions-------------------------------------------------
Résumé du contenu de la page N° 3
Thank You Thank you for purchasing an EdgeStar portable air conditioner. It should provide you with years of reliable cooling. Among other features, this versatile unit exhausts all the condensate that it extracts from your air. Additionally, this portable air conditioner features auto restart. If power to the unit is interrupted, the unit “remembers” its previous settings when power is restored. In order to properly use all features of this portable air conditioner, please read this owner’
Résumé du contenu de la page N° 4
Technical Specifications Model AP310SS Electrical Power Supply 115 Volts / 60 Hertz Rated Power Consumption During Cooling See Label on Unit Dehumidification Capacity 38 Pints per 24 Hours Refrigerant R22 Refrigerant Load 500g Fan Speeds 3 Airflow (H/M/L) 200/170/150 cfm Noise Level 52dB(A) Dimensions (HxWxD) 31"x14"x13.82" Net Weight 55 Pounds Timer 0.5-24 hours Notes: 1) The above data were obtained in the following conditions: Cooling conditions: Dry bulb/Wet bulb: 95/75°F
Résumé du contenu de la page N° 5
Safety Precautions C A B 1. Do not insert anything into the grill (Fig. A.) 2. Make sure all children are properly supervised around this portable air conditioner (Fig. B.) 3. Do not use an excessively wet cloth or industrial solvents to clean this unit (Fig. C.) 4. Do not damage the power cord (Fig. D.) 5. Do not use the portable air conditioner in the presence of flammable substances or vapors such as alcohol, insecticides, gas, etc (Fig. D.) 6. Do not yank on the power cord or place
Résumé du contenu de la page N° 6
10. Make sure the portable air conditioner is connected to a grounded power outlet. 11. This portable air conditioner is designed to operate in an ambient temperature of 64°-100° F. 12. This portable air conditioner has been designed for residential use. 13. Always turn the portable air conditioner off before unplugging it. 14. Do not use this portable air conditioner for functions other than those described in this owner’s manual. 15. Do not tilt the portable air conditioner. 16. Do not
Résumé du contenu de la page N° 7
Parts and Accessories 1) Parts Operati on Panel H andl e Ai r Inl et Ai r Fi l ter Ai r O ut l et Con t r o l Si gnal Receptor Hot Ai r Di schargi ng Port Use to connect ai r hose. Upper Drai n Port Ai r Inl et for condenser si de Down Drai n Port Cast er 6
Résumé du contenu de la page N° 8
2) Accessories Exhaust Duct Indoor Terminal End Wi ndow Ki t Adapter Window Ki t Mai n pi ece Water Drai n Hose Installation When you use this portable air conditioner as an air conditioner or a dehumidifier, the hot air should be exhausted out of the room. When the unit is operating in fan-only mode, no exhaust is required. You do not need to hookup the window kit and hot air exhaust hose when you use the unit as a fan. If you use this portable air conditioner in cooling mode without ve
Résumé du contenu de la page N° 9
1) Exhaust Hose Installation The exhaust hose must be installed onto the unit before any further installation can occur. a) Pull out about 6” of one end of the exhaust hose. b) Screw the exhaust connector onto the exhaust hose in a clockwise motion. c) Snap the exhaust connector into place in the back of the unit. See below for a few notes about exhaust hose installation: Note: Mounting the exhaust hose The suppl i ed exhaust hose can be extended from 16 i nches to 63 i nches l ong
Résumé du contenu de la page N° 10
2) Window Installation Windows Windows Window Ki ts Window Ki ts a) Make sure the exhaust hose is properly installed onto the portable air conditioner as described above. b) Pull out about 6” of the free end of the exhaust hose and install the window kit adapter onto the exhaust hose by screwing it on in a clockwise manner. c) Open your window about 5”. d) Adjust the length of the window kit to the same width (or length) of the window. If necessary, the window kit can be cut to size. e
Résumé du contenu de la page N° 11
3) Wall Installation a) Make sure the exhaust hose is properly installed onto the portable air conditioner as described above. b) Make a hole of 5 1/8” diameter in your wall. c) Position the portable air conditioner near the hole. d) Feed as much exhaust hose as is needed through the hole. Notes: Be sure to cover the hole when it is not being used by the portable air conditioner. Be sure to have a qualified person make the hole to avoid the possibility of injury or of unintended damage
Résumé du contenu de la page N° 12
DOWN UP 4) or :Temperature / Time Buttons These buttons are used to adjust the thermostat setting up or down, or to adjust the time setting when using the timer. NOTE: The temperature can be displayed in Celsius or Fahrenheit. To change from one scale to another, press and hold the On/Off button for 20 seconds. TIMER 5) :Timer Button Used to set or cancel the timer. The timer has two functions. When the unit is off, the “On Timer” can be used to turn the unit on after a set time. When th
Résumé du contenu de la page N° 13
timer display will begin to blink. While it is blinking, press the timer button again. The time will disappear from the Timer Display and an “F” will be displayed. The timer has now been cancelled. 2) Remote Control O N/ O FF FAN SPEED TEM P/ TI M E TI M ER M O DE The six buttons on the remote control are same as the six buttons on the control panel of the main unit. See the control panel section above for an explanation of how to use the buttons. The remote control uses a lithium batte
Résumé du contenu de la page N° 14
probably rise by a few degrees (if you do not use the exhaust hose.) The Dehumidifying mode will not work in temperatures below 64°F. Cooling 1) Plug the power cord into a power outlet. 2) Turn on the unit. 3) Press the Mode button until the icon LED next to “Cool” lights up. 4) Select the fan speed by using the Fan button. 5) Set the thermostat using the Temperature / Time buttons. The thermostat is adjustable between 64°F and 90°F in one degree increments. Cooling mode cools and dehum
Résumé du contenu de la page N° 15
pump will pump water into the bucket. When the flow of water stops, you can turn off the portable air conditioner. Remove the drain hose and reinstall the drain cap. The unit will now be almost completely drained. If you were draining the unit to allow it to continue cooling or dehumidifying, simply turn the unit back on to the settings you want. Usi ng the water drai n hose supplied wi th uni t, which is about si x feets l ong. Upper Drai n Port Addi ti onal Drai n Hose Water Box Water
Résumé du contenu de la page N° 16
Make sure the unit is turned off and unplugged before performing any maintenance. Do not immerse the unit in water or other liquids. Do not pour liquids into the unit. Some parts may have sharp edges. Be careful to avoid cutting yourself. 1) Filter This portable air conditioner has a washable pre-filter that filters contaminants out of the air. This pre-filter should be cleaned about once every two weeks or as needed. If it becomes clogged with dust, the efficiency of the unit will be l
Résumé du contenu de la page N° 17
3) Long Term Storage Down Drai n Por t 1) On a warm day, run the unit in Fan-only mode for a few hours to exhaust all condensate and to completely dry out the interior. 2) Turn off the unit and unplug it. 3) Empty any residual condensate water by unplugging the lower drain port and allowing any water accumulated there to drain out. Reinstall the rubber stopper after doing this. 4) Detach the exhaust hose and collapse it to its smallest size. 5) Take out the filter. Clean and dry it (
Résumé du contenu de la page N° 18
Troubleshooting Problem Possible Cause Solution There was a power failure Restore the power supply The plug is not correctly inserted Insert the plug correctly into the into the socket socket Flip the switch, change the fuse, or turn the breaker back on. Also The automatic switch, line fuse, note that you may have too many or breaker has been tripped appliances drawing power on one The portable air conditioner does circuit, so you may need to move not turn on some onto another circuit
Résumé du contenu de la page N° 19
Check the exhaust duct. Remove The exhaust is obstructed any obstructions The unit is set in dehumidifying Set the unit in cooling mode mode The unit is set to low fan speed Set the unit to high fan speed Close all windows and doors into Windows or doors are open the room when the unit is cooling There are too many people in the You may need additional cooling room or another air conditioner Close curtains and blinds. Try to There is direct sunshine into the minimize the amount of
Résumé du contenu de la page N° 20
NO CO M Circuit Diagram Room 9C Water Level Condenser Si de Tem p Recei ver PCB Sensor Det ect o r 3C Fan M ot or C1 O per at i on Panel PCB HO Mai n Control PC B LO Cu t - of f Bump W at er Pum p HI MI C3 LI Cut - of f Evaporator AC - N AC - N 0 AC - N 1 Si de Fan M ot or C Pr o- Co m pr essor tector S Tr ansf or m er R L C2 PO W ER N SU PPLY G C1:Runni ng Capaci tor For Fan Motor of Condenser Si de C2:Runni ng Capaci tor For Com pr essor C3:Runni ng Capaci tor For Fan Motor of Evap
