Résumé du contenu de la page N° 1
HD COLOR CAMERA
HDC1000R
OPERATION MANUAL [English]
1st Edition (Revised 1)
Résumé du contenu de la page N° 2
For the customers in Europe WARNING This product with the CE marking complies with both the EMC Directive and the Low Voltage Directive issued by the To reduce the risk of fire or electric shock, Commission of the European Community. do not expose this apparatus to rain or Compliance with these directives implies conformity to the moisture. following European standards: • EN60950-1: Product Safety To avoid electrical shock, do not open the � EN55103-1: Electromagnetic Interference (Emiss
Résumé du contenu de la page N° 3
Der Hersteller dieses Produkts ist Sony Corporation, 1-7-1 For the State of California, USA only Konan, Minato-ku, Tokyo, Japan. Perchlorate Material - special handling may apply, See Der autorisierte Repräsentant für EMV und Produktsicherheit www.dtsc.ca.gov/hazardouswaste/perchlorate ist Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Perchlorate Material : Lithium battery contains perchlorate. Stuttgart, Deutschland. Bei jeglichen Angelegenheiten in Bezug auf Kundendienst oder Garantie
Résumé du contenu de la page N° 4
Table of Contents Overview ................................................................................. 5 Features........................................................................................5 Basic System Configuration ........................................................6 Precautions ............................................................................ 8 Phenomena Specific to CCD Image Sensors...............................8 Locations and Functions of Parts ..........
Résumé du contenu de la page N° 5
VF detail Various functions are provided for the VF detail signal, Overview which can be added only on images on the viewfinder screen in order to facilitate focusing in various situations: Functions for coloring the VF detail signal, flickering the The HDC1000R is a 2/3-type high-definition video camera VF detail signal by adding modulation, thickening the VF for studio and OB-van use for 2,200,000 pixels. It detail signal, and automatically compensating the VF incorporates the latest p
Résumé du contenu de la page N° 6
Versatile detail control functions Basic System Configuration Skin-tone detail function Examples of devices and parts that may be used with the This function allows control (emphasis or suppression) of HDC1000R are shown on the next page. the detail level for just a certain hue or chroma area in the image, by creating a detail gate signal from color Note components of your specified hue, such as skin tones. Production of some of the peripherals and related devices The detail levels of three
Résumé du contenu de la page N° 7
Connection example HDVF-C730W/C950W/550 Viewfinder HKCU1001 HDVF-20A HDVF-200 HKCU1003 BKW-401 Viewfinder HDVF-C30WR Rotation Bracket HDVF-C35W Viewfinder HKCU1005 HDC1500R/1400R/ Zoom Lens 1550R/1450R (for ENG/EFP) portable camera Optical Fiber Cable HDCU1000 HD Camera “Memory Stick” With HKCU1001 CAC-6 Control Unit or HKCU1003 Return Video Selector VCT-14 Intercom Headset Tripod Picture Waveform Adaptor Monitor Monitor CAC-12 Microphone Microphone HKCU1001 BNC BNC holder (VBS) (VBS) Tri
Résumé du contenu de la page N° 8
Smear When an extremely bright object, such as a strong spotlight Precautions or flashlight, is being shot, vertical tails may be produced on the screen, or the image may be distorted. Note on laser beams Aliasing Laser beams may damage the CCDs. If you shoot a scene When fine patterns, stripes, or lines are shot, they may that includes a laser beam, be careful not to let a laser beam appear jagged or flicker. become directed into the lens of the camera. Do not subject to severe shocks Dama
Résumé du contenu de la page N° 9
Locations and Functions of Parts Right Side and Left Side Right side a Up tally lamp b Safety lock c Camera number plate 1 d Side panel lock screws e Lens lock and knob g Accessory bracket OUTPUT PROMPTER REMOTE CRANE TRACKER RET DC OUT 12 CONTROL f Cable clamp SDI 1 SDI 2 TEST OUT h SDI 1 connector q DC OUT connector i SDI 2 connector p RET CONTROL connector j TEST OUT connector o TRACKER connector k PROMPTER 1 connector n CRANE connector l PROMPTER 2 connector m REMOTE connector a Up tally lam
Résumé du contenu de la page N° 10
a Up tally lamp j TEST OUT (test signal output) connector (BNC Lights when the camera receives a red tally signal. type) When the CALL button on the MSU-900/950 Master To output the analog signal. Setup Unit or the RCP-700/900-series Remote Control This also supplies the VBS signal, an HD signal nearly Panel is pressed, the lamp lights if previously off or goes equal to the signal output from the VF connector, an HD- off if previously on. The brightness of the lamp can be SYNC signal, or an SD
Résumé du contenu de la page N° 11
OFF: When the connected microphone requires no external power. +48 V: When the connected microphone requires an external power source. A power of +48 V is supplied to the microphone. (No function has been assigned to the uppwermost position. No power is supplied to the microphone.) Note To supply a power of +12 V, modification of the camera is required. t AUDIO IN 2 switch Set this switch according to the device connected to the AUDIO IN 2 connector. MIC: When connecting a microphone AES/E
Résumé du contenu de la page N° 12
Rear Panel e; H-POSI control wlWIDTH control wkV-POSI control wj HEIGHT control z CURSOR ON button y CURSOR STORE button x RET 1 button a Video signal select buttons w RET 2 button b POWER indicator POWER R G B RET 1 RET 2 c ND filter selector v RET 1 knob 3 3 2 2 4 4 d CC filter selector 1 1 FILTER LOCAL 3 H-POSI V-POSI u RET 2 knob 2 4 1 5 e FILTER LOCAL button ON t “Memory Stick” section ND UP TALLY CURSOR WIDTH HEIGHT STORE C B D ON A E f UP TALLY switch 12 3 s Back tally lamp OFF CC 1 VF
Résumé du contenu de la page N° 13
Green: Power is being supplied to the camera. h SCREEN SIZE MARKER switch Red: Power is being supplied to the camera, but the CAM To control the display of the screen size marker as follows: PW button of the MSU-900/950 Master Setup Unit or ON ( ): Areas outside the specified ratio area will be RCP-700/900-series Remote Control Panel is set to darkened. OFF. ON ( ): The screen size marker (white lines) will be Yellow: Power is being supplied to the camera, but the VF displayed. PW button of th
Résumé du contenu de la page N° 14
p VF DETAIL (viewfinder detail) control v RET 1 knob Adjust the amount of detail of the picture on the viewfinder This knob selects from the four return signals from the screen when the VF DETAIL switch is set to ON. This has CCU. no effect on the output signal of the camera. By pressing in the RET 1 button, you can view the selected return video signal in the viewfinder. The signal supplied q CALL button from the TEST OUT connector will also be switched. � Press to call the operator of the
Résumé du contenu de la page N° 15
Intercom Panel For JN3 (USA, Canada, and other countries) models MIC MIC ENG PROD PTT OFF ON ENG PROD PTT OFF ON PGM1 PGM2 PGM1 PGM2 INTERCOM INTERCOM INTERCOM 1 INTERCOM 2 g INTERCOM 2 connector a INTERCOM 1 connector b ENG/PROD switch f MIC switch c PGM1 control e PGM2 control d INTERCOM control d INTERCOM control e PGM2 control c PGM1 control b ENG/PROD switch f MIC switch a INTERCOM 1 connector (XLR 5-pin) Connects to an XLR 5-pin headset. The INTERCOM 1 connector can be used for communicat
Résumé du contenu de la page N° 16
For CED (Europe) model a INTERCOM 1 connector c MIC2 switch b MIC1 switch d INTERCOM 2 connector MIC1 TRACKER MIC2 ENG OFF PROD ENG OFF PROD ENG PROD PGM1 PGM2 INTERCOM 1 INTERCOM 2 i PGM2 control h TRACKER control g PGM1 control f PROD control e ENG control a INTERCOM 1 connector (XLR 5-pin) h TRACKER control Connects to an XLR 5-pin headset. The INTERCOM 1 Adjust the intercom audio level at the TRACKER connector can be used for communication via the engineer connector (page 10) on the connec
Résumé du contenu de la page N° 17
Attaching Accessories Mounting the Camera to the Tripod Several types of tripods are available. Select an appropriate Caution tripod according to the type of lens to be used, and mount Firmly attach the V-wedge shoe to the camera, and mount the camera to the tripod as described below: the camera to the tripod securely. Otherwise the camera may fall down. HDC1000R Bottom of the video camera V-wedge shoe (supplied Tripod with the tripod) 3 1 V-wedge shoe Stopper 1 Attach the V-wedge shoe (sup
Résumé du contenu de la page N° 18
Attaching the Lens to the Camera Attach a hanger-mount-type lens recommended by Sony. Note For details on the lens, refer to the instruction manual Be sure to check the following two points before attaching furnished with the lens. the lens: � That the pan-lock and tilt-lock levers on the tripod are To attach, proceed as follows: fixed. � That there is not a pin at part A on the lens shown in the figure below (if there is, remove it). If the pin cannot be removed, consult your Sony represe
Résumé du contenu de la page N° 19
Attaching the 7- or 9-Type Viewfinder For details on attaching a viewfinder, refer to the Note instruction manual furnished with the viewfinder. Be sure that the VF connector on the viewfinder mount is positioned at a right angle to the control panel of the Proceed as follows: camera as shown below. Bottom of the viewfinder Projections Panning base Mounting wedge 1 Viewfinder mount V-shaped recess 2 VF connector 3 Pan-friction screw 1 Place the viewfinder on the viewfinder mount of the Cauti
Résumé du contenu de la page N° 20
Detaching the viewfinder Before detaching the viewfinder, check the following two Setting the Focus Assist points: � That the lift-release knob of the viewfinder is at its Function lowest position � That the locking lever is fixed Using the OPERATION menu, the assist functions for Proceed as follows: easier focusing on the viewfinder, can be activated. Adding the VF Detail Signal Adding the VF detail signal to sharp edges in the image on the viewfinder screen makes it easier to check the foc
