Résumé du contenu de la page N° 1
HDW-750/750CE
HD CAMCORDER
HDW-750
HDW-750CE
OPERATION MANUAL [English]
1st Edition (Revised 3)
Résumé du contenu de la page N° 2
WARNING To prevent fire or shock hazard, do not expose the unit to rain or moisture. To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only. AVERTISSEMENT Afin d’éviter tout risque d’incendie ou d’électrocution, ne pas exposer cet appareil à la pluie ou à l’humidité. Afin d’écarter tout risque d’électrocution, garder le coffret fermé. Ne confier l’entretien de l’appareil qu’à un personnel qualifié. WARNUNG Um Feuergefahr und die Gefahr eines elektrischen
Résumé du contenu de la page N° 3
For the customers in USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guara
Résumé du contenu de la page N° 4
For the customers in Europe This product with the CE marking complies with the EMC Directive (89/336/EEC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European standards: • EN55103-1: Electromagnetic Interference (Emission) • EN55103-2: Electromagnetic Susceptibility (Immunity) This product is intended for use in the following Electromagnetic Environment(s): E1 (residential), E2 (commercial and light industrial), E3 (urban
Résumé du contenu de la page N° 5
Für Kunden in Europa Dieses Produkt besitzt die CE-Kennzeichnung und erfüllt die EMV-Direktive (89/336/EEC) der EG-Kommission. Die Erfüllung dieser Direktive bedeutet Konformität für die folgenden Europäischen Normen: • EN55103-1: Elektromagnetische Interferenz (Emission) • EN55103-2: Elektromagnetische Empfindlichkeit (Immunität) Dieses Produkt ist für den Einsatz unter folgenden elektromagnetischen Bedingungen ausgelegt: E1 (Wohnbereich), E2 (kommerzieller und in beschränktem Maße industrielle
Résumé du contenu de la page N° 6
Résumé du contenu de la page N° 7
Table of Contents Chapter 1 Overview 1-1 Features ..................................................................................... 1-1 1-1-1 Camera Features ............................................................... 1-1 1-1-2 VTR Features .................................................................... 1-4 1-2 Example of System Configuration .......................................... 1-6 1-3 Precautions ...............................................................................
Résumé du contenu de la page N° 8
3-2-6 Shooting Pictures at Intervals (Interval Rec Function) (When Using the HKDW-703) ..................................... 3-27 3-2-7 Continuous Recording on the Previous Cut .................. 3-44 3-2-8 Searching for the Last Recorded Portion and Turning in the Recording Pause Mode (End Search Function) ...... 3-45 3-3 Checking the Recording — Playback ................................... 3-46 3-3-1 Checking the Last Two Seconds of the Recording — Recording Review ............................
Résumé du contenu de la page N° 9
4-7 Status Display on the Viewfinder Screen ............................. 4-64 4-7-1 Layout of the Status Display on the Viewfinder Screen ......................................................... 4-65 4-7-2 Selecting the Display Items ........................................... 4-69 4-7-3 Display Mode and Setting Change and Adjustment Progress Messages ........................................................ 4-72 4-7-4 Setting the Marker Display ........................................... 4-74
Résumé du contenu de la page N° 10
Chapter 5 Setting Up the Camcorder 5-1 Power Supply ............................................................................ 5-1 5-1-1 Using a BP-L60A Battery Pack ...................................... 5-1 5-1-2 Avoiding Breaks in Operation Due to Dead Batteries .... 5-4 5-1-3 Using an AC Adaptor ...................................................... 5-5 5-1-4 Using the Anton Bauer Ultralight System ...................... 5-6 5-2 Adjusting the Viewfinder ....................................
Résumé du contenu de la page N° 11
Appendix Specifications ..................................................................................... A-1 Video Camera Section ............................................................... A-2 VTR Section .............................................................................. A-3 Supplied Accessories ................................................................. A-6 Recommended Additional Equipment ...................................... A-6 Menu List .........................
Résumé du contenu de la page N° 12
6 Table of Contents
Résumé du contenu de la page N° 13
Overview 1-1 Features 1) The HDW-750/750CE HD Camcorder combines a HD color video 1 camera, of which the effective picture elements are 1920(H) x 1080(V) 2) 3) and which uses 2/3-type Power HAD sensor CCD imagers with 2,000,000 picture elements, with an HDCAM portable videocassette recorder. Its excellent image quality, sensitivity, portability, and dust- 4) and water-proof construction make it ideal as a camcorder for ENG 5) and EFP in the same way as the earlier BVW-400A/400AP. The introd
Résumé du contenu de la page N° 14
• A simple switch operation enables automatic adjustment of the black 1 set, black balance, and white balance. Memory functions make it easy to replicate the white balance setting appropriate for the lighting conditions. 1) • The ATW function automatically adjusts the white balance for the varying lighting conditions during shooting. 2) • The “TruEye” process is used to ensure naturally colored pictures even when shooting very bright subject. • The video gain can be boosted to 42 dB instantly
Résumé du contenu de la page N° 15
• Setup data specified by video engineers, including the video settings, 1 can be stored in the camcorder itself and on a memory stick as a scene file. This makes it possible to load setup data appropriate for the scene. • Correction values for lens extenders and individual lenses can be stored as a lens file. The values can then be recalled. This makes it possible to shorten adjustment time when the lens is replaced. • A high-performance viewfinder is adjustable forward, backward, and sideways
Résumé du contenu de la page N° 16
1-1-2 VTR Features 1 The VTR features of this camcorder are described below. • Use of the HDCAM format allows high performance HD digital recording and playback while preserving the same ease of use as conventional camcorder equipment. • The same cassette size (S size) as Digital BETACAM can be used to achieve a long recording time of approximately 40 minutes (for 59.94I format) and 48 minutes (for 50I format). • No playback adaptor is needed to see the color playback image on the monitor scree
Résumé du contenu de la page N° 17
generator. 1 • A lithium battery is the back-up power supply for the built-in time code generator enabling the time code to be held for approximately 5 years without charging the camcorder power supply. • Optional long-life battery packs are available. • Pressing the VTR START button on the camcorder or the VTR button on the lens ensures recording continuity from the very next frame. • The time code is displayed in the LCD window screen even when the power is off. The automatic power shut-off fu
Résumé du contenu de la page N° 18
1-2 Example of System Configuration 1 The diagram below shows a typical configuration of the camcorder for ENG and EFP. Viewfinder-related equipment Fog-proof filter (Part No. 1-547-341-11) Video monitor for BKDW-701 color image check Servo filter unit BKW-401 Viewfinder while shooting Rotation Bracket Extension board HKDW-703 for picture cache a) HKDW-702 for Memory stick converting the signal to 525i/625i signal Remote controll equipment RM-B150 Remote Control Unit a) Be sure to attach the HK
Résumé du contenu de la page N° 19
1 For more information about the fittings, connections, or use of additional equipment and accessories, see Chapter 5 as well as the operation manuals for the connected equipment. Camera adaptor b) Lens assembly (−2.8 D to +2.0 D) HDCA-901 for the input of (Part No. A-8262-537-A) the audio channels 3 and b) Lens assembly (−3.6 D to −0.8 D) 4 and the HD-SDI output (Part No. A-8262-538-A) b) Lens assembly (−3.6 D to +0.4 D) (Part No. A-8267-737-A) b) Lens assembly (3 × magnification) (−2.4
Résumé du contenu de la page N° 20
1-3 Precautions Use and Storage 1 Do not subject the camcorder to severe shocks The internal mechanism may be damaged or the body warped. After use Always turn off the power. Before storing the camcorder for a long period Remove the battery pack. Use and storage locations Store in a level, ventilated place. Avoid using or storing the camcorder in the following places. • Places subject to temperature extremes • Very damp places • Places subject to severe vibration • Near strong magnetic fields •
