Résumé du contenu de la page N° 1
A-CCB-100-11 (1)
Black and White Color
Camera Module
Technical Manual
FCB-EX45MC/EX45MCC
2005 Sony Corporation
Résumé du contenu de la page N° 2
Table of Contents Features ..................................................................... 3 Precautions ................................................................ 4 Locations of Controls ............................................... 5 Basic Functions......................................................... 6 Overview of Functions ................................................ 6 Spectral Sensitivity Characteristics .......................... 28 Eclipse ...........................
Résumé du contenu de la page N° 3
Overview Features • The Ex-View HADTM CCD features 380,000 (NTSC) or 440,000 (PAL) effective picture elements and high-sensitivity shooting. The minimum illumination required is 0.01 lx. •18× optical zoom. • Supports external synchronization (V-lock). •Adopts a newly developed DSP for improved picture quality when using the digital zoom. •VISCA is a communications protocol, which enables the camera to be controlled remotely by commands from a host computer/controller. • Six memory locations are
Résumé du contenu de la page N° 4
Overview Precautions Software Other Use of the demonstration software developed by Sony Do not apply excessive voltage. (Use only the Corporation or use of the software with customer specified voltage.) Otherwise, you may get an electric developed application software may damage hardware, shock or a fire may occur. the application program or the camera. Sony Corporation is not liable for any damages under these In case of abnormal operation, contact your authorized conditions. Sony dealer or th
Résumé du contenu de la page N° 5
Locations of Controls Front Left side Bottom Rear 1 Lens 5 Tripod screw holes 2 CN992 connector When a tripod is used, please use 13 10 mm ( /32 in.) screws to attach it 3 TELE button to the camera. Also, please be 4 WIDE button sure to attach the tripod securely. 5
Résumé du contenu de la page N° 6
Basic Functions Basic Functions Commands Overview of Functions • Power On/Off Powers the camera on and off. When the power is off, VISCA commands are the basis of camera control. the camera is able to accept only the lowest level of VISCA Commands; the display and other features are turned off. Timing Chart • I/F clear As VISCA Command processing can only be carried Clears the Command buffer of the FCB camera. out one time in a Vertical cycle, it takes the maximum Clearing the buffer can also be
Résumé du contenu de la page N° 7
Basic Functions The AutoFocus (AF) function automatically adjusts Zoom the focus position to maximize the high frequency The FCB camera employs an 18× optical zoom lens content of the picture in a center measurement area, combined with a digital zoom function allowing you to taking into consideration the high luminance and zoom up to 216×. strong contrast components. - Normal AF Mode Lens specifications: Optical 18×, f = 4.1 to 73.8 mm This is the normal mode for AF operations. (F1.4 to F3.0) -
Résumé du contenu de la page N° 8
Basic Functions • Near Limit Mode Note Can be set in a range from 1000 ( ∞) to C000 (10 mm). When the shutter speed 1/1 s or 1/2 s is used, Auto The focus range is narrowed by excluding the Focus and White Balance may not function fully. unnecessary range. AE – Iris Priority The iris can be set freely by the user to 18 steps Automatic Exposure Mode between F1.4 and Close. The gain and shutter speed are set automatically The variety of AE functions, which allow video signal according to the brigh
Résumé du contenu de la page N° 9
Basic Functions AE – Bright Spot Exposure Mode The bright control function adjusts both the gain and In Full Auto AE, the level for the entire screen is iris using an internal algorithm according to a computed and the optimum Auto Iris and Gain levels brightness level freely set by the user. Exposure is are determined. In Spot AE, a particular section of the controlled by gain when dark and by iris when bright. subject can be designated, and then that portion of the As both gain and iris are fix
Résumé du contenu de la page N° 10
Basic Functions Exposure Compensation Others Exposure compensation is a function which offsets the Mirror Image internal reference brightness level used in the AE This function reverses the video output from the mode by steps of 1.5 dB. camera horizontally. Data Step Setting value Memory (Position Preset) 0E 7 10.5 dB Using the position preset function, 6 sets of camera 0D 6 9 dB shooting conditions can be stored and recalled. This function allows you to achieve the desired status 0C 5 7.5 dB in
Résumé du contenu de la page N° 11
Basic Functions Title Display Synchronization Methods The FCB camera can be given a title containing up to Internal and external synchronization are available; 20 characters such as “ENTRANCE” or “LOBBY”. VISCA Commands allow you to switch between them. The position of the first character (horizontal, vertical) • Internal Synchronization of the title, blinking state, and color can also be An internal vibrator inside the camera generates a changed. synchronizing signal as a basic oscillator. EIA=
Résumé du contenu de la page N° 12
Basic Functions Privacy Zone Function Features •Mask can be set on up to 24 places according to Pan/ Privacy Zone masking protects private objects and Tilt positions. areas such as house windows, entrances, and exits •Mask can be displayed on 8 places per screen which are within the camera’s range of vision but not simultaneously. subject to surveillance. • Privacy Zones are displayed according to priority in Privacy zone masking can be masked on the monitor to alphabetical order. protect privac
Résumé du contenu de la page N° 13
Basic Functions Privacy Zone Setting Command List Command Set Command Command Packet Comments CAM_PrivacyZone SetMask 8x 01 04 76 mm nn Setting Mask(Size) 0r 0r 0s 0s FF See “mm: mask setting list”, “nn: setting”, and “rr: w, ss: h” in “Parameters” on page 14. Display Setting Mask Display On/Off 8x 01 04 77 pp pp pp pp FF See “pp pp pp pp: Mask bit” in “Parameters” on page 14. pp pp pp pp: Mask setting (0: OFF, 1: ON) SetMaskColor 8x 01 04 78 pp pp pp pp qq rr FF Setting Color of Mask See “pp p
Résumé du contenu de la page N° 14
Basic Functions Parameters mm: Mask setting list nn: Setting Mask Name mm (Hex) Mask Name mm (Hex) nn Setting Mask_A 00h Mask_M 0Ch 00 Resetting the zone size (the value of w, h) for the existing mask. Mask_B 01h Mask_N 0Dh 01 Setting newly the zone size (the value of Mask_C 02h Mask_O 0Eh w, h). Mask_D 03h Mask_P 0Fh Mask_E 04h Mask_Q 10h pp: x, qq: y, rr: w, ss: h Mask_F 05h Mask_R 11h Mask_G 06h Mask_S 12h 160 Mask_H 07h Mask_T 13h 3Ch Mask_I 08h Mask_U 14h mask Mask_J 09h Mask_V 15h Mask_K 0
Résumé du contenu de la page N° 15
Basic Functions Comments: Two different color masks can be Details of Setting Commands chosen. Set Mask The colors can be chosen from among 14 colors Command: 8x 01 04 76 mm nn 0r 0r 0s 0s FF including the possibility for semi-transparency of Parameters: each color. Therefore two colors from among the total of 28 colors can be individually set for each mm Setting Mask of 24 privacy zones. See “mm: mask setting list” in “Parameters” on page 14. If the bit of parameter (pp pp pp pp) is set to “0”,
Résumé du contenu de la page N° 16
Basic Functions Alarm Function Grid Use the grid displayed on the screen to set mask This function instructs the camera to detect movement positions (see the figure below). within the monitoring area and then send an alarm signal automatically. 14hex (20(10)) A High level signal is output when camera detects movement inside the monitoring area. A Low level 14hex (20(10)) signal is output when object stops moving. However, when the mode is set to “DAY/NIGHT”, the High level signal is output for d
Résumé du contenu de la page N° 17
Basic Functions ALARM Setting Command List Command Set Command Command Packet Comments CAM _ Alarm On 8x 01 04 6B 02 FF Alarm start Off 8x 01 04 6B 03 FF Alarm stop Set Mode 8x 01 04 6C pp FF Mode Setting *Select one from 13 modes Set Day Night Level 8x 01 04 6D 0p 0p 0p ppp: Day distinction AE level 0q 0q 0q FF qqq: Night distinction AE level. 90 07 04 6B 01 FF High signal output (Low t High edge) 90 07 04 6B 00 FF Low signal output (High t Low edge) VISCA Mode Code (pp) Details of Mode 00 Set
Résumé du contenu de la page N° 18
Basic Functions Flowchart of 12 Modes Function Mode “00” Set the Focus Position Set to the factory preset Hysteresis. Alarm On Focus Position into memory AE moves Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. Focus goes back to the previous position. Low level signal output Far Hysteresis Focus Position High Near Low 18
Résumé du contenu de la page N° 19
Basic Functions Mode “01” Focus Position into memory Alarm On Hysteresis is set to the factory preset. AE moves. Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE does not move for AE does not move for a period of time. a period of time. Low level signal output Update the Focus position data. 19
Résumé du contenu de la page N° 20
Basic Functions Mode “02” Set to the factory preset Set the AE level Hysteresis. AE Level into memory Alarm On AE moves AE moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE goes back to the previous level. Low level signal output Bright Hysteresis AE Level High Dark Low 20
