Instruction d'utilisation American Standard ELITE 4454

Résumé du contenu de la page N° 1

0





1





2




3




4





5





6




Installation
Instructions
4453 SERIES
ELITE
4454 SERIES
SINGLE CONTROL KITCHEN FAUCET
and HAND SPRAY
Thank you for selecting American-Standard...
the benchmark of fine quality for over 100 years.
To ensure that your installation proceeds smoothly--
Certified to comply with ANSI A112.18.1M
please read these instructions carefully before you begin.
M968202 REV.1.2
TOOLS REQUIRED
Phillips Screwdriver
Channel Locks Adj

Résumé du contenu de la page N° 2

0 1 2 3 4 5 6 MAKE WATER SUPPLY CONNECTIONS 2 Turn off hot and cold water supplies before beginning. Connect FLEXIBLE SUPPLIES (1, 2) directly to wall supplies. Connection on fitting supplies are 3/8" compression. Connect left supply to Hot (Marked with a Red Tag) and right supply to Cold wall supply. Use adjustable wrench to tighten connections. 2 Do not over tighten. 1 Faucet supplies are 21" long from faucet base. Note: If

Résumé du contenu de la page N° 3

0 1 2 3 4 5 6 TEST INSTALLED FAUCET 5 Move HANDLE down into "off" position and remove AERATOR. Turn on water supplies and check connections for leaks. Operate HANDLE up and down, left and right to flush water AERATOR lines thoroughly. For faucet with spray, direct SPRAY HEAD into sink and activate SPRAY. Check hose connections for leaks. Move HANDLE down to "off" position and replace AERATOR. CHECK CONNECTIONS FOR LEAKS SERVICE

Résumé du contenu de la page N° 4

0 1 2 3 4 5 6 ELITE SINGLE CONTROL KITCHEN FAUCET with HAND SPRAY MODEL NUMBERS 023603-0070A CARTRIDGE SCREWS 4453 SERIES 4454 SERIES 023529-0070A 060343-0070A CARTRIDGE SPACER WITH O-RINGS 060474-YYYOA SPOUT KIT 066070-YYY0A AERATOR 030126-0070A BUTTON AND SCREW KIT 060342-YYY0A HANDLE KIT 907468-YYY0A ESCUTCHEON CAP 060366-0070A SPOUT SEAL KIT 921877-0070A CAP RETAINER 042850-0070A DIVERTER M953667-YYY0A Replace the "YYY" w