Instruction d'utilisation Woodstock PAL W1226

Résumé du contenu de la page N° 1

MODEL W1226
®
PLANER PAL
®
MINI PLANER PAL KNIFE SETTING JIG
® 7
The Mini Planer Pal knife setting jig was specially designed for use on the 1 /8" diameter cutterheads
®
that come on most portable 10" and 12" planers. With proper care, the Mini Planer Pal should pro-
vide you with years of reliable knife setting service. Do not try to use these jigs on larger diameter
®
cutterheads since the preset knife height and curvature requirements will not be met. Planer Pal
offers larger, adjustable k

Résumé du contenu de la page N° 2

4. Place the new or newly sharpened knife in the cutterhead and tighten slightly so that the knife is 1 held approximately /16" above its final set height. Tighten the locking screws equally to the point that the knife will not slip deeper into the cutterhead under its own weight, but can be pushed deeper with one or two pounds of downward force. Test the tightness by pressing down on the knives with a block of wood. Serious cuts could result if you use your fingers. ® ® 5. Place one Mini Pl