Instruction d'utilisation Black Box RMT3200A-R2

Résumé du contenu de la page N° 1

RMT3200A-R2
Universal Flat Pack Cabinet
The economical 42U cabinet that’s easy
®
BLACK BOX
to transport and assemble on-site.
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500)
Customer
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746
Support
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018
Information
Web site: www.blackbox.com • E-mail: info@blackbox.com

Résumé du contenu de la page N° 2

Universal Flat Pack Cabinet Manual Trademarks Used in this Manual Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc. UL is a registered trademark of Underwriters Laboratories Inc. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. 1. Specifications Technical Specifications ® Approvals UL recognized Construction 18 AWG steel; Front door: Tempered glass Mounting Rails 19" M6 rails Dimensions Exterior Hei

Résumé du contenu de la page N° 3

Universal Flat Pack Cabinet Manual What's Included Your package should contain the following items. If anything is missing or damaged, please contact Black Box at 724-746-5500 or info@blackbox.com. Box A: • (1) Top Panel • (1) Bottom Panel with Casters and Leveling Feet • (2) Frames • (4) Mounting Rails • (6) Horizontal Supports: (2) bottom, (4) middle/top • (1) Accessories Box (see below) • (1) This User's Manual (in Accessories Box) Box B: • (1) Front Glass Door • (1) Rear Vented Door • (2) S

Résumé du contenu de la page N° 4

Universal Flat Pack Cabinet Manual 3. Assembly Instructions STEP 1: Connect two frames to the top and bottom panels, then use M6 nuts to secure them in place. (16) M6 nuts STEP 2: As shown in the diagram below, align the tabs of the horizontal supports to the slots in the vertical frame members and drop into place. Install the (2) bottom horizontal supports first. They are larger than the top/middle horizontal supports and must be installed in the bottom positions to allow the vertical rails

Résumé du contenu de la page N° 5

Universal Flat Pack Cabinet Manual STEP 3: Attach the lock bases and hinge bases with M5 screws. Attach the screws at the outer end of the mounting rails. (4) mounting tabs (8) 15-mm M5 screws STEP 4: Put the two rubber pads on the corners of the front door. Then attach the front door with three latches. Repeat this procedure to attach the rear door. (1) rubber pad (4) latches (1) rubber pad Page 5

Résumé du contenu de la page N° 6

Universal Flat Pack Cabinet Manual STEP 5: Attach the two side panels to the cabinet. STEP 6: Attach the four grounding wires with M6 nuts. (4) M6 nuts (2) grounding wires (1) Label Page 6 724-746-5500 | blackbox.com

Résumé du contenu de la page N° 7

Universal Flat Pack Cabinet Manual STEP 7: Cabinet assembly is now complete. Front Back Page 7

Résumé du contenu de la page N° 8

Black Box Tech Support: FREE! Live. 24/7. Tech support the way it should be. Great tech support is just 60 seconds away at 724-746-5500 or blackbox.com. About Black Box Black Box provides an extensive range of networking and infrastructure products. You’ll find everything from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by free, live 24/7 Tech support available in 60 seconds or less. ® © Copyright 2013. Black Box Corpor