Résumé du contenu de la page N° 1
CL-110/CL-110-I ADSL2+ Router
User’s Manual
Rev: 1.5
2007/03/30
No part of this publication may be reproduced in any form by any means without the prior written permission. Other
trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective companies.
This manual currently suits for CL-110/CL-110-I.
Résumé du contenu de la page N° 2
Safety Notes Use only the type of power source indicated on the marking labels. For Installation Use only power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the device, which are intended for ventilation and proper operati
Résumé du contenu de la page N° 3
ADSL Router User Manual FCC FCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed t
Résumé du contenu de la page N° 4
Preface Thank you for choosing the Asymmetric Digital Subscriber Line (ADSL2+) Router. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL2+ allows you to have both voice and data services in use simultaneously all over one phone line. CL-110/CL-110-I ADSL2+ Router is a DSL broadband access device which allows ADSL2+ connectivity capabilities for home or office users. It supports ADSL2/ADSL2+ and is backward compatible to ADSL, even
Résumé du contenu de la page N° 5
ADSL Router User Manual RFC2684 LLC Encapsulation and VC Multiplexing over AAL5 RFC2364 Point-to-Point Protocol (PPP) over AAL5 RFC2225 Classical IP and ARP over ATM RFC2516 PPP over Ethernet: support Relay (Transparent Forwarding and Client functions) Support PPPoA or PPPoE Bridged mode (the IP address got from ISP can be passed to the user’s PC and behave as the IP address of the user’s PC.) OAM F4/F5 End-to-End/Segment Loopback Cells Bridging Features Supports self-learning br
Résumé du contenu de la page N° 6
Firmware upgrades through HTTP, TFTP, or FTP The boot loader contains very simple web page to allow the users to update the run-time firmware image. Configuration file backup and restore SNMPv1/v2 agent with MIB-II, ADSL Line MIB Unpacking Check the contents of the package against the pack contents checklist below. If any of the items is missing, then contact the dealer from whom the equipment was purchased. ADSL Router Power Adapter and Cord RJ-11 ADSL Line Cable RJ-45 Et
Résumé du contenu de la page N° 7
ADSL Router User Manual Subscription for ADSL Service To use the ADSL Router, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP: If you apply for dial-up connection, you will be given an Internet account with username and password. You will get a dynamic IP by dialing up to your ISP. Static IP address: If you apply for full-time connectivity, you may get either one stati
Résumé du contenu de la page N° 8
Résumé du contenu de la page N° 9
Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LED and connector for front and rear view of the router. Before you use/install this router, please take a look at this information first. Physical Outlook Front Panel The following illustrations show the front panel of the ADSL Router (with USB interface and without USB interface): LED Indicators The ADSL Router is equipped with five LEDs on the front panel as described in the table below (fr
Résumé du contenu de la page N° 10
Rear Panel The following figures illustrate the rear panel of your ADSL Router. 9 VAC Connector Description 9 VAC Power connector 9VAC Power switch Ethernet Ethernet RJ-45 connector USB USB connector (for the model with USB interface only) DSL RJ-11 connector
Résumé du contenu de la page N° 11
Chapter 2:System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the ADSL Router via Ethernet, the host computer must meet the following requirements: With Ethernet network interface. Must have TCP/IP installed. Set client PC with obtain an IP address automatically or set fix IP address. With a web browser installed: Internet Explorer 5.x or later. The ADSL Router is configured with the default IP address of 192.168.1.1 and s
Résumé du contenu de la page N° 12
Connecting the ADSL Router Follow the steps below to connect the related devices. Connecting the ADSL line. Connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your ADSL Router. Connect the other end of the cable to the Ethernet port of the client PC. Connect the supplied power adapter to the PWR port of your ADSL Router, and plug the other end to a power outlet.
Résumé du contenu de la page N° 13
Chapter 3: Configuration For connecting through a hub, please refer to the following diagram for an example. 9 VAC Install the USB Driver For Windows ME Run the USB installation program from the CD provided by your device package. An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB dev
Résumé du contenu de la page N° 14
An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC.
Résumé du contenu de la page N° 15
Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically. Now, the system will copy the proper files for this device. When the file copying finished, the dialog above will close. The InstallShield Wizard Complete appears, click Finish. Now the USB driver is installed properly. You can use the device. For Windows XP Run the US
Résumé du contenu de la page N° 16
When the welcome screen appears, click Next for next step. When the InstallShield Wizard Complete appears, click Finish. Plug the USB cable between your device and PC. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also verify that the device is power on. The system will detect the USB driver automatically.
Résumé du contenu de la page N° 17
Chapter 3: Configuration The system is trying to find proper driver for your device and copying the files automatically. After the file copying is finished, a completing message will appear. You can use the device now. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver installation process (see the figure below for example). To install the USB driver before connect the router to the PC, here
Résumé du contenu de la page N° 18
When the welcome screen appears, click Next for the next step. When the complete message of InstallShield Wizard appears, click Finish. Link your router and the PC with a USB cable. The system will detect the USB driver automatically.
Résumé du contenu de la page N° 19
Chapter 3: Configuration Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. After the file copying finished, a completing message will appear. You can use the router now.
Résumé du contenu de la page N° 20
Method Two – Run a silent installation. Copy the USB driver folder from the driver CD to somewhere on the PC. (In our example, the driver files are put under D:\Siemens WHQLed.) Open Start menu, key in cmd in the blank and press enter. Then click cmd. Then click the icon. Key in cmd and press Enter. When the Command Prompt screen appears, point to the driver folder on your PC, and then enter setup -s. Press enter to start silent installation. The system will install the driver
