Résumé du contenu de la page N° 1
SmartNode 4950 Series
Multi-Port T1/E1/PRI VoIP
Enterprise Gateway Router
Quick Start Guide
Sales Office: +1 (301) 975-1000
Part Number: 07MSN4950-QS, Rev. A
Technical Support: +1 (301) 975-1007
Revised: June 7, 2011 E-mail: support@patton.com
WWW: www.patton.com
Résumé du contenu de la page N° 2
• Do not open the device when the power cord is connected. For sys- tems without a power switch and without an external power adapter, line voltages are present within the device when the power cord is connected. WARNING • For devices with an external power adapter, the power adapter shall be a listed Limited Power Source The mains outlet that is utilized to power the device shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker in c
Résumé du contenu de la page N° 3
Electrostatic Discharge (ESD) can damage equipment and impair electrical circuitry. It occurs when electronic printed circuit cards are improperly handled and can result in complete or intermittent failures. Do the follow- ing to prevent ESD: CAUTION • Always follow ESD prevention procedures when removing and replac- ing cards. • Wear an ESD-preventive wrist strap, ensuring that it makes good skin contact. Connect the clip to an unpainted surface of the chassis frame to safely channel unwant
Résumé du contenu de la page N° 4
0/3 0/2 0/1 0/0 ETH 0/1 ETH 0/0 Console T1/E1 RS-232 LAN (connect to ETH 0/1) Ethernet Laptop PC Figure 1. Connecting to the PC 1. Connect the PC’s Ethernet port to LAN (ETH 0/1) port of the SmartNode 4950. The SmartNode 4950 Series is equipped with Auto-MDX Ethernet ports, so you can use straight-through or cross-over Ethernet cables for host or hub/switch connections. (See figure 1.) 2. The SmartNode comes with a built-in DHCP server to simplify configuration. Therefore, to automatica
Résumé du contenu de la page N° 5
3.2 Login 1. To access the SmartNode, start the Telnet application on your PC. Type the default IP address into the address field: 192.168.1.1. Accessing your SmartNode via a Telnet session displays the login screen. Type the factory default login: administrator and leave the password empty. Press the Enter key after the password prompt. login:administrator password: 192.168.1.1> 2. After you log in, your SmartNode will be running in operator execution mode (indicated by >
Résumé du contenu de la page N° 6
0/3 0/2 0/1 0/0 ETH 0/1 ETH 0/0 Console T1/E1 RS-232 In general, the SmartNode will connect to the network via the WAN (ETH 0/0) port. This enables the SmartNode to offer routing services to the PC hosts on LAN (ETH 0/1) port. The SmartNode 4950 Series provides an auto- MDX feature for both Ethernet ports, so you can use a straight-through or cross-over cable to connect to a host or a switch (see figure 2). LAN LAN (ETH 0/1) WAN (ETH 0/0) Network Straight-through wired or crossover cable Figu
Résumé du contenu de la page N° 7
SmartNode Series SmartWare Software Configuration Guide for information on configuring the SmartNode device. In this example we assume an TFTP server resides on the host with the IP address 172.16.1.11 and the configu- ration file named SN.cfg resides in the root directory of the TFTP server. 172.16.1.99(if-ip)[WAN]#copy tftp://172.16.1.11/SN.cfg startup- config Download...100% 172.16.1.99(if-ip)[WAN]# After you reboot the SmartNode the new startup configuration will become active. When yo
Résumé du contenu de la page N° 8
A.0 Customer and Technical Support Toll-Free VoIP support: call sip:support@patton.com with a VoIP SIP client Online support: www.patton.com E-mail support: support@patton.com—answered within 1 business day Telephone support: Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to 2200 UTC/GMT) Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800 UTC/GMT) Fax: +1 (253) 663-5693 (USA) or +41 (0)31 985 25 26 (Switzerl
Résumé du contenu de la page N° 9
B.2 Radio and TV interference The SmartNode router generates and uses radio frequency energy, and if not installed and used properly—that is, in strict accordance with the manufacturer’s instructions—may cause interference to radio and television reception. The SmartNode router have been tested and found to comply with the limits for a Class A computing device in accordance with specifications in Subpart B of Part 15 of FCC rules, which are designed to provide rea- sonable protection from su
Résumé du contenu de la page N° 10
Repairs to some certified equipment should be made by an authorized maintenance facility designated by the supplier. Any repairs or alterations made by the user to this equipment, or equipment malfunctions, may give the telecommunications company cause to request the user to disconnect the equipment. Users should ensure for their own protection that the ground connections of the power utility, telephone lines and internal metallic water pipe system, are connected together. This protection ma
Résumé du contenu de la page N° 11
Copyright statement Copyright © 2011, Patton Electronics Company. All rights reserved. The information in this document is subject to change without notice. Patton Electronics assumes no liability for errors that may appear in this document. Trademarks statement The term SmartNode is a trademark of Patton Electronics Company. All other trademarks presented in this docu- ment are the property of their respective owners. Warranty, Trademark, & Compliance Information For warranty, trademark and co
Résumé du contenu de la page N° 12
Notes ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ____________________________________________________________________ ___________
