Instruction d'utilisation Lindy 42953

Résumé du contenu de la page N° 1

USB 2.0 Link Cable


User Manual English




























LINDY No. 42953


www.lindy.com





© LINDY ELECTRONICS LIMITED & LINDY-ELEKTRONIK GMBH - FIRST EDITION (June 2005)

Résumé du contenu de la page N° 2

CONTENTS



1. Introduction----------------------------------------------------------------------------------2 2. Package Contents-------------------------------------------------------------------------2 3. Product Features--------------------------------------------------------------------------2 4. System Requirements-------------------------------------------------------------------2 5. Driver Installation (PC to PC File Transfer) ---------------------------------3
® 5.

Résumé du contenu de la page N° 3

1. Introduction Congratulations on your purchase of the LINDY USB 2.0 Link cable. This unique cable allows you to easily connect two computers via a USB port and instantly transfer files at great speed. The USB 2.0 Link cable is your fast solution for peer-to-peer file transfer between two computers via the USB port. The cable provides true plug-and- play capability while transferring files at much greater speeds than USB1.1. The SuperLink application provides a drag-and-drop user-

Résumé du contenu de la page N° 4

5. Driver Installation (PC to PC File Transfer) ® 5.1 Windows 98 Driver Installation 5.1.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.1.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cable
into PC’s USB Port until the driver is installed. ® 5.1.3

Résumé du contenu de la page N° 5

5.1.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.1.6 Plug the USB 2.0 Link cable
into an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”.



















USB 2.0 Link Cable User’s

Résumé du contenu de la page N° 6

® 5.2 Windows 98 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then please use the following un-install procedure. Attention: Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable
has been unplugged from the PC. 5.2.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”.

Résumé du contenu de la page N° 7

® 5.3 Windows ME Driver Installation 5.3.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.3.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cable
into the PC’s USB Port until the driver is installed. ® 5.3.3 Windows will install the driver to

Résumé du contenu de la page N° 8

5.3.5 Once the installation is complete, a new icon called “SuperLink” will appear on your desktop. 5.3.6 Plug the USB 2.0 Link cable
into an available USB Port on the PC, the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” in “Device Manager”.































USB 2.0 Link Cab

Résumé du contenu de la page N° 9

® 5.4 Windows ME Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable
has been unplugged from the PC. 5.4.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.4.2 Select “Only remove USB Link Adapter driver”,

Résumé du contenu de la page N° 10

® 5.5 Windows 2000 Driver Installation 5.5.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.5.2 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cable
into PC’s USB Port until the driver is installed. ® 5.5.3 Windows will install the driver

Résumé du contenu de la page N° 11

5.5.5 Once installation is complete, a new icon “SuperLink” will appear on your desktop. 5.5.6 Plug the USB 2.0 Link cable
into an available USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” within “Universal Serial Bus controllers” of “Device Manager”. USB 2.0 Link Cable User’s Manual 10

Résumé du contenu de la page N° 12

® 5.6 Windows 2000 Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable
has been unplugged from the PC. 5.6.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.6.2 Select “Only remove USB Link

Résumé du contenu de la page N° 13

® 5.7 Windows XP Driver Installation 5.7.1 Power on both computers and make sure the USB port is enabled and working properly. Insert the CD in to your CD-Rom drive. 5.7.2 Select path of “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” (D: represents CD-ROM) and double click on “Setup.exe” to install driver. Attention: Don’t plug the USB 2.0 Link cable
into PC’s USB Port until the driver is installed. ® 5.7.3 Windows will install the driver to “C:\Program Fi

Résumé du contenu de la page N° 14

5.7.5 Click on “Finish” to complete this installation. 5.7.6 After installation is complete a new icon “SuperLink” will appear on your desktop. 5.7.7 Plug the USB 2.0 Link cable
into PC’s USB Port, then “Found New Hardware Wizard” will help you to install driver. Select “Install the software automatically [Recommended]” and click “Next” to continue.

Résumé du contenu de la page N° 15

® 5.7.8 Windows will show a warning message as following, press “Continue Anyway” to go on this installation. 5.7.9 Click on “Finish” to complete this installation. 5.7.10 Plug the USB 2.0 Link cable
into a USB Port, , the pc will detect and install a new item “USB SuperLink Adapter” at “Universal Serial Bus controllers” of “Device Manager”.

Résumé du contenu de la page N° 16

® 5.8 Windows XP Driver Un-Installation If you don’t want to use this cable and want to delete the driver from the PC then just follow the un-install procedure as following. Before you go through the un-installation procedure, please make sure that the USB 2.0 Link cable
has been unplugged from the PC. 5.8.1 Select the path “D:\DRIVER\USB 2.0 LINK CABLE 42953\ WINDOWS\Super Link_Install” and double click on “Setup.exe”. 5.8.2 Select “Only remove USB Link Adapter d

Résumé du contenu de la page N° 17

6. Running the SuperLink Application Program (PC to PC File Transfer)



6.1 Windows 98, ME, Windows 2000 & Windows XP Follow the steps below on how to run the SuperLink application program: The installation of the application is similar for all four operating systems. We ® have used Windows 2000 for this example. 6.1.1 Once PC#1 and PC#2 have finished installing the driver, connect each end of the USB 2.0 Link cable
to PC#1 and PC#2. 6.1.2 Double click on the icon “Sup

Résumé du contenu de la page N° 18

6.1.5 The remote site will display “It’s busy now, please wait ….” 7. Using USB Networking (Ethernet Emulation)



® ® ® ® 7-1 Windows 98, Windows ME, Windows 2000, Windows XP Driver Installation Insert the CD in to your CD-Rom drive. Select the path “D:\DRIVER\ USB 2.0 LINK CABLE 42953\WINDOWS\Virtual Network_Install” (D: represents CD-R

Résumé du contenu de la page N° 19

8. FAQ



Q: What if the USB 2.0 Link cable
can’t be successfully installed? A: This situation is common when your USB 2.0 port is a PCI card. If your USB 2.0 PCI Card uses a Microsoft driver then please download version 5.1.2600 (used with Windows 2000 & XP) from the Microsoft Web site. Q: How do I know the two PC’s are successfully connected? A: The bottom of the screen will show “Remote Connected” on both computers. Q: Should I un-install the driver each time the cab

Résumé du contenu de la page N° 20

10. FCC Statement This device generates and uses radio frequency and may cause interference to radio and television reception if not installed and used properly. This has been tested and found to comply with the limits of a Class B computing device in accordance with the specifications in Part 15 of FCC Rules. These specifications are designed to provide reasonable protection against such interference in a residential installation. However, there is no guarantee that interference will