Résumé du contenu de la page N° 1
1420_QIG_Rev_CA.fm Page 1 Thursday, June 7, 2007 1:18 PM
Quick Installation Guide
00825-0100-4420, Rev CA
June 2007 1420 Wireless Gateway
1420 Wireless Gateway
Start
Step 1: Initial Connection for Configuration
Step 2: Basic Security and Time Configuration
Step 3: Basic Ethernet or Serial Configuration
Step 4: Mount and Connect the 1420
End
¢00825-0100-4420[¤
Résumé du contenu de la page N° 2
1420_QIG_Rev_CA.fm Page 2 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 © 2007 Rosemount Inc. All rights reserved. All marks property of owner. Emerson Process Management Rosemount Temperature GmbH Emerson Process Management Frankenstrasse 21 Rosemount Division Asia Pacific Private Limited 8200 Market Boulevard 63791 Karlstein 1 Pandan Crescent Chanhassen, MN USA 55317 Germany Singapore 128461 T (US) (800) 999-9307 T 49 (6188)
Résumé du contenu de la page N° 3
1420_QIG_Rev_CA.fm Page 3 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway STEP 1: INITIAL CONNECTION FOR CONFIGURATION To configure the 1420 Wireless Gateway, a local connection between a PC/laptop and the 1420 Wireless Gateway must be established. NOTE: If a PC/laptop from another network is used, carefully record the current IP address and other settings so the PC/laptop can be returned to its original network when configura
Résumé du contenu de la page N° 4
1420_QIG_Rev_CA.fm Page 4 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 c. Select Internet Protocol (TCP/IP), then click the Properties button d. Select the Use the following IP address button and set the IP address to 192.168.1.12 e. Set the Subnet Mask to 255.255.255.0 f. Select OK for each of the settings windows that have opened. 3. Using the supplied crossover Ethernet cable, attach your PC/laptop to the 1420’s P1 Ether
Résumé du contenu de la page N° 5
1420_QIG_Rev_CA.fm Page 5 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway 4. Open a standard web browser (Internet Explorer, Mozilla Firefox or similar). 5. Uncheck proxies (Tools>Internet Options>Connections>LAN Settings) 6. Access the 1420’s default web page at https://192.168.1.10 a. Log on as User: admin b. Password: default 5
Résumé du contenu de la page N° 6
1420_QIG_Rev_CA.fm Page 6 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 c. Click Yes to proceed through the Security Alert The 1420 Home Page will appear as shown below 6
Résumé du contenu de la page N° 7
1420_QIG_Rev_CA.fm Page 7 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway STEP 2: BASIC SECURITY AND TIME CONFIGURATION To configure the basic security of the 1420 Wireless Gateway, perform the following steps. 1. Navigate to Setup>Security>User Accounts 2. Set and confirm new passwords for each of the access levels 3. Click Submit 4. Navigate to Setup>Time 5. Select method and click Submit 7
Résumé du contenu de la page N° 8
1420_QIG_Rev_CA.fm Page 8 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 STEP 3: BASIC ETHERNET OR SERIAL CONFIGURATION To configure the 1420 for an Ethernet Network: Table 2: Ethernet Communication Settings on page 15 is available to assist in recording the necessary information. 1. Determine 1420 Ethernet Port for connecting to Ethernet Network If using a wired connection, use Port 1 (P1) IT/Process Control Network Administra
Résumé du contenu de la page N° 9
1420_QIG_Rev_CA.fm Page 9 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway STEP 3 CONTINUED... To configure the 1420 for a Serial connection: Table 4: Serial Communication Settings on page 15 is available to assist in recording the necessary information. 1. Configure 1420 Serial Communication Settings a. Access the 1420 Web Interface with Administrator access b. Navigate to Setup>Modbus>Communication c. Click Enable Modbus d. Con
Résumé du contenu de la page N° 10
1420_QIG_Rev_CA.fm Page 10 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 STEP 4: MOUNT AND CONNECT THE 1420 Integral Antenna with the 1420 on a Mast The optimal installation of the 1420 Wireless Gateway is on a pole approximately 1.8 meters above the top of the exterior wall of a building. The following hardware and tools are needed: � Pipe mount with holes spaced 3.06 inches (78 mm) apart horizontally and 11.15 inches (28
Résumé du contenu de la page N° 11
1420_QIG_Rev_CA.fm Page 11 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway STEP 4 CONTINUED... Connect to Information System 1. Wire the 1420 Primary Ethernet output or Serial Output connection to the Host System Ethernet or Serial input connections. 2. For Serial connections, connect A to A, B to B and make sure all terminations are clean and secured to avoid wiring connection problems. Figure 1. 1420 Terminal Block Diagram S
Résumé du contenu de la page N° 12
1420_QIG_Rev_CA.fm Page 12 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 PRODUCT CERTIFICATIONS Approved Manufacturing Locations Rosemount Inc. – Chanhassen, Minnesota, USA Telecommunication Compliance All wireless devices require certification to ensure that they adhere to regulations regarding the use of the RF spectrum. Nearly every country requires this type of product certification. Emerson is working with governmental a
Résumé du contenu de la page N° 13
1420_QIG_Rev_CA.fm Page 13 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway Canadian Standards Association (CSA) N6 CSA Division 2 & Dust Ignitionproof Certificate Number: See Certificate Suitable for Class I, Division 2, Groups A,B,C,D; Dust Ignitionproof for Class II, Groups E,F, and G; Suitable for Class III Hazardous Locations. Install per Rosemount drawing 01420-1011. Temperature Code: T4 (-40°C < T < 60°C) a CSA Enclosure
Résumé du contenu de la page N° 14
1420_QIG_Rev_CA.fm Page 14 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 Figure 3. Terminal and Integration Diagram 14 Serial Input DCS/PLC Card DCS / PLC HMI Serial 24 V DC Modbus Power Input Not Used Not Used ++ - S AB - + SS - Case + + - SS - POE P2 P1 Not Used Not Used (Covered) (Secondary) (Primary) For P2 and POE connectivity options, see the 1420 Wireless Gateway Manual, document Local number 00809-0100-4420. 1420 HM
Résumé du contenu de la page N° 15
1420_QIG_Rev_CA.fm Page 15 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA June 2007 1420 Wireless Gateway Table 1. Ethernet Port Locations Settings Location 1420 Ethernet Port P1 Information System Switch or Access Point Switch or Access Point Ethernet Port Table 2. Ethernet Communication Settings Setting Value Options Use Fixed IP or DHCP? Fixed or DHCP Fixed IP Address or DHCP XXX.XXX.XXX.XXX or Host Name XXXXXXX Netmask (Subnet Mask) YYY.YYY.YYY.YYY Gate
Résumé du contenu de la page N° 16
1420_QIG_Rev_CA.fm Page 16 Thursday, June 7, 2007 1:18 PM Quick Installation Guide 00825-0100-4420, Rev CA 1420 Wireless Gateway June 2007 16
