Résumé du contenu de la page N° 1
DSL-G604T
Wireless ADSL Router
User’s Guide
(February 2004)
651G604T.015
Résumé du contenu de la page N° 2
FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with this user’s guide, may cause harmful interference to radio communications. Op
Résumé du contenu de la page N° 3
TABLE OF CONTENTS ABOUT THIS USER’S GUIDE.....................................................................................I BEFORE YOU START.................................................................................................I INSTALLATION REQUIREMENTS .............................................................................I PACKING LIST ......................................................................................................... IV INTRODUCTION...........
Résumé du contenu de la page N° 4
Save Configuration Changes..............................................................................................................39 ADVANCED ROUTER MANAGEMENT ...................................................................41 UPnP ..................................................................................................................................................................42 LAN Clients..............................................................................
Résumé du contenu de la page N° 5
DSL-G604T DSL Router User’s Guide About This User’s Guide This user’s guide provides instructions on how to install the DSL-G604T ADSL Router and use it to connect a computer or Ethernet LAN to the Internet. If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set up the DSL- G604T is to insert the Installation CD into the CD-ROM drive of your computer and follow the instructions provided in the Quick Installation Guide. Before You Start Please r
Résumé du contenu de la page N° 6
DSL-G604T DSL Router User’s Guide disabled by other software (such as virus protection or web user security packages) that may be running on your computer. Ethernet Port (NIC Adapter) Any computer that uses the Router must be able to connect to it through the Ethernet port on the Router. This connection is an Ethernet connection and therefore requires that your computer be equipped with an Ethernet port as well. Most notebook computers are now sold with an Ethernet port already installed.
Résumé du contenu de la page N° 7
DSL-G604T DSL Router User’s Guide Information you will need from your ADSL service provider: This is the Username used to log on to your ADSL service Record info here provider’s network. It is commonly in the form - Username user@isp.com. Your ADSL service provider uses this to identify your account. This is the Password used, in conjunction with the Username Password above, to log on to your ADSL service provider’s network. This is used to verify the identity of your account. Thi
Résumé du contenu de la page N° 8
DSL-G604T DSL Router User’s Guide This is the subnet mask used by the DSL-G604T, and will be LAN Subnet Mask for the used throughout your LAN. The default subnet mask is DSL-G604T 255.0.0.0. This can be changed later. Information you will need about your LAN or computer: Record info here If your computer has an Ethernet NIC, you can connect the DSL-G604T to this Ethernet port using an Ethernet cable. Ethernet NIC You can also use the Ethernet port on the DSL-G604T to connect to othe
Résumé du contenu de la page N° 9
1 Introduction This section provides a brief description of the Router, its associated technologies and a list of Router features. Router Description and Operation The DSL-G604T ADSL Router is designed to provide a simple, cost-effective and secure ADSL Internet connection for wired (Ethernet) and wireless (802.11g) stations on your network. The DSL-G604T combines high-speed ADSL connection technology, TCP/IP routing and 802.11g wireless connectivity in one compact unit. The Router is
Résumé du contenu de la page N° 10
Router Features The DSL-G604T ADSL Router utilizes the latest ADSL enhancements to provide a reliable Internet portal suitable for most small to medium sized offices. DSL-G604T advantages include: • PPP (Point-to-Point Protocol) Security – The DSL-G604T ADSL Router supports PAP (Password Authentication Protocol) and CHAP (Challenge Handshake Authentication Protocol) for PPP connections. • DHCP Support – Dynamic Host Configuration Protocol automatically and dynamically assigns al LAN IP s
Résumé du contenu de la page N° 11
Standards Compatibility and Compliance The DSL-G604T complies with or is compatible with the following standards as recognized by their respective agencies. • ITU G.992.1 (G.DMT) compliant • ITU G.992.2 (G.lite “Splitterless ADSL”) compliant • ITU-T Rec. I.361 compliant • RFC 791 Internet Protocol compliant • RFC 792 UDP compliant • RFC 826 Address Resolution Protocol compliant (ARP) compliant • RFC 1058 Routing Information Protocol (RIP) compliant • RFC 1334 PPP Authentication Prot
Résumé du contenu de la page N° 12
Packing List Open the shipping carton and carefully remove all items. Make sure that you have the items listed here. 1. One DSL-G604T 802.11g Wireless ADSL Ethernet Router 2. One screw-on antenna 3. One CD-ROM containing the User’s Guide 4. One twisted-pair telephone cable used for ADSL connection 5. One straight-through Ethernet cable 6. One AC power adapter suitable for your electric service 7. One Quick Installation Guide Front Panel Display Place the Router in a location that p
Résumé du contenu de la page N° 13
Rear Panel Connections All cable connections to the Router are made at the rear panel. Connect the power adapter here to power on the Router. Use the Reset button to restore the settings to the factory default values in the next chapter for instructions on using the reset button). Antenna ADSL port, connect ADSL cable here Ethernet ports, connect Ethernet cable here Factory Reset button Power cord connects here Note The Router m
Résumé du contenu de la page N° 14
Introduction to 802.11b Wireless The IEEE 802.11b standard is the most widely used standard for wireless LANs today. A wireless LAN (WLAN) is a cellular computer network that transmits data using radio signals instead of cables. WLAN technology is commonly used on home, small office and large corporate networks. WLAN devices have a high degree of mobility and flexibility that allow networks to be quickly set up or dismantled and allow them to roam freely throughout the network. Wireless
Résumé du contenu de la page N° 15
in its broadcast range. WLAN nodes transmit digital data using FM (frequency modulation) radio signals. WLAN devices generate a carrier wave and modulate this signal using various techniques. In this way, digital data can then be superimposed onto the carrier signal. This radio signal carries data to WLAN devices within range of the transmitting device. The antennae of WLAN devices listen for and receive the signal. The signal is demodulated and the transmitted data extracted. The transmis
Résumé du contenu de la page N° 16
2 Hardware Installation The DSL-G604T functions on three separate networks: a wired Ethernet LAN, a wireless LAN and a wired ADSL WAN. Placement of the Router must take into account the fact that it is connected to these three networks with three types of media. Ethernet cables connect the Router to computers and network devices and the ADSL line connects it to a wall socket. In addition, the device must be near an AC wall outlet for power. How to accommodate these wired connections is o
Résumé du contenu de la page N° 17
Power on Router CAUTION: The Router must be used with the power adapter included with the device. To power on the Router: 1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. 2. You should see the Power LED indicator light up and remain lit. The Status LED should light solid green and begin to blink after a few seconds. 3. If the Ethernet port is connected to a working device,
Résumé du contenu de la page N° 18
Network Connections Network connections are provided through the ADSL port and the four Ethernet ports on the back of the Router. See the Rear Panel diagram above and the illustrations below for examples. Connect ADSL Line Use the ADSL cable included with the Router to connect it to a telephone wall socket or receptacle. Plug one end of the cable into the ADSL port (RJ-11 receptacle) on the rear panel of the Router and insert the other end into the RJ-11 wall socket. If you are using a
Résumé du contenu de la page N° 19
Computer to Router Connection You can connect the Router directly to a 10/100BASE-TX Ethernet adapter card (NIC) installed on a PC using the Ethernet cable provided as shown in this diagram. Power On Router To power on the Router: 1. Insert the AC Power Adapter cord into the power receptacle located on the rear panel of the Router and plug the adapter into a suitable nearby power source. 2. You should see the Power LED indicator light up and remain lit. Th
Résumé du contenu de la page N° 20
3 Basic Router Configuration The first time you setup the Router it is recommended that you configure the WAN connection using a single computer making sure that both the computer and the Router are not connected to the LAN. Once the WAN connection is functioning properly, you may continue to make changes to Router configuration including IP settings and DHCP setup. This chapter is concerned with using your computer to configure the WAN connection. The following chapter describes the var
