Instruction d'utilisation Cisco Systems 7600 Series

Instruction d'utilisation pour le dispositif Cisco Systems 7600 Series

Dispositif: Cisco Systems 7600 Series
Catégorie: Routeur réseau
Fabricant: Cisco Systems
Dimension: 0.83 MB
Date d'addition: 11/8/2014
Nombre des pages: 74
Imprimez l'instruction

Téléchargez

Comment utiliser?

Notre objectif consiste à vous assurer le plus rapide accès au contenu de l'instruction d'utilisation du dispositif Cisco Systems 7600 Series. En utilisant l'aperçu en ligne vous pouvez parcourir le sommaire et passer à la page où vous trouverez la résolution de votre problème avec Cisco Systems 7600 Series.

Pour votre confort

Si regarder l'instruction Cisco Systems 7600 Series directement sur la page n'est pas confortable pour vous, vous pouvez profiter de deux solutions possibles:

  • Exploration au mode de plein écran - pour analyser l'instruction d'une manière commode (sans l'avoir téléchargée sur votre ordinateur) vous pouvez utiliser le mode d'exploration en plein écran. Pour démarrer l'exploration de l'instruction Cisco Systems 7600 Series en plein écran, utilisez le bouton Plein écran.
  • Téléchargement sur l'ordinateur - vous pouvez aussi télécharger l'instruction Cisco Systems 7600 Series sur votre ordinateur et la sauvegarder dans vos ressources. Si vous n'avez pas envie de gaspiller votre espace disque, vous pouvez toujours télécharger cette instruction du ManualsBase dans l'avenir.
Cisco Systems 7600 Series Manuel d'utilisation - Online PDF
Advertisement
« Page 1 of 74 »
Advertisement
Version imprimée

Beaucoup de gens préfèrent de lire les documents dans la version imprimée et non pas sur l'écran. L'option d'impression de l'instruction est aussi prévue et vous pouvez en profiter en cliquant le lien ci-dessus - Imprimez l'instruction. Il n'est pas nécessaire d'imprimer toute l'instruction Cisco Systems 7600 Series - on peut choisir des pages. Economisez le papier.

Résumés

Vous trouverez ci-dessous les annonces des contenus qui se trouvent sur les pages suivantes de l'instruction de Cisco Systems 7600 Series. Si vous voulez parcourir rapidement le contenu des pages suivantes de l'instruction, vous pouvez en profiter.

Résumés du contenu
Résumé du contenu de la page N° 1

Guide to Supported Hardware for Cisco 7600
Series Routers with Cisco IOS Release 12.2SR
This publication lists the supported hardware for Cisco 7600 series routers with Cisco IOS Release
12.2SR.
Use this publication with the Release Notes for Cisco IOS Release 12.2SRA on the Cisco 7600 Series
Routers.
Contents
This publication contains these sections:
• Document Revision History, page 2
 Supported Hardware, page 3
 Unsupported Hardware, page 66
 Related Documentation, page 68
 Obtaining D

Résumé du contenu de la page N° 2

Document Revision History Document Revision History Revision Date Change Summary OL-10362-6 May, 2008 Added the following for Cisco IOS release 12.2(33)SRC1:  SPA-4XT-Serial SPA support on SIP-200  Additional DWDM XFP support for ES20 line card, SIP-400, and SIP-600 OL-10362-5 April, 2008 Added the following for Cisco IOS release 12.2(33)SRB3:  DWDM XFP support on Cisco 7600 ES20 line card and SIP-600  SFP-GE-T support on Cisco 7600 ES20 line card, SIP-400, and SIP-600  CWDM SFP support

Résumé du contenu de la page N° 3

Supported Hardware Revision Date Change Summary OL-10362-2 February, 2007 Added the following for Cisco IOS release 12.2SRB:  RSP 720  Policy Feature Card 3C  Policy Feature Card 3CXL  Distributed Forwarding Card 3CXL  SFP-GE-S, SFP-GE-L, SFP-GE-Z  1-Port and 24-Port Channelized CEoP SPAs  Ethernet Services 20G line cards  Application Control Engine (ACE) Module  Service Application Module for IP  6000 W DC power supply  Cisco 7609-S router chassis OL-10362-1 May, 2006 Initial version

Résumé du contenu de la page N° 4

Supported Hardware  Enhanced FlexWAN Module Port Adapters, page 49  Service Modules, page 53  Fan Trays, page 58  Power Supplies, page 59  Chassis, page 60 Note  Use the values in the “Power Required” column to determine the exact power requirements for your configuration to ensure that you are within the power budget.  Daughtercard power is shown separately.  Enter the show power command to display current system power usage. Supervisor Engines  Supervisor Engine 720, page 4  Superv

Résumé du contenu de la page N° 5

Supported Hardware Supervisor Engine 720 Common Features  Integrated 720-Gbps Switch Fabric  64-MB bootflash device  2 CompactFlash Type II slots (disk0 and disk1) Note Some Supervisor Engine 720 Release 12.2SR images are larger than the bootflash device and must be stored on a CompactFlash card.  Two Ethernet uplink ports: – 1-MB packet buffer per port – Port 1—Gigabit Ethernet SFP – Port 2—Configurable as Gigabit Ethernet SFP or 10/100/1000 Mbps RJ-45  QoS port architecture (Rx/Tx): 1p1

Résumé du contenu de la page N° 6

Supported Hardware Supervisor Engine 720 with PFC3B Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-SUP720-3B 7.50 A@42 V Supervisor Engine 720 with PFC3B: 12.2(33)SRA  512-MB DRAM  Policy Feature Card 3B (PFC3B); see the “RSP720-3C-10GE” section on page 10  Multilayer Switch Feature Card 3 (MSFC3): – 512-MB DRAM – 64-MB bootflash Note  There are no memory-only upgrade options for WS-SUP720-3B.  Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720-

Résumé du contenu de la page N° 7

Supported Hardware  These service modules: – WS-SVC-AON-1-K9—Application-Oriented Networking Module – WS-SVC-AGM-1-K9—Anomaly Guard Module – WS-SVC-ADM-1-K9—Traffic Anomaly Detector Module – WS-SVC-MWAM-1—Multi-Processor WAN Application Module  Supervisor Engine 32 does not support these software features and commands: – Protocol independent multicast (PIM) snooping designated-router flooding configurability – NetFlow version 9 – Egress multicast replication – Multicast replication mode det

Résumé du contenu de la page N° 8

Supported Hardware  QoS port architecture (Rx/Tx) is 1p1q4t/1p2q2t RSP720-3C-GE Product ID Power Minimum (append “=” for spares) Required Product Description Software Version RSP720-3C-GE 6.66 A@42 V Route Switch Processor 720 with PFC3C: 12.2(33)SRB  Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45  Integrated 720-Gbps switch fabric  PFC3C and MSFC4 with 512

Résumé du contenu de la page N° 9

Supported Hardware RSP720-3CXL-GE Product ID Power Minimum (append “=” for spares) Required Product Description Software Version RSP720-3CXL-GE 7.33 A@42 V Route Switch Processor 720 with PFC3CXL: 12.2(33)SRB  Two Gigabit Ethernet uplink ports: port 1 supports a 1-Gbps small form pluggable (SFP) module; port 2 is configurable with either a 1-Gbps SFP module or a 10/100/1000-Mbps RJ-45  Integrated 720-Gbps switch fabric  PFC3CXL (high-capacity) and MSFC4 with 512-MB bootflash, 4-MB NVRAM

Résumé du contenu de la page N° 10

Supported Hardware RSP720-3C-10GE Product ID Power Minimum (append “=” for spares) Required Product Description Software Version RSP720-3C-10GE 7.33 A@42 V Route Switch Processor 720 with uplink ports: 12.2(33)SRC  Two 10 Gigabit Ethernet (10-GE) uplink ports support 10-Gbps X2 modules  Three Gigabit Ethernet (1-GE) uplink ports: two ports support 1-Gbps small form-factor pluggable (SFP) module; one port supports 10/100/1000-Mbps RJ-45 connector  Integrated 720-Gbps switch fabric  PFC3

Résumé du contenu de la page N° 11

Supported Hardware RSP720-3CXL-10GE Product ID Power Minimum (append “=” for spares) Required Product Description Software Version RSP720-3CXL-10GE 7.33 A@42 V Route Switch Processor 720 with PFC3CXL: 12.2(33)SRC  Two 10 Gigabit Ethernet (10-GE) uplink ports support 10-Gbps X2 modules  Three Gigabit Ethernet (1-GE) uplink ports: two ports support 1-Gbps small form-factor pluggable (SFP) module; one port supports 10/100/1000-Mbps RJ-45 connector  Integrated 720-Gbps switch fabric  PFC3C

Résumé du contenu de la page N° 12

Supported Hardware Policy Feature Cards  Policy Feature Card Guidelines and Restrictions, page 12  Policy Feature Card 3BXL, page 13  Policy Feature Card 3B, page 13  Distributed and Centralized Forwarding Cards, page 14 Policy Feature Card Guidelines and Restrictions  The PFC3 supports a theoretical maximum of 64,000 MAC addresses (32,000 MAC addresses recommended maximum).  You cannot use one type of PFC3 (PFC3BXL or PFC3B) on one supervisor engine and a different type on the other su

Résumé du contenu de la page N° 13

Supported Hardware Policy Feature Card 3BXL Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6K-PFC3BXL 2.57 A@42 V Policy Feature Card 3BXL (PFC3BXL) Supported only with Supervisor Engine 720 12.2(33)SRA Note  There are no memory upgrade options for WS-F6K-PFC3BXL.  Use WS-F6K-PFC3BXL= to upgrade a WS-SUP720 or WS-SUP720-3B with a PFC3BXL. WS-F6K-PFC3BXL= includes 1 GB memory upgrades for the Supervisor Engine 720 and the MSFC3. Refer to thi

Résumé du contenu de la page N° 14

Supported Hardware Policy Feature Card 3CXL Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6K-PFC3CXL 2.57 A@42 V Policy Feature Card 3CXL (PFC3CXL) Supported only with RSP 720 12.2(33)SRB Note  There are no memory upgrade options for WS-F6K-PFC3BXL. Distributed and Centralized Forwarding Cards  Centralized Forwarding Card (WS-X6700-CFC), page 14  Distributed Forwarding Card 3BXL, page 15  Distributed Forwarding Card 3B, page 16  Distribu

Résumé du contenu de la page N° 15

Supported Hardware Distributed Forwarding Card 3BXL  WS-F6700-DFC3BXL, page 15  WS-F6K-DFC3BXL, page 15 WS-F6700-DFC3BXL Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3BXL 3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note  WS-F6700-DFC3BXL uses memory that is installed on the switching module.  Refer to this publication for information about

Résumé du contenu de la page N° 16

Supported Hardware Distributed Forwarding Card 3B  WS-F6700-DFC3B, page 16  WS-F6K-DFC3B, page 16 WS-F6700-DFC3B Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3B 3.00 A@42 V Distributed Forwarding Card 3B (DFC3B) for use on CEF720 modules Supported only with Supervisor Engine 720 12.2(33)SRA Note  WS-F6700-DFC3B uses memory that is installed on the switching module.  Refer to this publication for information about WS-F6700-DFC3B

Résumé du contenu de la page N° 17

Supported Hardware Distributed Forwarding Card 3CXL Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3CXL 2.35 A@42 V Distributed Forwarding Card 3CXL (DFC3CXL) for use on CEF720 modules Supported with Supervisor Engine 720 and Route 12.2(33)SRB Switch Processor 720 Distributed Forwarding Card 3C Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-F6700-DFC3C 1.65 A@42 V Distributed Forward

Résumé du contenu de la page N° 18

Supported Hardware 10-Gigabit Ethernet Switching Modules Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-X6704-10GE 6.28 A@42 V 4-port 10-Gigabit Ethernet XENPAK  CEF720 with WS-X6700-CFC (adds 0.75 A@42 V)  dCEF720 with WS-F6700-DFC3BXL (adds 3.30 A@42 V)  dCEF720 with WS-F6700-DFC3B (adds 3.00 A@42 V)  Supports egress multicast replication  QoS port architecture (Rx/Tx): – With DFC3: 8q8t/1p7q8t – With CFC: 1q8t/1p7q8t  Number of ports

Résumé du contenu de la page N° 19

Supported Hardware Product ID Power Minimum (append “=” for spares) Required Product Description Software Version WS-X6502-10GE 3.30 A@42 V 1-port 10-Gigabit Ethernet  With Supervisor Engine 720: – dCEF256 with WS-F6K-DFC3BXL (adds 1.47 A@42 V) – dCEF256 with WS-F6K-DFC3B (adds 1.67 A@42 V)  QoS port architecture (Rx/Tx): 1p1q8t/1p2q1t  Number of ports: 1 Number of port groups: 1 Port ranges per port group: 1 port in 1 group With Supervisor Engine 720 12.2(33)SRA With Supervisor Engine 32

Résumé du contenu de la page N° 20

Supported Hardware Product ID Power Minimum (append “=” for spares) Required Product Description Software Version X2-10GB-LR 12.2(33)SRC Note  To configure WS-X6708-10GE port oversubscription, refer to the hw-module oversubscription command in the command reference at this URL: http://www.cisco.com/en/US/products/ps6922/prod_command_reference_list.html  Installation of a WS-X6708-10GE switching module in a chassis other than the following prevents operation at levels that are fully NEBS-com


Instructions pareilles
# Instruction d'utilisation Catégorie Téléchargez
1 Cisco Systems 10/100 16-Port VPN Router RV016 Manuel d'utilisation Routeur réseau 32
2 Cisco Systems 1005 Manuel d'utilisation Routeur réseau 10
3 Cisco Systems 10005 Manuel d'utilisation Routeur réseau 1
4 Cisco Systems 12000 GSR Manuel d'utilisation Routeur réseau 3
5 Cisco Systems 10700 Manuel d'utilisation Routeur réseau 6
6 Cisco Systems 10000 Manuel d'utilisation Routeur réseau 0
7 Cisco Systems 10008 Manuel d'utilisation Routeur réseau 0
8 Cisco Systems 12012 Manuel d'utilisation Routeur réseau 0
9 Cisco Systems 12000 Series Manuel d'utilisation Routeur réseau 8
10 Cisco Systems 12404 Manuel d'utilisation Routeur réseau 1
11 Cisco Systems 10720 Manuel d'utilisation Routeur réseau 0
12 Cisco Systems 12406 series Manuel d'utilisation Routeur réseau 0
13 Cisco Systems 12006 series Manuel d'utilisation Routeur réseau 0
14 Cisco Systems 12406 Manuel d'utilisation Routeur réseau 0
15 Cisco Systems 1300 Manuel d'utilisation Routeur réseau 44
16 Sony BKS-R3202/R3210/R3220 Manuel d'utilisation Routeur réseau 77
17 Sony DVS-V3232B/V3232M Manuel d'utilisation Routeur réseau 3
18 Sony BVS-V3232 Manuel d'utilisation Routeur réseau 8
19 Sony DMX-WL1 Manuel d'utilisation Routeur réseau 6
20 Sony BVS-A3232 Manuel d'utilisation Routeur réseau 6