Résumé du contenu de la page N° 1
BiPAC 5210S
Dual-Port
ADSL2+ Modem/Router
User’s Manual
Résumé du contenu de la page N° 2
Chapter 1 ................................................................................................ 1 1.1 Introducing the BiPAC 5210S ................................................ 1 1.2 Features of the BiPAC 5210S................................................ 3 Chapter 2 ................................................................................................ 6 2.1 Important note for using the BiPAC 5210S ............................ 6 2.2 Package Contents ...............
Résumé du contenu de la page N° 3
Chapter 1 Introduction the BiPAC 5210S 1.1 Introducing the BiPAC 5210S Welcome to the BiPAC 5210S. Your router is an “all-in-one” unit, combining an ADSL modem, ADSL router and Ethernet network switch, providing everything you need to get the machines on your network connected to the Internet over your ADSL broadband connection. The BiPAC 5210S complies with ADSL2+ standards for worldwide deployment and supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It is
Résumé du contenu de la page N° 4
the services that outside users can access. For example, to ensure that games and other Internet applications will run properly, user can open some specific ports for outside users to access internal services in network. Integrated DHCP (Dynamic Host Control Protocol) services, client and server, allow multiple users to get their IP addresses automatically on boot up from the product. Simply set local machines as a DHCP client to accept a dynamically assigned IP address from DHCP server
Résumé du contenu de la page N° 5
1.2 Features of the BiPAC 5210S ADSL Multi-Mode Standard supports downstream rates of up to 24 Mbps and upstream rates of up to 1 Mbps. It also supports rate management that allows ADSL subscribers to select an Internet access speed suiting their needs and budgets. It is compliant with Multi-Mode standard (ANSI T1.413, Issue 2; G.dmt(G.992.1); G.lite(G992.2)), G.hs (G994.1), G.dmt.bis (G.992.3), G.dmt.bisplus (G.992.5)). The Annex A and B are supported in different H/W platforms. Fas
Résumé du contenu de la page N° 6
Supports simple firewall with NAT technology and provides option for blocking access from Internet, like Telnet, FTP, TFTP, WEB, SNMP and IGMP. Domain Name System (DNS) relay Provides an easy way to map the domain name (a friendly name for users such as www.yahoo.com) and IP address. When a local machine sets its DNS server with this router’s IP address, every DNS conversion request packet from the PC to this router will be forwarded to the real DNS in the outside network. Dynam
Résumé du contenu de la page N° 7
RIP1/2 Routing Supports RIP1/2 routing protocol for routing capability. Simple Network Management Protocol (SNMP) It is an easy way to remotely manage the router via SNMP. Web based GUI Supports web based GUI for configuration and management. It is user-friendly and comes with on-line help. It also supports remote management capability for remote users to configure and manage this product. Firmware Upgradeable Device can be upgraded to the latest firmware through the WEB
Résumé du contenu de la page N° 8
Chapter 2 Installing the BiPAC 5210S 2.1 Important note for using the BiPAC 5210S Do not use the BiPAC 5210S in high humidity or high temperatures. Do not use the same power source for the BiPAC 5210S as other equipment. Do not open or repair the case yourself. If the BiPAC 5210S is Warning too hot, turn off the power immediately and have it repaired at a qualified service center. Avoid using this product and all accessories outdoors. Place the BiPAC 5210S
Résumé du contenu de la page N° 9
2.3 The Front LEDs LED Meaning 1 PPP : Lit steady when there is a PPPoA / PPPoE connection. 2 ADSL: Lit when successfully connected to an ADSL DSLAM (“linesync”) 3 USB: Lit when the USB port is connected to the PC and working properly Lit when connected to an Ethernet device. 4 LAN Port : Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 5 SYS : Lit when the system is ready. 6 PWR : Lit when power is ON. 7
Résumé du contenu de la page N° 10
2.4 The Rear Ports 6 5 4 3 1 2 Port Meaning Power Switch 1 Power ON/OFF switch POWER 2 Connect the supplied power adapter to this jack. After the device is powered on, press it to reset the device or restore to factory default settings. 3 RESET 0-3 seconds: reset the device 6 seconds above: restore to factory default settings (this is used when you can not login to the router, e.g. forgot the password) Connect a UTP Ethernet cable (Cat-5 or Cat-5e) to the LAN ports
Résumé du contenu de la page N° 11
2.5 Cabling Through USB Port The product can be used as a Network Adapter on your PC. That means you do not have to install a network adapter first on your PC before connecting the ADSL Modem/Router. Just connect the supplied USB cable to the USB port of the ADSL2+ Modem/Router and connect the other end to the PC. Make sure that your ADSL Modem/Router and PC are turned on. On the front of the product is a bank of LEDs. As a first check, please verify that the PWR, SYS, USB and ADSL LEDs
Résumé du contenu de la page N° 12
Chapter 3 Basic Installation The router can be configured with your web browser. A web browser is included as a standard application in the following operating systems: Windows 98/NT/2000/XP/Me, etc. The product provides a very easy and user-friendly interface for configuration. 3.1 Before Configuration PCs must have an Ethernet interface installed properly and be connected to the router either directly or through an external repeater hub, and have TCP/IP installed and configured to
Résumé du contenu de la page N° 13
Installing the USB Driver If you connect the device through USB port instead of Ethernet port, for the first time the USB cable is connected to the PC, Windows will automatically detect the device. Follow the steps to install the USB driver. For Windows XP & 2000 ： 1. Start Windows. Then insert the installation CD into the CD-ROM drive. In next window, to specify the driver directory such as “G:\USB Driver\setupXP2K_En_De_Fi” and to continue. 2. To choose the setup language. ”
Résumé du contenu de la page N° 14
3. Then follow screen. 4. To click the type of setup you prefer, then click Next >. 12
Résumé du contenu de la page N° 15
5. To setup enough information of coping the program files then click Next >. 6. Please plug USB cable into ADSL USB Modem. 13
Résumé du contenu de la page N° 16
7. Then, click “Finish”. 14
Résumé du contenu de la page N° 17
For Windows 98 & Me ： 1. Start Windows. Then insert the installation CD into the CD-ROM drive. In next window, to specify the driver directory such as “G:\USB Driver\setup98 Me_En_De_Fi” and to continue. 2. To choose the setup language. ”and click “Next >”. (There are three languages that user can choose: English. German and French) 15
Résumé du contenu de la page N° 18
3. Then follow screen. 4. To click the type of setup you prefer, then click Next >. 16
Résumé du contenu de la page N° 19
5. To setup enough information of coping the program files. 6. Select “Want to restart my computer now” and click OK> 17
Résumé du contenu de la page N° 20
7. Then, click “Finish”. 18
