Résumé du contenu de la page N° 1
© Copyright 2000. Black Box Corporation. All rights reserved.
1000 Park Drive • Lawrence, PA 15055-1018 • 724-746-5500 • Fax 724-746-0746
Résumé du contenu de la page N° 2
AUGUST 2000 SM700A SM707C SM722C SM701A SM708C SM723C SM701C SM709C SM724C SM702C SM710C SM730 SM705C SM720C SM740 SM706C SM721C SM750A Pro Switching System RS-232 RS-530 RS-232 RS-530 V.35 RS-232 RS-232 V.35 RS-232 RS-530 RS-530 RS-530 RS-232 V.35 RS-232 TD TD TD TD TD TD TD TD TD TD TD TD TD TD TD ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM ALM GANG RD RD RD RD RD RD RD RD RD RD RD RD RD RD RD A A A A A A A A A A A A A A A A RTS RTS RTS RTS RTS RTS RTS RTS RTS RTS RTS RTS RTS RTS R
Résumé du contenu de la page N° 3
Résumé du contenu de la page N° 4
FCC INFORMATION FEDERAL COMMUNICATIONS COMMISSION AND INDUSTRY CANADA RADIO FREQUENCY INTERFERENCE STATEMENTS This equipment generates, uses, and can radiate radio frequency energy and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart J of Part 15 of FCC rules, w
Résumé du contenu de la page N° 5
PRO SWITCHING SYSTEM NORMAS OFICIALES MEXICANAS (NOM) ELECTRICAL SAFETY STATEMENT INSTRUCCIONES DE SEGURIDAD 1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado. 2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura. 3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas. 4. Todas las instrucciones de operación y uso deben ser seguidas. 5. El a
Résumé du contenu de la page N° 6
NOM STATEMENT 12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada. 13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato. 14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante. 15. En caso de existir, una antena ext
Résumé du contenu de la page N° 7
PRO SWITCHING SYSTEM TRADEMARKS USED IN THIS MANUAL VT100™ is a trademark of Digital Equipment Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners. 4
Résumé du contenu de la page N° 8
CONTENTS Contents Chapter Page 1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 Cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.2 Entire Pro Switching System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 2. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 2.1 System Architecture . . . . . . . . . .
Résumé du contenu de la page N° 9
PRO SWITCHING SYSTEM Chapter Page 3.1.3 Four-Cavity Patching . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 3.2 Monitoring Bus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 3.3 Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 4. Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.1 Rackmount Chassis . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 10
CONTENTS Chapter Page 6.1.2 HP OpenView User’s Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 70 6.1.3 Network Map and Database . . . . . . . . . . . . . . . . . . . . . . . . . . 70 6.1.4 Map Concepts and Structure . . . . . . . . . . . . . . . . . . . . . . . . . 70 6.1.5 Map Levels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 6.2 Initializing PC Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 6.2.1 Basic Informa
Résumé du contenu de la page N° 11
PRO SWITCHING SYSTEM Chapter Page Appendix B. Pin Configurations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141 Appendix C. HDX2000L Library . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 C.1 Functions List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 C.2 Parameters List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 C.3 Sample Code. . . . . . . . . . . . . . . . . . . . . .
Résumé du contenu de la page N° 12
CHAPTER 1: Specifications 1. Specifications 1.1 Cards Connectors—SM720C: (3) DB25 female; SM721C: (3) M/34 female; SM722C: (3) DB15 female; SM723C: (3) RJ-11; SM724C: (3) RJ-45 Indicators—SM705C-SM707C: (8) LEDs for transition activity Power—From the Rack Chassis 1.2 Entire Pro Switching System Protocols—Transparent to all protocols and speeds Control Options—HP OpenView Windows, SNMP, or watchdog timer Control Communication—RS-232/V.24; 1200 to 9600 baud; 7 data bits, even parity, 1 or 2 stop
Résumé du contenu de la page N° 13
PRO SWITCHING SYSTEM Switching—RS-232/V.24: 3 conductors, pins 1 (shield ground) and 7 (signal ground) are not switched; V.35: 19 conductors: RTS (C), CTS (D), DSR (E), DCD (F), DTR (H), LL (J), TM (K), TP (L), RL (BB), TD (P, S), RD (R, T), RC (V, X), EC (U, W), TC (Y, AA), pins A (shield ground) and B (signal ground) are not switched; RS-530: 23 conductors, pins 1 (shield ground) and 7 (signal ground) are not switched; Other cards: All conductors are switched Patching—RS-232/V.24: 23 conducto
Résumé du contenu de la page N° 14
CHAPTER 2: Introduction 2. Introduction The Pro Switching System is an advanced system for managing data lines and data networks. It has a broad range of capabilities and can adapt to small and large applications. Once you set up the system, it provides “hands-free” management. The predefined switching and backup tasks are performed automatically. If a line generates an alarm, the system reroutes the data through a backup line and reports the problem. Also, it lets you monitor and test any line
Résumé du contenu de la page N° 15
PRO SWITCHING SYSTEM Control/Software: • SNMP • PC (HP OpenView Windows) • ASCII character strings • Async terminal menus • Central control of remote test equipment • Provides database including network performance evaluation The rest of this chapter describes the features of the Pro Switching System in more detail. It also provides sample applications at the end of the chapter. Read this chapter for a more comprehensive understanding of the system. 2.1 System Architecture The System architectur
Résumé du contenu de la page N° 16
CHAPTER 2: Introduction The line level has the following capabilities: • A/B switching • Two-, three-, and four-cavity patching (Refer to Chapter 3, Functions, for descriptions.) At the Rack level, the line cards are mounted in racks. Each rack has its own microprocessor-based control card. The rack level has line bridging and breaking via monitoring bus. (Refer to Chapter 3, Functions, for descriptions.) Figure 2-2. Fully Loaded Rack. At the Site level, each rack control card communicates with
Résumé du contenu de la page N° 17
PRO SWITCHING SYSTEM Network Figure 2-3. Site Level. • system health check • database report generation • system security functions (software and hardware pass codes) • multiple site management (up to 256 racks per site; up to 256 sites per system) (Refer to Chapter 6, Operation, for descriptions.) 2.2 Hardware Features 2.2.1 TWO-PART CARD DESIGN A unique two-part card design provides flexibility. The front card (front-inserted) plugs into the rear card (rear-inserted) (see Figure 2-4). Together
Résumé du contenu de la page N° 18
You can insert and remove front cards without removing rear cards or cables. Figure 2-4. Front and Rear Cards. 2.2.2 FRONT-REAR CARD COMBINATIONS Each front card is compatible with a specific rear card. 2.2.3 SUPPORTED INTERFACES The system supports the following interfaces: RS-232/V.24, V.35, RS-530, DB15, RJ- 11, RJ-45. 2.2.4 SUPPORTED CONNECTORS The system supports these connectors: DB25, V.35 “M” type, DB15, RJ-11, RJ-45. Figure 2-5 illustrates the mixing of connectors in a rack. 15
Résumé du contenu de la page N° 19
PRO SWITCHING SYSTEM C C O D O N I M T G M R I A A A O T I L A N L A A A A A A A A A A 1 A1 A2 A N A A3 A L O C G A4 O C MON M O BUS M N B1 T B B B O R U O A B2 T L U X B B B B B B B B B B B3 2 P O B4 R T C1 FUSE RATING: T3.0A B 250V~ONLY C2 P C3 O W E COM COM COM C4 R C C C C C C C C C C 1 O O O O O O O O O O M M M M M M M M M M 100-240V 50-60HZ P O W E R C 2 O M Figure 2-5. Mixing Connectors in a Rack. 2.2.5 LINE CARD SWITCHES AND INDICATORS Each Switching card has a switch on the front panel
Résumé du contenu de la page N° 20
CHAPTER 2: Introduction (Refer to Chapter 4, Components, for a full description of control card switches and LEDs.) Figure 2-6. Control Card Switches and Indicators. 2.3 System Management Features 2.3.1 HP OPENVIEW WINDOWS GRAPHIC INTERFACE Pro Switching System software running on a PC under HP OpenView for Windows mediates System Management. OpenView is an open software product, allowing you to manage devices from different vendors. It allows you to create a map of the network using a supplied
