Instruction d'utilisation Buffalo Technology Power Over Ethernet Receiver WLE-POE-R33

Résumé du contenu de la page N° 1

Power Over Ethernet Receiver
Connecting to your
Power-Over-Ethernet Receiver
(WLE-POE-R33 / WLE-POE-R7)
The WLE-POE-R33/R7 Adapter is an adapter
that supplies power to the AirStation via a Power
Supply Adapter (such as the WLE-POE-S). Using
this product enables the AirStation to be used in
locations that are not provided with a nearby power
supply. The WLE-POE-R33/R7 Adapter can be
installed on the AirStation Wall Mounting Kit
(WLE-WK / WLE-WK33), which are sold
separately.
■ NOTE: The

Résumé du contenu de la page N° 2

Installation Mounting to the Wall Mount Kit ■ NOTE: It is recommend to remove the Wall Mount Kit from the wall first. ◗ Mount the attachment to the Wall Mount Kit as show in the following diagram. A i r S t a t i o n W L E - W K S c r e w s (1 2m m ) A t t a c h me n t ◗ Align the attachment screw holes (for mounting this product) with the screw holes on the rear panel of the POE Receiver, and secure with the 5mm screws. ◗ With the POE Receiver attached to the Wall Mount Kit, mount the Wall M

Résumé du contenu de la page N° 3

Connections Connecting the Devices ■ WARNING: Always connect the Power Supply Adapter to the POE Receiver's POE port. Connecting to the LAN port may result in damage or burnout of the equipment. Connecting a hub or PC to the POE port may result in damage or burnout of the hub or PC. ◗ Connect the AirStation to the POE Receiver's LAN port.. ◗ Connect the DC cable to the DC connector on the AirStation. ◗ Connect the Power Supply Adapter to the POE Receiver's POE port using CAT5 (or highe

Résumé du contenu de la page N° 4

Specifications Specifications WLE-POE-R33 | WLE-POE-R7 100 Mbps (100BASE-TX) Transmission Rate 10 Mbps (10BASE-T) POE Port 100BASE-TX / 10BASE-T dual purpose port (for connecting the Power Supply Adapter) LAN Port 100BASE-TX / 10BASE-T dual purpose port (for connecting the AirStation) Input Power Supply 36 to 57 VDC Operating Power * 12.1W (Min.) | 10W (Min.) Maximum Output 9.1W / 7V / 1.3A | 6.6W / 3.3V / 2A power/voltage/c

Résumé du contenu de la page N° 5

FCC Statement FCC Statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

Résumé du contenu de la page N° 6

� �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � � �� �� � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � � �� � � � � �� � � � � � � � � � � � � � � � � � � � � � � � �

Résumé du contenu de la page N° 7

Notes This page intentionally left blank. 7

Résumé du contenu de la page N° 8

4030 W. Braker Ln. Suite 120 Austin, Texas 78759 Tel: 800-456-9799 Fax: 512-794-8606 Technical Support is available 24 hours a day, 7 days a week (USA / Canada) Toll-Free: 866-752-6210 email: info@buffalotech.com ©2004, Buffalo Technology (USA), Inc.