Résumé du contenu de la page N° 1
TL-PA2010P
AV200 Powerline Adapter with AC Pass Through
Rev: 1.0.0
1910010743
Résumé du contenu de la page N° 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES CO., L
Résumé du contenu de la page N° 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
Résumé du contenu de la page N° 4
Safety Information • When product has power button, the power button is one of the way to shut off the product; when there is no power button, the only way to completely shut off power is to disconnect the product or the power adapter from the power source. • Don’t disassemble the product, or make repairs yourself. You run the risk of electric shock and voiding the limited warranty. If you need service, please contact us. • Avoid water and wet locations. This product can be used in the
Résumé du contenu de la page N° 5
TP-LINK TECHNOLOGIES CO., LTD DECLARATION OF CONFORMITY For the following equipment: Product Description: AV200 Powerline Adapter with AC Pass Through Model No.: TL-PA2010P Trademark: TP-LINK We declare under our own responsibility that the above products satisfy all the technical regulations applicable to the product within the scope of Council Directives: Directives 2004 / 108 / EC, Directives 2006 / 95 / EC, Directives 2011/65/EU The above product is in conformity with the follow
Résumé du contenu de la page N° 6
CONTENTS Package Contents...........................................................................................................................................1 Chapter 1 Introduction ...............................................................................................................................2 1.1 Conventions ....................................................................................................................................................2 1.2 System
Résumé du contenu de la page N° 7
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Package Contents The AV200 Powerline Adapter with AC Pass Through package contains the following items: One AV200 Powerline Adapter with AC Pass Through (There are two AV200 Powerline Adapters with AC Pass Through in Starter Kit) One RJ-45 Ethernet Cable (There are two RJ-45 Ethernet Cables in Starter Kit) One Resource CD This Guide Management Utility Note: Make sure that the package contains the above items. If any of t
Résumé du contenu de la page N° 8
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Chapter 1 Introduction Congratulations on your purchase of this outstanding Powerline Adapter. This device is an AV200 Powerline Adapter with AC Pass Through which transforms your house’s existing electrical wiring into a ubiquitous networking infrastructure. Simply plug this AV200 Powerline Adapter with AC Pass Through into an ordinary AC power outlet which will easily extend your Cable/xDSL broadband connection or existing Ethern
Résumé du contenu de la page N° 9
TL-PA2010P AV200 Powerline Adapter with AC Pass Through 4. Do not expose this product to dampness, dust or corrosive liquids. 5. Do not connect this product or disconnect it from a wall socket during a lightning or a thunderstorm 6. Do not block the ventilation slots of this product, for insufficient airflow may harm it. 7. Do not put anything on this product. 8. Plug this product directly into a wall socket (100Vac~240Vac). Do not use an extension cord between this product and the AC po
Résumé du contenu de la page N° 10
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Chapter 2 Connecting Mechanism 2.1 Introduction The Powerline Adapter supports up to 200Mbps data rate. With this high speed connection rate, this Powerline Adapter allows you to setup a high speed home network by using your home existing electrical wiring. Simply plug this Powerline Adapter into an ordinary power outlet to extend your Cable/xDSL broadband connection or existing LAN network to any other electrical outlet in any roo
Résumé du contenu de la page N° 11
TL-PA2010P AV200 Powerline Adapter with AC Pass Through The Ethernet port is connected, but there is no data On being transferred. Ethernet LED Blinking The Ethernet port is transferring data. Off The Ethernet port isn’t connected. Note: 5 minutes after the device connected to the adapter is turned off, and the adapter will automatically switch to the power-saving Mode. In power-saving mode, the Homeplug cannot be accessed via the electrical wiring, but its integrated electrical s
Résumé du contenu de la page N° 12
TL-PA2010P AV200 Powerline Adapter with AC Pass Through The integrated electrical socket allows additional devices or multiple Integrated sockets to be connected to the adapter just like to a normal wall socket. Electrical Socket No electrical socket is lost. * The provided power plug may differ from the picture due to different regional power specifications. Here we take the EU version as an example. Note: 1. If you press the Pair button for more than 10 seconds, the Powerline Adap
Résumé du contenu de la page N° 13
TL-PA2010P AV200 Powerline Adapter with AC Pass Through 2.5 Hardware Connection – Computer For those computers you wish to be networked by Powerline Adapter, each of the computers must be properly connected with a Powerline Adapter through an Ethernet (RJ-45) cable. Following are the steps to properly connect the Powerline Adapter to your computer: 1． Connect one end of the provided Ethernet (RJ-45) cable to the Powerline Adapter’s Ethernet port. 2． Connect the other end of the Ethernet
Résumé du contenu de la page N° 14
TL-PA2010P AV200 Powerline Adapter with AC Pass Through The hardware connection mechanism is shown below: Note: Where the MAINS plug or an appliance coupler is used as the disconnected device, the disconnect device shall remain readily operable. The idle wall sockets or electrical outlets in your household electrical circuit can be used normally without interference from the network. 8
Résumé du contenu de la page N° 15
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Chapter 3 Installing Management Utility Please verify that no other Powerline Adapter or any Encryption Management Utilities are installed before installing the provided software. If other Powerline Utilities are installed, uninstall them and restart your personal computer before installing this provided software. Note: To install Management Utility, please make sure that WinPcap 4.1.2 has been installed in your computer. Othe
Résumé du contenu de la page N° 16
TL-PA2010P AV200 Powerline Adapter with AC Pass Through 10
Résumé du contenu de la page N° 17
TL-PA2010P AV200 Powerline Adapter with AC Pass Through 11
Résumé du contenu de la page N° 18
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Step 3: After the installation, a shortcut to the “Powerline Utility” application icon is provided on the windows desktop. 12
Résumé du contenu de la page N° 19
TL-PA2010P AV200 Powerline Adapter with AC Pass Through Chapter 4 Using the Management Utility After you’d successfully installed the Powerline Adapter hardware and Management Utility software, you can set up or configure the devices according to your need. This Powerline Utility enables the users to identify powerline devices on the powerline network, measures data rate performance and ensures privacy by setting user defined secure powerline networks. Double click on the icon “ ” fr
Résumé du contenu de la page N° 20
TL-PA2010P AV200 Powerline Adapter with AC Pass Through MAC Address: Displays the MAC address of the powerline adapter connected to the current computer where this management utility is running. Network Name: Displays the network name of the current network or you can give a name for the network in which the powerline adapter is. By default, the network name is HomeplugAV. Use Default (HomePlugAV): Check the box before this item to use the default network name. Apply: Click the App
