Résumé du contenu de la page N° 1
User Guide
TL-POE200
Power over Ethernet Adapter Kit
Rev:2.0.0
7106503932
Résumé du contenu de la page N° 2
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specifications may be reproduced in any form or by any means or used to make any derivative such as translation, transformation, or adaptation without permission from TP-LINK TECHNOLOGIES CO., LTD. Copyright © 2012 TP-LINK TECHNOLOGIES
Résumé du contenu de la page N° 3
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guar
Résumé du contenu de la page N° 4
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. CE Mark Warning This is a class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. Про д ук т с ер т ифі к о в ано згідно с пр авила ми сист е м и УкрСЕПРО на відповідність вимогам но р м а ти в них док у ментів та вимогам, що пер е дба че
Résumé du contenu de la page N° 5
CONTENTS Package Contents..........................................................................1 Chapter 1 Introduction .................................................................1 1.1 Overview of the Product....................................................1 1.2 Features............................................................................2 Chapter 2 Identifying External Components..............................2 2.1 PoE Injector.........................................
Résumé du contenu de la page N° 6
Package Contents The following items should be found in your package. TL-POE200 Power over Ethernet Adapter Kit Ethernet (CAT5 UTP) Cable Female-to-Female Power Connector 48V DC Power Adapter This User Guide Note: Make sure that the package contains the above items. If any of the listed items are damaged or missing, please contact your distributor. Chapter 1 Introduction 1.1 Overview of the Product Thank you for choosing the TL-POE200 Power over Ethernet Adapter Kit comp
Résumé du contenu de la page N° 7
1.2 Features Complies with IEEE 802.3, IEEE 802.3u standards Transmits electrical power along with data in one single cable Supports optional 5V DC , 9V DC or 12V DC power supply Supports Plug-and-Play for the devices, without any configuration Elegant appearance with space-saving miniature size Chapter 2 Identifying External Components 2.1 PoE Injector POWER+DATA OUT: Connect to the PD or PoE Receiver Adapter with a CAT5 UTP cable. 2
Résumé du contenu de la page N° 8
LAN IN: Connect to a DC 48V: Connect to the network device (such as provided power adapter a Switch or Router) with which can supply steady CAT5 UTP cable. power of 48V DC. PWR: Power LED, a steady green light indicates that the power adapter is working properly. 2.2 PoE Splitter POWER+DATA IN: Power-mode switch: Connect to the PSE You can choose the DC or PoE Injector with output of 12V, 9V or 5V a CAT5 UTP cable. by turning the switch to the left or right. Please make su
Résumé du contenu de la page N° 9
DC OUT: Connect to the LAN OUT: Connect to power port of the Ethernet the Ethernet device with CAT5 UTP cable device with the provided to transmit data. power cable to supply the power of 5V, 9V or 12V DC. PWR: Power LED, a steady green light indicates that the PoE Injector can supply power. Note: TL-POE200 Power over Ethernet Kit is not compliant with IEEE 802.3af standard. The TL-POE200A (PoE Injector) and TL-POE200B (PoE Splitter) can only be operated together. Pairing the d
Résumé du contenu de la page N° 10
Step 1: Insert one end of a Cat 5 Ethernet RJ45 Cable into the LAN IN port of the PoE Injector, and connect the other end of the cable to your network Switch or PC. Note: Do not mistake the LAN IN port with the POWER+DATA OUT port. Plugging the Ethernet cable into the wrong Ethernet port may cause serious damage to your network devices. Step 2: Plug one end of the Power Adapter into the DC 48V port of the PoE Injector and the other end into your electrical outlet. The green PWR L
Résumé du contenu de la page N° 11
6
Résumé du contenu de la page N° 12
Appendix: Specifications Normal IEEE 802.3, IEEE 802.3u, Standards CSMA/CD, TCP/IP Voltage Output DC 5V, 9V or 12V Output Power 12V/1A, 9V/1A, 5V/2A 1 10/100Mbps Auto-Negotiation RJ45 LAN port TL-POE200A 1 10/100Mbps Auto-Negotiation RJ45 PoE port 1 48VDC Power Input Port Ports 1 10/100Mbps Auto-Negotiation RJ45 LAN port TL-POE200B 1 10/100Mbps Auto-Negotiation RJ45 PoE port 1 12/9/5V DC Power Output Port Cabling Type RJ45 CAT5 UTP cable LED PWR Safety & Emissions FCC, C
