Résumé du contenu de la page N° 1
®
SUPER
SUPERSERVER 6014L-T
USER’S MANUAL
Revision 1.0
Résumé du contenu de la page N° 2
The information in this User’s Manual has been carefully reviewed and is believed to be accurate. The vendor assumes no responsibility for any inaccuracies that may be contained in this document, makes no commitment to update or to keep current the information in this manual, or to notify any person or organization of the updates. Please Note: For the most up-to-date version of this manual, please see our web site at www.supermicro.com. SUPERMICRO COMPUTER reserves the right to make chang
Résumé du contenu de la page N° 3
Preface Preface About This Manual This manual is written for professional system integrators and PC technicians. It provides information for the installation and use of the SuperServer 6014L-T. Instal- lation and maintenance should be performed by experienced technicians only. The SuperServer 6014L-T is a high-end dual processor rackmount server based on the SC811LT-260 1U rackmount server chassis and the Super X6DLP-EG2 serverboard. The X6DLP-EG2 supports Intel® Xeon® LV or ULV processor
Résumé du contenu de la page N° 4
SUPERSERVER 6014L-T User's Manual Chapter 4: System Safety You should thoroughly familiarize yourself with this chapter for a general overview of safety precautions that should be followed when installing and servicing the SuperServer 6014L-T. Chapter 5: Advanced Serverboard Setup Chapter 5 provides detailed information on the X6DLP-EG2 serverboard, including the locations and functions of connectors, headers and jumpers. Refer to this chap- ter when adding or removing processors or main
Résumé du contenu de la page N° 5
Preface Notes v
Résumé du contenu de la page N° 6
SUPERSERVER 6014L-T User's Manual Table of Contents Preface About This Manual ...................................................................................................... iii Manual Organization ................................................................................................... iii Chapter 1: Introduction 1-1 Overview ......................................................................................................... 1-1 1-2 Serverboard Features ...............
Résumé du contenu de la page N° 7
Table of Contents Power ....................................................................................................... 3-3 3-4 Serial ATA Drive Carrier LEDs ......................................................................... 3-3 Chapter 4: System Safety 4-1 Electrical Safety Precautions .......................................................................... 4-1 4-2 General Safety Precautions ........................................................................... 4-2 4-
Résumé du contenu de la page N° 8
SUPERSERVER 6014L-T User's Manual Speaker/Power LED/Keylock ................................................................. 5-16 Wake-On-Ring ........................................................................................ 5-16 Wake-On-LAN ........................................................................................ 5-16 Power Fault ............................................................................................ 5-17 ATX PS/2 Keyboard and PS/2 Mouse Ports ..
Résumé du contenu de la page N° 9
Table of Contents Chapter 7: BIOS 7-1 Introduction ..................................................................................................... 7-1 7-2 Main Setup ..................................................................................................... 7-2 7-3 Advanced Settings .......................................................................................... 7-3 7-4 Boot Settings .................................................................................
Résumé du contenu de la page N° 10
SUPERSERVER 6014L-T User's Manual Notes x
Résumé du contenu de la page N° 11
Chapter 1: Introduction Chapter 1 Introduction 1-1 Overview The SuperServer 6014L-T is a high-end dual processor, 1U rackmount server featur- ing state-of-the-art technology. The 6014L-T is comprised of two main subsystems: the SC811LT-260 1U rackmount chassis and the X6DLP-EG2 serverboard. Please refer to our web site for information on operating systems that have been certifi ed for use with the 6014L-T (www.supermicro.com). In addition to the serverboard and chassis
Résumé du contenu de la page N° 12
SUPERSERVER 6014L-T User's Manual 1-2 Serverboard Features At the heart of the SuperServer lies the X6DLP-EG2, a dual processor serverboard based on Intel's E7520 chipset and designed to provide maximum performance. Below are the main features of the X6DLP-EG2. Processors The X6DLP-EG2 supports single or dual Intel® Xeon® LV or ULV processors in 479-pin PGA sockets. Please refer to our web site for a complete listing of sup- ported processors (www.supermicro.com). Memory The X6DLP-EG2
Résumé du contenu de la page N° 13
Chapter 1: Introduction Onboard Controllers/Ports An onboard IDE controller supports up to four UltraDMA/100 hard drives or ATAPI devices. Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, PS/2 mouse and keyboard ports and two GLAN (NIC) ports. Other Features Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.
Résumé du contenu de la page N° 14
SUPERSERVER 6014L-T User's Manual CPU1 CPU2 667 MT/s DDR2-400 Group A DIMM 1A Links0-7 8x PCI-Express (Slot 6) DIMM 2A DIMM 3A 8x PCI-Express (Slot 3) Group B DIMM 4A E7520 Links0-7 MCH DIMM 1B LAN 82573 DIMM 2B DIMM 3B 82573 LAN DIMM 4B PCI-X 66 MHz (Slot 6) SATA Ports (4) PCI-X 66 MHz (Slot 5) 6300ESB IDE (ATA133) PCI 33 MHz (Slot 1) USB Ports (4) ATI LPC Rage BIOS S I/O IPMI Kybd/ COM Floppy Mouse Ports Figure 1-1 . Intel E7520 Chipset: System Block Diagram Note: This is a general block
Résumé du contenu de la page N° 15
Chapter 1: Introduction 1-3 Server Chassis Features The following is a general outline of the main features of the SC811LT-260 chas- sis. System Power When confi gured as a SuperServer 6014L-T, the SC811LT-260 chassis includes a single 260W power supply. Serial ATA Subsystem For the 6014L-T, the SC811LT-260 chassis was designed to support two Serial ATA hard drives, which are hot-swappable units. Note: The operating system you use must have RAID support to enable the hot- swap capability of t
Résumé du contenu de la page N° 16
SUPERSERVER 6014L-T User's Manual Figure 1-2. Rear I/O Panel Cooling System The SC811LT-260 chassis has an innovative cooling design that features three 4-cm high-performance system cooling fans. Each of these fans plug into a chassis fan header on the serverboard. An air shroud channels the airfl ow generated by the fans to effi ciently cool the processor area of the system. A fan speed control setting in BIOS allows fan speed to be determined by sy
Résumé du contenu de la page N° 17
Chapter 1: Introduction 1-4 Contacting Supermicro Headquarters Address: SuperMicro Computer, Inc. 980 Rock Ave. San Jose, CA 95131 U.S.A. Tel: +1 (408) 503-8000 Fax: +1 (408) 503-8008 Email: marketing@supermicro.com (General Information) support@supermicro.com (Technical Support) Web Site: www.supermicro.com Europe Address: SuperMicro Computer B.V. Het Sterrenbeeld 28, 5215 ML 's-Hertogenb
Résumé du contenu de la page N° 18
SUPERSERVER 6014L-T User's Manual Notes 1-8
Résumé du contenu de la page N° 19
Chapter 2: Server Installation Chapter 2 Server Installation 2-1 Overview This chapter provides a quick setup checklist to get your SuperServer 6014L-T up and running. Following the steps in the order given should enable you to have the system operational within a minimal amount of time. This quick setup assumes that your 6014L-T system has come to you with the processor and memory preinstalled. If your system is not already fully integrated with a serverboard, pr
Résumé du contenu de la page N° 20
SUPERSERVER 6014L-T User's Manual Choosing a Setup Location - Leave enough clearance in front of the rack to enable you to open the front door completely (~25 inches). - Leave approximately 30 inches of clearance in the back of the rack to allow for suffi cient airfl ow and ease in servicing. - This product is for installation only in a Restricted Access Location (dedicated equipment rooms, service closets and the like). Warnings and Precautions! ! ! Rack Precautions - Ensure that
