Résumé du contenu de la page N° 1
2
RangeLAN2 Serial Adapter
Models 7910 and 7911
User’s Guide
Résumé du contenu de la page N° 2
Copyright © 1999 Proxim, Inc., Sunnyvale, CA. All rights reserved. This manual and the software described in it are copyrighted with all rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language in any form by any means without the written permission of Proxim, Incorporated. Trademarks RangeLAN, the RangeLAN logo, RangeLAN2, and Proxim are trademarks of Proxim, Inc. All other trademarks are the property
Résumé du contenu de la page N° 3
Warranty Return Policy If you have a problem with your RangeLAN2 product, please call Proxim Technical Support at (408) 731-2640. Proxim Technical Support will assist with resolving any technical difficulties you may have with your Proxim product. If your product is found to be defective, you may return the product to Proxim after obtaining an RMA (Return Materials Authorization) number from Proxim Technical Support. The product must be returned in its original packaging. The RMA number should b
Résumé du contenu de la page N° 4
Contents 1. Introduction .................................................................1 The RangeLAN2 Family ......................................................................... 2 System Requirements .............................................................................. 3 The Product Package ............................................................................... 3 2. Quick Installation ........................................................5 3. Wireless Topologies ....
Résumé du contenu de la page N° 5
10. Advanced Configuration Menu..............................55 Advanced Parameters ............................................................................ 56 11. Display Parameter Values ......................................61 12. View Statistics .........................................................63 Serial Errors Statistics ........................................................................... 64 Packetized Mode Statistics .......................................................
Résumé du contenu de la page N° 6
D. Parameters ..............................................................107 Radio Parameters ................................................................................. 107 Network Parameters............................................................................. 108 Serial Parameters ................................................................................. 109 Advanced Configuration Parameters................................................... 110 E. Procedure for Downloa
Résumé du contenu de la page N° 7
1. Introduction Congratulations on your purchase of the RangeLAN2 791x Serial Adapter, the radio module that replaces RS-232 serial cables with wireless RF (Radio Frequency) technology. By attaching a pair of RangeLAN2 Serial Adapters to the serial port of any two devices, you can transmit and receive data without the use of wires. The RangeLAN2 791x can support several data rates and uses the same patented 2.4 GHz frequency hopping spread spectrum (FHSS) technology as found within Proxim’s aw
Résumé du contenu de la page N° 8
The RangeLAN2 Family RangeLAN2 791x Serial Adapter is part of a family of high- performance products that provides a complete wireless net- working solution. ❑ RangeLAN2 7100 is a wireless LAN adapter that fits into a standard PC/AT ISA bus slot. ❑ RangeLAN2 7400 is a wireless LAN adapter which fits into a PCMCIA Type II slot on a portable notebook, laptop, or pen-based computer. ❑ RangeLAN2 7510/752x Access Points allow RangeLAN2 products to seamlessly connect to a wired Ethernet network. ❑ Ran
Résumé du contenu de la page N° 9
System Requirements To begin using your RangeLAN2 791x Serial Adapter, you need the following minimum system requirements: ❑ At least one (1) device with a free RS-232 (serial) port (terminal, PC, etc.). ❑ At least one (1) other RangeLAN2 product. If the Serial Adapters are acting as a replacement for a serial cable, this additional RangeLAN2 product must be a second 791x Serial Adapter which will attach to a free RS-232 port on another device. The Product Package Each RangeLAN2 791x Serial Ada
Résumé du contenu de la page N° 10
Figure 1 RangeLAN2 791x Serial Adapter Components 4
Résumé du contenu de la page N° 11
2. Quick Installation You may follow the quick installation and configuration steps if all of the following conditions are true: ❑ You will use all of the software default values. ❑ You are using two (2) RangeLAN2 Serial Adapters as a replacement for an RS-232 cable. ❑ You are using no more than nine (9) pairs of Serial Adapters in one location. Follow the steps below to install two RangeLAN2 791x Serial Adapters: 1. Firmly screw the antenna onto its connector in a clock- wise rotation. The ant
Résumé du contenu de la page N° 12
Figure 2 Attachment of the RangeLAN2 Serial Adapter Antenna 2. Attach one end of an RS-232 cable to the RangeLAN2 Serial Adapter and the other end to a free serial port of a communication device, such as a terminal or a com- puter. Perform this step with both Serial Adapters. 3. Each RangeLAN2 791x Serial Adapter is preconfigured to operate as a Station. Therefore, before two Serial Adapters will communicate, one must be set as a Mas- ter. Using the Station/Master rotary switch on the undersi
Résumé du contenu de la page N° 13
4. Each RangeLAN2 791x Serial Adapter is preconfigured to use Domain 0. If you have multiple pairs of Serial Adapters and each pair consists of one Master and one Station, set each pair to a unique Domain number. Using the Domain rotary switch on the underside of the RangeLAN2 Serial Adapter, set each pair to a unique Domain number from 0-8 to ensure minimal interfer- ence. If you decide to use Domain 8, refer to Chapter 5 for information concerning this switch setting’s role in the Pairing Dom
Résumé du contenu de la page N° 14
8
Résumé du contenu de la page N° 15
3. Wireless Topologies The RangeLAN2 Serial Adapter supports numerous wireless topologies. The following sections describe four (4) basic wireless configurations supported by the RangeLAN2 Serial Adapter: Point-to-Point, Point-to-Multipoint, Point-to-Point using RangeLAN2 Infrastructure, and Point-to-Multipoint using a RangeLAN2 Access Point as a Base Unit. Point-to-Point In this topology, a pair of RangeLAN2 Serial Adapters are configured to exclusively communicate with each other. Figure 3
Résumé du contenu de la page N° 16
In Figure 3 above, Serial Adapters 1 and 2 can communicate with each other, as can Serial Adapters 3 and 4. Even though all four units may be in range of one another and may “hear” the others’ messages, each unit will filter out messages not intended for it. Since this topology establishes a one-to-one, Master- Station relationship between two Serial Adapters, it acts as a wireless substitute for an RS-232 cable in a wide variety of applications. Using the TCP/IP protocol as the transport mech
Résumé du contenu de la page N° 17
Point-to-Multipoint The RangeLAN2 Serial Adapter may also operate in a Point-to- Multipoint topology. This configuration provides added flexibil- ity, allowing one centralized unit, operating in Packetized mode, to communicate with multiple units placed in remote locations. When operating in Packetized mode, a central Serial Adapter may be programmed to send either directed messages or broad- casts to other Serial Adapters, by specifying the appropriate IP address and send mode. The Packetized
Résumé du contenu de la page N° 18
Figure 4 Point-to-Multipoint 12
Résumé du contenu de la page N° 19
Point-to-Point Using RangeLAN2 Infrastructure You may also use your existing RangeLAN2 infrastructure and network to increase the range and flexibility of communications between Serial Adapters. A Serial Adapter configured as a Station may synchronize to a RangeLAN2 Access Point which has the same Domain and Security ID. Two Serial Adapters which are positioned out of range of one another, can be set as Stations so that each will synchronize to a RangeLAN2 Access Point. Then, the Access Point(
Résumé du contenu de la page N° 20
Figure 5 Point-to-Point Using RangeLAN2 Infrastructure 14
