Instruction d'utilisation Paxar AC Adapter Monarch 6063TM

Résumé du contenu de la page N° 1

AC ADAPTER OPERATING
INSTRUCTIONS
The Monarch® 6063™ AC Adapter provides continuous power to your
Monarch® Pathfinder® Ultra® Silver 6032™ and the Monarch®
Pathfinder® Ultra® Platinum 6039™ printers. You can use the adapter
instead of a rechargeable battery. The adapter plugs into any standard
grounded electrical outlet and allows you to print large volumes of labels
without switching or recharging the battery.
New Door
Adapter Pack
Power Supply
Power Cord
Kit Contents
The AC Adapter

Résumé du contenu de la page N° 2

Installing the Adapter To install the adapter: 1. Press the button on the battery compartment door (located at the bottom of the printer’s handle) and slide it open, pulling firmly. Pull the door completely off the printer and lay it aside. 2. Pull the battery out of the compartment. Or, place your hand beneath Battery Compartment Door Button the printer, turn the printer upright, and catch the battery in your hand as it slides out. 3. Insert the adapter pack (connector end first)

Résumé du contenu de la page N° 3

4. Pushing firmly, put the new battery compartment door on the printer. The adapter pack cord should stick out of the notch in the door. 5. Connect the adapter pack and the power supply by lining up the connectors and screwing them together. Notch 6. Plug the power cord into the power supply. 7. Plug the other end of the power cord into a grounded electrical outlet. Installing the Adapter 3

Résumé du contenu de la page N° 4

Visit www.paxar.com for sales, service, supplies, information, and telephone numbers for our locations throughout the world. TOLL FREE: 1-800-543-6650 (U.S.A.) 1-800-363-7525 (Canada)