Résumé du contenu de la page N° 1
USER
MANUAL
MODEL 2172
CopperLINK™ High Speed
Ethernet Extenders
Part# 07M2172-UM SALES OFFICE
Doc# 03333U2-001
(301) 975-1000
Rev. A
TECHNICAL SUPPORT
Revised 10/24/06
(301) 975-1007
An ISO-9001Certified
Company
Résumé du contenu de la page N° 2
CONTENTS 1.0 Warranty Information ................................................................. 4 1.1 Compliance................................................................................... 4 EMC Compliance:......................................................................... 4 Safety Compliance: ...................................................................... 4 1.2 Radio and TV Interference (FCC Part 15) .................................... 4 1.3 Declaration o
Résumé du contenu de la page N° 3
C.1 10/100Base-T Interface .............................................................. 20 RJ-45.......................................................................................... 20 C.2 CopperLINK Interface ................................................................. 20 RJ-45.......................................................................................... 20 Terminal Block............................................................................ 20 D Distance Ch
Résumé du contenu de la page N° 4
1.0 WARRANTY INFORMATION Patton Electronics warrants all Model 2172 components to be free from defects, and will—at our option—repair or replace the product should it fail within one year from the first date of the shipment. This warranty is limited to defects in workmanship or materials, and does not cover customer damage, abuse or unauthorized modification. If this product fails or does not performs as warranted, your sole recourse shall be repair or replacement as descri
Résumé du contenu de la page N° 5
television reception, which can be determined by disconnecting the cables, try to correct the interference by one or more of the following measures: moving the computing equipment away from the receiver, re- orienting the receiving antenna, and/or plugging the receiving equipment into a different AC outlet (such that the computing equipment and receiver are on different branches). 1.3 DECLARATION OF CONFORMITY We certify that the apparatus identified in this document conforms
Résumé du contenu de la page N° 6
1.5 SAFETY WHEN WORKING WITH ELECTRICITY • This device contains no user serviceable parts. The equipment shall be returned to Patton Electronics for repairs, or repaired by qualified service personnel. • Mains Voltage: Ensure that the external power adapter is a listed Limited Power Source. The mains outlet that is utilized to power the devise shall be within 10 feet (3 meters) of the device, shall be easily accessible, and protected by a circuit breaker. Ensure that the power cable u
Résumé du contenu de la page N° 7
2.0 GENERAL INFORMATION Thank you for your purchase of this Patton Electronics product. This product has been thoroughly inspected and tested and is warranted for one year for parts and labor. If any questions or problems arise during installation or use of this product, contact Patton Electronics Technical Support at +1 (301) 975-1007. 2.1 FEATURES • Variable rate CopperLINK extender - Easy to configure • Auto-MDIX Ethernet • Configurable 10/100, Full/Half, and Auto-Negotiating Et
Résumé du contenu de la page N° 8
Figure 1. Typical application The pair of 2172 models work together to create a transparent extension between two peered Ethernet LANs. Figure 1 shows a typical point-to- point application. 3.0 INSTALLATION The Interconnecting cables shall be acceptable for external use and shall be rated for the proper applica- tion with respect to voltage, current, anticipated tem- CAUTION perature, flammability, and mechanical serviceability. To install the 2172 Ethernet Extender, do the followin
Résumé du contenu de la page N° 9
2172 (RJ-45) 2172 (Terminal block) Power jack Power Ethernet jack port Local/Remote switch Ethernet CopperLINK twisted-pair port Local/Remote RJ-45 interface switch CopperLINK twisted-pair terminal block interface Figure 2. Model 2172 standalone rear panel 3.1 CONNECTING THE TWISTED-PAIR LINE INTERFACE The Interconnecting cables shall be acceptable for external use and shall be rated for the proper applica- tion with respect to voltage, current, anticipated tem- CAUTION perature,
Résumé du contenu de la page N° 10
19 (0.9mm) and 26 AWG (0.4mm). Leased circuits that run through signal equalization equipment are not acceptable. 2. The Model 2172 is equipped with either an RJ-45 or a terminal block interface jack that can be used on the CopperLINK interface. These CopperLINK interfaces are a two-wire interface. Observe the signal/ pin relationships on the Model 2172's CopperLINK interface jacks. The Line port has been classified as TNV-1 and is approved for connection to a PSTN TNV-1 circuit. W
Résumé du contenu de la page N° 11
RING TIP Figure 4. Model 2172 (Terminal Block) twisted pair line interface. 3.2 CONNECTING THE 10/100BASE-T ETHERNET INTERFACE The Interconnecting cables shall be acceptable for external use and shall be rated for the proper applica- tion with respect to voltage, current, anticipated tem- CAUTION perature, flammability, and mechanical serviceability. The shielded RJ-45 port labeled Ethernet is the Auto-MDIX10/100Base- T interface. This port is designed to connect directly to a 10/100
Résumé du contenu de la page N° 12
3.3 CONNECTING POWER The Interconnecting cables shall be acceptable for external use and shall be rated for the proper applica- tion with respect to voltage, current, anticipated tem- CAUTION perature, flammability, and mechanical serviceability. The Model 2172 does not have a power switch, so it powers up as soon as it is plugged in. An external AC or DC power supply is available separately. This connec- tion is made via the barrel jack on the rear panel of the Model 2172. No configu
Résumé du contenu de la page N° 13
CopperLINK™ High Speed Ethernet Extender Power Link Ethernet S2 S2 Figure 6. Removing protective cover Figure 7 on page 13 shows the orientation of the DIP switches in the On and Off positions. S2 ON 1234 5 6 7 8 Front Rear S2 Switch toggle Push toggle up ON for ON position Push toggle down for 1234 5678 OFF position Figure 7. DIP switch orientation 13 ON 5 7 8 1234 6
Résumé du contenu de la page N° 14
4.2 CONFIGURING DIP SWITCH S2 DIP switch S2 is where you configure the CopperLINK line rate, symmet- ric or asymmetric, Ethernet, and Ethernet Shutdown. Table 1 summa- rizes default positions of DIP switches S2-1 through S2-8. Detailed descriptions of each switch follow the table. Table 1: S2 Summary Position Description S2-1 Symmetric/Asymmetric S2-2 Line Rate S2-3 Line Rate S2-4 Ethernet configuration S2-5 Ethernet configuration S2-6 Ethernet configuration S2-7 Ethernet Shutd
Résumé du contenu de la page N° 15
Table 4: Asymmetric CopperLINK Line Rates Selection Chart S2-2 S2-3 Asymmetric Line Rates DS/US ON ON 50 Mbps/2 Mbps ON OFF 16 Mbps/2 Mbps OFF OFF 4 Mbps/1 Mbps Switches S2-4, S2-5 and S2-6: Ethernet Configuration Use switches S2-4, S2-5 and S2-6 to configure Ethernet settings. Table 5: Ethernet configurations S2-4 S2-5 S2-6 Ethernet Configurations ON ON ON Auto-Negotiate ON ON OFF 100Mb Full Duplex ON OFF ON 100Mb Half Duplex ON OFF OFF 10Mb Full Duplex OFF ON ON 10Mb Hal
Résumé du contenu de la page N° 16
operating mode and Ethernet Shutdown mode configuration. The S2-8 switch does not affect the data rate. The data rate will always follow the L configuration. 5.0 OPERATION Once the Model 2172s are properly installed, they should operate trans- parently. No user settings required. This section describes reading the LED status monitors. 5.1 POWER UP Before applying power to the Model 2172, please review section 3.3, “Connecting Power” on page 12 to verify that the unit is connected t
Résumé du contenu de la page N° 17
Ethernet LED Power LED Link LED Figure 8. Model 2172 standalone unit front panel Table 8: Front panel LED description LED Description PWR Solid GREEN to indicate the unit is powered on. LINK Solid GREEN (ON) to indicate that the end-to-end CopperLINK link between the Model 2172s is estab- lished. The Link LED is OFF when the link is down. ETH Solid GREEN indicates that 10/100Base-T Ethernet link has been established. Flashes to indicate activity. 17 CopperLINK High Speed Ethernet Exten
Résumé du contenu de la page N° 18
APPENDIX A SPECIFICATIONS A.1 LAN CONNECTION • Shielded RJ-45, 10/100Base-T, IEEE 802.3 Ethernet • CopperLINK Connection: RJ-45 or Terminal Block A.2 TRANSMISSION LINE Two-wire unconditioned twisted pair. A.3 COPPERLINK LINE RATE AND COPPERLINK DISTANCE • Line Rate: 50 Mbps, symmetric upstream/downstream. Additional symmetric and asymmetric rates are available via DIP switch settings. • Distance: 6,000 ft (1.8 km) at 1 Mbps upstream/4 Mbps downstream Note Distanc
Résumé du contenu de la page N° 19
APPENDIX B MODEL 2172 SERIES FACTORY REPLACEMENT PARTS AND ACCESSORIES Patton Model # Description Base Models 2172/E CopperLINK Multi Rate 50 Mbps Ethernet Extender; No power supply 2172/E-2PK CopperLINK Multi Rate 50 Mbps Ethernet Extender Kit (2 units pre- set to local and remote); No power supply 2172/EUI-2PK CopperLINK Multi Rate 50 Mbps Ethernet Extender Kit (2 units pre- set to local and remote); 110-240VAC 07M2172-UM User Manual Power Supplies 08055DCUI 100-240VAC (+5V reg.
Résumé du contenu de la page N° 20
APPENDIX C MODEL 2172 SERIES INTERFACE PIN ASSIGNMENT C.1 10/100BASE-T INTERFACE RJ-45 • Pin 1: TX+ • Pin 2: TX- • Pin 3: RX+ • Pin 6: RX- • Pins 4, 5, 7, 8: no connection C.2 COPPERLINK INTERFACE RJ-45 • Pin 4: RING • Pin 5: TIP • Pins 1, 2, 3, 6, 7, 8: no connection Terminal Block RING TIP Figure 1. Model 2172 (Terminal Block) twisted pair line interface.. 20 Made in the USA Ethernet Power Rem Loc
